The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Restore integrity of fire barriers using compound to seal in penetrating pipes and services, ducting and cable trays, helping prevent the spread of fire and smoke through gaps and cracks.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
Nullifire FR220 Firestopping Compound is a single part gypsum-based compound providing up to 4 hours fire resistance. FR220 Firestopping Compound provides an effective barrier to the spread of smoke and fire resistance tested in accordance with EN 1366-3, ETAG 026 and Classiffcation 13501:2.
Nullifire FR270 High Strength Structural Compound is a single part gypsum-based compound providing up to 4 hours fire resistance. Nullifire FR270 has been fire resistance tested in accordance with EN 1366-3, ETAG 026 and Classification 13501:2.
Firetherm Intucompound, a fire-stopping compound for creating a fire barrier and sealing around static joints, services and ducting in walls and floors. Asbestos, fibre and halogen-free Good workability Exceptional yield Easy to mix, with good flow Use in dry internal conditions Can be made water resistant with a suitable coating at...
Protecta EX Mortar, a highly thermally-insulating fire sealing compound to prevent the spread of fire and smoke through openings in fire rated walls and floors. Use to seal up gaps around services such as cables, bundled cables, cable racks, cable trays, steel, copper, alupex, plastic pipes and air ventilation ducts on concrete, bricks, Leca,...