Bradite HD Floor + Wall is a heavy-duty coating for walls and floors that is well-suited to factory and industrial environments that need ultra protection and an easy-to-clean surface. Also suitable for hygene-sensitive areas such as hospitals and more.
Advantages
Available in more than 350 colours in RAL & BS
Water-based epoxy...
Bradite Rapid is a high performance single-pack moisture cure polyurethane floor coating that is ideal for commercial and industrial environments. Available in a large amount of colours, including RAL shades, the tough and flexible film will provide water and chemical resistance.
Advantages
Available in more than 350 colours in RAL &...
Bedec Multi Surface Paint is a renowned non-yellowing, water-based paint that resists flaking or peeling because of its outstanding flexibility.
Low VOC
Environmentally friendly
Quick drying
Micro-porous
Low odour
No primer/undercoat required
Matt, satin or gloss
Colour choice
PLEASE SEE LONG DESCRIPTION FOR AVAILABLE QUANTITIES...
Sherwin-Williams Cleanser/Thinner No.5 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
1 x 5l available - now 50% off
Rust-Oleum Mathys Fillcoat Fibres is an emergency repair, instantly waterproofing, fibre reinforced coating for flat and pitched roofs to seal leaks and cracks quickly and simply, even in bad weather:
Direct repair of roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc.
Excellent adhesion directly to bituminous...
Rust-Oleum Fillcoat Fibres Repair Kit is a complete kit that seals leaks quickly and simply, even in bad weather!
Thick waterproofing roof repair paint
For use in any weather (even in the wet)
Adheres to wet surfaces
Fibres reinforced
Crack bridging (2mm) - 1300% elastic
Recommended for use on leaking flat or pitched roofs, guttering,...
Because of the high level of fibre re-enforcement small cracks only require one brush coat application to give instant and total water protection, even in areas subject to ponding - requires no primer on sound non-porous surfaces.
Everbuild 905 All Weather Roof Coating is a solvent based, full bodied black brushable compound with added fibres for reinforcement. It is specifically designed for overcoating leaking roofs. Dries to a tough black coating.
Britannia Aquashield Standard is an excellent waterproofer for exterior pitched or flat roofs which gives a coverage rate of approximately 1kg per square meter. Can be used on a wide variety of building types, including factories, brick sheds, prisons, warehouses, as well as guttering.
Roofing Materials
Asbestos cladding
Concrete
Brick...
Britannia Aquashield High Build is an excellent waterproofer for exterior pitched or flat roofs:
Ideal for bitumen, metal, fibreglass, porous and non-porous roofs, including asbestos cladding
Also suitable for concrete, brick, asphalt, iron and steel roofing materials
Excellent waterproofing for roofs
Contains added fibres that...
Britannia Aquashield Smooth is a highly effective waterproof roof coating that is ready to use and works instantly. For use on roofs, this smooth coating can be applied by brush, roller or squeegee:
Suitable for flat roofs, pitched roofs, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, fibreglass, felt and metal...
Remmers MB 2K (formerly Multi-Tight 2K) is a flexible, polymer thick coating which combines the properties of flexible and crack-bridging mineral waterproofing grouts (MWG) and bitumen-thick coatings (PMBC).
Used for rapid waterproofing of building elements as
Can also be used on: containers
Tanks
Reservoirs
Indoor and outdoor use...
Eagle Desmoplus is an additive to be mixed with Desmopol Liquid Polyurethane Membrane to improve application in one layer, eliminating air bubbles, increasing tensile strength, speeding up drying times, and allowing the membrane to be applied in low temperatures or adverse weather.
Open a Credit Agreement Trade Account at Rawlins Paints
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
