- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Fire Stopping Accessories
Ensure correct installation and long-term performance of your fire protection systems with our comprehensive range of fire stopping accessories. From fixings and support brackets to sleeves, rods and backing materials, these essential components support the correct application of fire stops, cavity barriers and sealing compounds. Integrate with Fire Stopping systems and Door Upgrade Kits to help maintain full fire compartmentation and compliance with UK regulations.
Nullifire FO230/FO323 Slotted Steel Angles & Straps
For securing fire barriers above partition walls in fire stopping applications. Made from DX51D+Z275 NAC galvanised steel 20 x 6mm slotted holes @ 300mm Ctrs in centre on both sides of angle and centre of strap. Meets relevant British Standards - see description below for more details Please note - Selected items are Made To Order...
Firefly Staple Guns & Staples
A range of manual and pneumatic staple guns and staples for use during the installation of the Firefly range of barriers and Firefly Collaroll. Available Staple Guns and Staples: Firefly R31 Manual Staple Gun - R31 8mm and 12mm stainless steel staples are suitable with this product Firefly B16 Manual Staple Gun - B16 8mm, 12mm and 16mm...
Firefly Galvanised Angles
An essential accompaniment for use during the installation of Firefly Fire Barriers. Available in 2 sizes: 25mm x 25mm x 1.2m (Pack of 10) 50mm x 50mm x 1.2m (Pack of 10) Galvanised Steel See the Order References Table below for further details Please refer to the Installation Guide/Installation Drawings for the relevant Firefly...
Nullifire Accessories For Fire Protection
An extensive range of accessories and ancillary products for use with Nullifire (Firetherm) systems, helping the installation and application of firestopping products. Refer below to see the full range. More Information Delivery Info
Quelfire Accessories
Accessories for use with Quelfire fire stopping products and systems. More Information Delivery Info
FSi Green Wipes
Due to supply issues from the manufacturer, this product is temporarily unavailable. Specially formulated to provide a heavy-duty cleaning solution, removing: sealants, paints and coatings, adhesives, oil, foams, grease and other stains from hands, tools and general surfaces. Fully compliant with EU cosmetic legislation, with strong...
Rockwool SP Firestop Fixing Brackets
Used in conjunction with Rockwool SP FireStop Slab to form the Rockwool SP Firestop System. Supplied in three standard sizes; SP/S (small), for cavity widths up to 100mm, SP/L (large) for up to 400mm and SP/XL for up to 600mm Supplied in cardboard boxes of 50 pieces, flat packed and designed to be easily re-profiled by hand on site...
Rockwool Black Aluminium Foil Tape
Designed for taping exposed edges and board joints of the Firepro DuctRock System. Easily applied, quality finish. Supplied in a 75mm x 50m roll, box of 16.
Rockwool Fire Barrier Quick Fit System Ancillaries
Used in conjunction with Rockwool Fire Barriers and comprise of Fire Barrier Support Angles and Clamping Plates. Suitable for void heights of up to 10.5 metres, supported by a stitched wire mesh Patented ‘quick-fit’ system for up to 1 hour fire resistance Support Angles 3m x 34mm x 75mm, 10 lengths per pack Clamping Plates 3m x 40mm,...
FSi Ancillaries
A range of accessiores for use with FSi fire protection products. FSi Angle Fixings - For use with FSi fire protection products FSi Backing Rods - Used to ensure sealants are installed to their required depths FSi Fixings - Fixings for use with FSi fire protection products during application FSi Sealant Applicator Guns - For use with...
Need Help?
Need Help?
Fire Stopping Accessories
Fire stopping accessories play a vital supporting role in the effective implementation of passive fire protection systems, inclusive of Intumescent Paint and Fire Retardant Paints. Whether you're sealing service penetrations, installing cavity barriers, or maintaining the integrity of fire-rated walls, ceilings, and floors, the right accessories ensure a compliant, professional finish that retains its performance throughout the life of the building. At Rawlins Paints, we supply a wide range of reliable fire stopping accessories designed for compatibility with major sealant, compound, and board systems.
These include backing rods for joint depth control, mesh and fixings for sealing systems, sleeves for pipe insulation, and high-performance fasteners for fire-rated boards or wraps. They ensure that products like firestop sealants or ablative coatings perform exactly as tested. Without them, fire protection measures may fall short of test standards, increasing the risk of failure in the event of a fire. For complete compartmentation, these accessories should be installed alongside certified Fire Stopping systems, or used in conjunction with Door Upgrade Kits when enhancing the fire performance of existing solid timber doors.
Suitable for both new build and retrofit projects, our accessories support installations in commercial buildings, high-rise developments, educational institutions, and residential properties. Every component is chosen for its durability, ease of installation, and compatibility with third-party certified fire protection systems, ensuring full compliance with BS 476 and BS EN 1366 standards.