Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
There are 12 products.
Active filters
Nullifire (Firetherm) FO230/FO323 Slotted Steel Angles and Straps for securing fire barriers above partition walls in fire stopping applications.Made from DX51D+Z275 NAC galvanised steel 20 x 6mm slotted holes @ 300mm Ctrs in centre on both sides of angle and centre of strap. Meets relevant British Standards - see description below for...
Use Nullifire (Firetherm) PR102 PE Joint Backer Rods to control sealant depth in sealant joints, avoiding 3-sided adhesion. Please note: Selected items are Made To Order subject to a MOQ and an extended lead time - see 'Size Reference' below More Information Delivery Info
Protecta Mineral Fibre Bio Backing Material, made from special alkaline earth silicate (AES) fibres that have been uniquely engineered to offer advantages in high temperature and insulation applications, with low thermal conductivity and heat storage and excellent resistance to thermal shock. Considered a superior alternative to stonewool...
Firefly Staple Guns and Staples are a range of manual and pneumatic staple guns and staples for use during the installation of the Firefly range of barriers and Firefly Collaroll.Available Staple Guns and Staples:Firefly R31 Manual Staple Gun - R31 8mm and 12mm stainless steel staples are suitable with this product Firefly B16 Manual...
Firefly Galvanised Angles are an essential accompaniment for use during the installation of Firefly Fire Barriers.Available in three sizes 25mm x 25mm x 3600mm (Pack of 10) 50mm x 25mm x 3600mm (Pack of 10) 50mm x 50mm x 3600mm (Pack of 10)Galvanised Steel See the Order References Table below for further details Please refer...
Nullifire FJ203 Fire Resistant Backer Rod is a firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc.Can be used...
Accessories for use with Quelfire fire stopping products and systems.More Information Delivery Info
Rockwool SP Firestop Fixing Brackets are used in conjunction with Rockwool SP FireStop Slab to form the Rockwool SP Firestop System.Supplied in three standard sizes; SP/S (small), for cavity widths up to 100mm, SP/L (large) for up to 400mm and SP/XL for up to 600mm Supplied in cardboard boxes of 50 pieces, flat packed and designed to be...
Rockwool Black Aluminium Foil Tape has been designed for taping exposed edges and board joints of the Firepro DuctRock System.Easily applied, quality finish Supplied in a 75mm x 50m roll, box of 16More Information Delivery Info
Rockwool Fire Barrier System Ancillaries are used in conjunction with Rockwool Fire Barriers and comprise of Fire Barrier Support Angles and Clamping Plates.Suitable for void heights of up to 10.5 metres, supported by a stitched wire mesh Patented ‘quick-fit’ system for up to 1 hour fire resistanceSupport Angles 3m x 34mm x 75mm, 10...
A high performance, standard vision intumescent air transfer grille for doors, walls and ducts. To be used where air movement/flow via fan is stopped in the event of a fire. Provides excellent airflow characteristics, which result in low sound power level and efficient operation in normal use.Can be used to provide up to 60 minutes...
A high performance, circular standard vision intumescent air transfer grille for doors, walls and ducts. Ideal for toilet extraction systems in residential premises, hotels and many other buildings. The design allows space savings, ease of installation and avoids the need for operational function checks.Can be used to provide up to 60...
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
