Sub-category links

Filter By

For Use By

For Use By

Brand

Brand

Product Range

Product Range

Colour Family

Colour Family

Suitable For Use On

Suitable For Use On

Base Type

Base Type

Finish

Finish

Application Method

Application Method

Interior / Exterior Use

Interior / Exterior Use

Need Help?

There are 237 products.

Showing 25-36 of 237 item(s)

Active filters

Protecta FR Board

Protecta FR Board, designed to prevent the spread of fire & smoke through openings in fire rated walls & floors with multiple installed building services. Permanently flexible, it will maintain the acoustic design performance in fire rated walls & floors, accommodating movements during fire & smaller movements in the...

Price £21.74 (ex. VAT)
In Stock and Available for Delivery

Quelfire CFC Ceiling Fan Cuffs

Quelfire CFC Ceiling Fan Cuffs prevent the spread of fire through ceilings where plastic ceiling fans penetrate the fire line plasterboard, with built in spring clips holding it to the plasterboard ceiling. Up to 90 minutes Integrity and Insulation.More Information Delivery Info

Price £24.22 (ex. VAT)
In Stock and Available for Delivery

Tenmat FF109 Vent Duct Fire Sleeves Low Profile

CE Marked fire penetration seals designed to firestop PVC ventilation ducts/pipes when installed through fire rated constructions.Fire rated product up to EI 120 minutes Tested for masonry, concrete and plasterboard walls Tested in external wall / SFS constructions Can be installed within Ablative Coated Fire Batts U/U -...

Price £20.27 (ex. VAT)
In Stock and Available for Delivery

SikaSeal-626 Fire Board

A mineral wool based protection board coated with the fire resistant, ablative coating Sikacryl-625 Fire on both sides providing up to 4 hours fire resistance for sealing a wide range of service penetrations.For face fit (pattress-fit) and internal-fit installations Can be used for penetrations up to 1200 x 730 mm Provides acoustic...

Price £622.00 (ex. VAT)
In Stock and Available for Delivery

Sikasil-670 Fire Rated Elastic Joint Sealant

A fire rated, single-component, moisture-curing, low-modulus elastic joint sealant for linear joints in interior and exterior walls and floors. Designed for fire rated movement and connection joints on porous and non-porous substrates, providing up to 4 hours fire resistance according to EN 1366-4.Good adhesion to many different substrates...

Price £92.25 (ex. VAT)
In Stock and Available for Delivery

Sikacryl-621 Fire+ Resistant Interior Sealant

Restores the fire resistance performance of a floor or wall which incorporates penetration services or linear seals. The extremely versatile 1-part product is ready to use and easy to apply, providing acoustic insulation and up to 4 hours fire resistance.Wide service temperature, from −20 °C min. to +70 °C max. Can be combined with many...

Price £32.85 (ex. VAT)
In Stock and Available for Delivery

SikaSeal-623 Fire Resistant Intumescent Sealant

A fire resistant, intumescent graphite based sealant for interior penetration seals, restoring the fire resistance performance of a floor or wall which incorporates combustible services like soil and vent pipes or cables.Designed to provide a high volume expansion and pressure seal during a fire to combustible pipes that pass through floor...

Price £55.65 (ex. VAT)
In Stock and Available for Delivery

Protecta FR ASF 4hr Intumescent Sealant

Designed to prevent the spread of fire, smoke and gases through openings in fire rated walls and floors, specifically linear joints and openings for building service penetrations. The 4-hour rated anti-fire sealant is formulated with fillers that provide noise reduction, creating a robust fire seal by the formation of a durable intumescent...

Price £36.38 (ex. VAT)
In Stock and Available for Delivery

Sika Backer Rod Fire Resistant Joint Sealing Material

A workable, mineral wool-based backing material wrapped with a glass-fibre yarn designed for fire resistant joint sealing in horizontal and vertical building structures, with up to 4 hours fire resistance (EN 1366-4).Easy to apply - Very versatile, can be combined with 3 joint sealants Adapts to irregularities the of joints Used in...

Price £111.28 (ex. VAT)
In Stock and Available for Delivery

SikaSeal-629 Fire Wrap+

A fire resistant pipe wrap on a roll for interior and exterior penetration sealing applications, designed to provide a high volume expansion and pressure seal during a fire to combustible pipes that pass through floor and wall service openings.Now includes pre-sized fire wraps, previously known as SikaSeal 628, from 55mm up to 200mm Pipe...

Price £109.50 (ex. VAT)
In Stock and Available for Delivery

Protecta FR Pipe Collars

Maintain the fire resistance of fire rated walls and floors, where breached by service penetrations, for up to 240 minutes.High end fast expanding patented graphite material Classified for fire sealing all types of constructions - drywalls, masonry & concrete walls, concrete & composite floors, & solid or cross-laminated...

Price £113.76 (ex. VAT)
In Stock and Available for Delivery

Protecta FR Putty

Protecta FR Putty, fire protection putty pads (also known as firestopping gaskets) for reinstating fire ratings in electrical sockets, services and water supply boxes. Supplied as a non-setting putty with a low pressure intumescent for optimal fire protection. The putty is hand workable and easy to apply, re-useable and re-serviceable due to...

Price £35.40 (ex. VAT)
In Stock and Available for Delivery

Sub-category links

Filter By

For Use By

For Use By

Brand

Brand

Product Range

Product Range

Colour Family

Colour Family

Suitable For Use On

Suitable For Use On

Base Type

Base Type

Finish

Finish

Application Method

Application Method

Interior / Exterior Use

Interior / Exterior Use

Need Help?

Need Help?

Effective Fire Stopping Solutions

Apart from our extensive selection of fire retardant paints, Rawlins Paints now stock a range of effective fire stopping protection systems. A fire stop is a physical fire protective measure to complement fire retardant paints and systems. Fire stopping products include special fire curtains, intumescent pipe collars, foams, putty pads and boards to help protect a building and its structure in the event of a fire. The products are used to seal gaps and joints and offer continuous fire-resistance. Gaps and openings can compromise a structure's stability in the event of a fire, and the effectiveness of existing passive fire protective systems. By installing and implementing fire stopping products, they will further assist the impeding spread of fire, flames and smoke in a room, facility or property.

Fire stopping components are generally made of fire retardant and intumescent materials, as well as cementitious mortars, silicone, mineral fibbers, rubber compounds and firestop pillows. Firestops should always be used and maintained in accordance with the listing, approval and compliance of a building’s fire regulations and fire rated certification.

Types of Fire Stops

Rawlins Paints’ fire stopping range contains products from leading passive fire protection manufacturers, namely Nullifire, Thermoguard and Astroflame. Leading fire stop products include:

  • Nullifire’s FB747-50 and -FB747-60 Coated Batts – are lightweight 2 and 4-hour mineral fibre board fire barriers, suitable for service penetrations on metallic and plastic pipes, electrical cable trays and ladders, trunking and other related single and bunched cable passages. These products are commonly used in schools, universities and colleges, commercial, retail and industrial buildings, and health and leisure centres.
  • An intumescent seal offers 30 minutes’ fire resistance around door frame ‘gaps’, sealing the door assemblies and preventing the spread of fire and smoke.
  • Intumescent Pipe Collars from Nullifire include FP150, a galvanised steel shell lined with an intumescent material which act to stop the spread of smoke and fire along pipework in walls and flooring. FP150 Pipe Collars are suitable for use in UPVC, PVC, ABS, PP, PE and Composite pipe penetrations.
  • Fire curtains are available from Nullifire with the FB810 and FB805 products – which are lightweight and flexible barriers to protect and offer resistance against smoke and flames. For maximum effectiveness, these fire curtains are stretched and staple jointed between perimeter fixings, where they can offer up-to 120 minutes of fire resistance. Both the FB810 and FB805 products have been tested in accordance with BS 476-Pt20.

Always adhere to the recommended installation guidelines from the manufacturer to ensure that service gaps and penetrations through walls, floors and ceilings are sealed correctly. Incorrect installation of a fire stop will mean that the full fire-resistant properties and fire resisting time-scales of a product will not be achieved – which could result in serious fire damage to a property and the potential loss of lives. Always check the full installation requirements, understand the mechanical strength and load bearing properties of the fire stopping products used in compartmentalising areas, and take into consideration any vibration or building movement incurred from machinery, or thermal expansion from processing and testing equipment.

For more information, technical support and application guidance for the full Nullifire product range, please contact Rawlins Paints.