The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting.
All packs achieve BS Class 1/0 Surface Spread of Flame protection
For interior use only
The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas such as stairwell, corridors and lift lobbies without the need to strip the current paint.
Advantages
All packs achieve BS Class 1/0 Surface Spread of Flame protection.
For interior use only.
Pack comes complete with the Heat...
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces.
ADVANTAGES
Clear or stained finish
Tough/Durable finish
UV and wear protection (Matt & Satin)
Enhances natural beauty
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:
Up to 90 minutes’ fire resistance
Can be overcoated with compatible decorative topcoat
Water-based
Low odour
Environmentally friendly
Cost effective for large projects
Certificate of supply available on request
Can be applied by brush,...
High performance cleaning and preparation solutions for floors to help ensure maximum performance of floor paints and coatings.
If you read the technical preparation information on practically any of our paints, you will notice the heavy emphasis on pre-application cleaning. Our floor cleaners are an essential step in the process of creating an effective, lasting and decorative floor system.
Never overlook or underestimate the importance of the cleaning process – It can be the difference between a well done or a job done several times!
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system.
Improves the adhesion of coating systems
Neutralizes alkaline salts
Also ideal to remove "white...
Blackfriar Professional Acid Etch is a surface preparation solution for use on concrete and screed floors that removes excess lime dust (laitence) which can interfere with the adhesion of floor coatings.
Product Features
Hydrochloric acid solution.
Etches power floated, very smooth, hard or chemically treated concrete floors to ‘key’ the...
Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties.
Product Features
Degreases and removes oil patches from floors, walls, interior and exterior surfaces prior to acid etching or painting.
Part of the cleaning process.
Essential for a good finish.
Can also be used as a...
Coo-Var Acid Etch is a careful blend of acids and wetting agents in solution, used to clean and ‘etch’ concrete/mortared floors and pools prior to painting. Used to prepare new and smoothed concrete.
Product Details
Removes laitance from concrete/render
Removes salts from concrete/render
Can be used as a degreaser
Removes patches of oil...
Coo-Var Oil Remover is a water based, environmentally friendly cleaner with powerful cleaning and degreasing properties. To be used to degrease and remove oil patches from the surface prior to acid etching or painting. An excellent addition to the cleaning and preparation process.
Product Features
Designed for use on floors, walls and...
SikaBond Wood & Laminate Floor Cleaner is a ready-to-use, spray-applied hard floor cleaner suitable for use on laminate, wood, ceramic, polished stone & vinyl floors, leaving a clean, smear-free surface.
Features and Benefits
Ready to use – no dilution required
No rinsing required – just spray and wipe
Fast acting
Safe and...
Public car parks and driveways inevitably get stained with oil and grease. The unslightly appearance isn`t just grubby, it can also be a health and safety hazard. Using Mona-Clean Oil Dispersant will combat this, effectively removing oil and grease; the end result is an aesthetically-pleasing surface.
Ideas for Uses
Roads and car parks....
Paving can be a breading ground for all sorts of pollution and stains, including soil. The Mona-Clean Paving Cleaner will effectively remove these kinds of nasties, leaving it gleaming and looking great.
Advantages
Easy to apply; no extensive labour needed.
Economical; cost-effective for your wallet.
12-month shelf life; no need to use...
Britannia Fungicidal Wash Solution is a powerful cleaner for external hard surfaces such as tiled roofs, walls, timber decking, block paving and cladding.
Contols and treats fungal and algal growth prior to painting
Water-based
Can be brush or spray applied
Easy, quick and safe to use
Click to jump down to Technical Data
Bradite Acid Etch removes excess lime from power floated or very smooth concrete floors, this Acid Etch from Bradite is an ideal pre-treatment for concrete surfaces. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004.
Advantages
Pre-treatment for concrete surfaces
Removes excess lime from power floated or very smooth...
We at Rawlins Paints have an incredibly comprehensive selection of floor paints. Medium Use, Heavy Use, Epoxy Resin, Anti-Static, Food Safe, Hygienic, the lot.
For the premium paints and systems to be effective, the application process is essential – and these cleaning products are an important part of that.
We have floor paints for heavy traffic, anti-slip, anti-abrasion, chemical resistance, and more, from some of the top manufacturers to make your business or home top of the range in one application.
There are garage paints from Rust-Oleum and Resin Surfaces Limited, anti-static floors from Sika and Remmers, Tarmac paints, Balcony paints, Line Marking paints and over 350 paints for tarmac and concrete removal from renowned names like Schonox.
These Blackfriar, Rust-Oleum, Coo-Var and Sika floor cleaners have been created with these sorts of projects in mind. Simply check the product data sheets to see which is right for you, or give our technical team a call!
