Filter By

Hydron Nu-Flame Fire Upgrade System (For Timber)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only

Price £352.35 Regular price £391.50
In stock

Sherwin-Williams Macropoxy 400

Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...

Price £58.12 Regular price £64.58
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock
All sale products

Need Help?

Fire Door Seals

Upgrade fire doors with rebated and surface-mounted seals; extra fire protection for frames, edges of fire doors and behind door frames.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.

There are 4 products.

Showing 1-4 of 4 item(s)

Active filters

Envirograf Rebated Intumescent Fire Seals

Envirograf Rebated Intumescent Fire Seals are intumescent self-adhesive seals for rebating, supplied in lengths of 1050mm & 2020mm. Available in white, brown, black red and real wood veneer or polished aluminium face finishes. These seals offer 30 & 60min protection and are for use in frames, edges of fire doors and behind door frames....

Price £1.18
In stock

Envirograf Surface Mounted Intumescent Fire & Smoke Seals

Envirograf Surface Mounted Intumescent Fire and Smoke Seals are surface-mounted intumescent fire or fire and smoke seals providing up to 1 hour fire protection, available in a range of colours and wood veneer finishes. Supplied as a pack with intumescent paper for use around lock and hinge areas. An alternative plain seal without brush seal to...

Price £24.63
In stock

Envirograf Replacement Hardwood Door Edging

Envirograf Replacement Hardwood Door Edges are supplied to fit doors with a thickness between 40mm and 56mm, and it is supplied in 2100mm lengths. It is a complete door edge with concealed intumescent and smoke available for gaps 3mm, 5mm, 7mm and with brushes available for other gap sizes. Ideal for use in heavy-traffic areas prone to damage,...

Price £55.24
In stock