Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Fire barriers prevent the spread of fire through spaces, slowing down flames to allow evacuation of buildings, leaving escape routes clear, and potentially stopping properties from further damage. Use them in walls, floors and ceilings in commercial and industrial settings to seal rooms from fire escaping or from being attacked by spreading fire.
At Rawlins Paints we stock a full range of fire barrier products to help protect properties through compartmentalisation of spaces, including smaller accessories for sealing up spaces around fire barriers and penetrations through them caused by pipes, cables and services such as trunking and conduits.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
Intumescent Coated Slabs for use as a permanent fireproof barrier in walls, floors and ceilings. Intumescent coating on both sides of the slab/batt expands in fire, sealing against smoke. Ideal for raised floors in computer rooms Can be cut easily, allowing services through Offers acoustic protection Up to 4 hours of fire protection...
Intumescent Coated Non Fibrous Slabs create a fire barrier in walls, floors & ceilings where non-fibrous material is required, such as hospitals, computer rooms, & other sterile areas. 50mm thick fire-stop sponge batts Up to 2 hours fire protection Easy to cut & shape Fit around pipes, wires and existing services Intumescent...
Metal Support Battens are used with Envirograf Intumescent Slabs when dealing with floor openings larger than 800mm. The bracket offers support to firebreaks installed in floors. Use with Envirograf products 4, 5 & 6. Priced per metre - use quantities for each metre required
30mm Wire Mesh supports intumenscent slabs in floors, walls and ceilings, as well as when using fire mortar over a large surface area. Priced per metre - use quantities for each metre required 1200mm width Use with Envirograf Fire Mortar (Product 6) Use with SUP Metal Fixing Battens (Product 6)
Fireproof Coating for Slabs is a white, solvent-free coating for rock fibre and non-fibrous slabs and fire batts, such as Envirograf Product 4 and Product 5, providing extra fire protection. Apply with brush or trowel Solvent-free Water based Ready to use
Nullifire FB805 Fire Curtain is lightweight, flexible fire curtain which provides a barrier to smoke and flames. It consists of a specially coated glass fabric material.This is stretched between perimeter fixings and staple jointed for maximum effectiveness. FB805 is suitable for up to 30 minutes fire resistance - refer to performance table.
Nullifire FB810 Fire Curtain is a lightweight, flexible fire curtain which provides a barrier to smoke and flames. It consists of a specially coated glass fabric material.This is stretched between perimeter fixings and staple jointed for maximum effectiveness. FB810 is suitable for 60-120 minutes fire resistance - See performance table for 120 minute...
Fix the FB 90/100 Fire Barrier Curtain With Radiant Heat Protection to timber & steel trusses, between concrete soffits and suspended ceilings, etc, with up to an hour of fire protection. See below for references & accessories Curtains priced per linear metre Supplied with metal fixings for timber Adhesive supplied for overlapping Easy to cut &...
FB30 Fire Barrier Curtain - Red 1mm-thick reinforced glass cloth impregnated with intumescent, easy to fix to steel & timber trusses, & between concrete soffits & suspended ceilings. See below for references & accessories Curtains priced per linear metre Doesn't shed fibres Ideal for hospitals & clean areas...