Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Product Usage Type
Product Usage Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Anti-Slip Texture
Anti-Slip Texture
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Fire Rating
Fire Rating
Average Application Thickness
Average Application Thickness
Chemical Resistance
Chemical Resistance
Size
Size
There are 700 products.
Active filters
A durable and easy to install patch kit that can be used to repair worn or damaged areas of high friction surfacing as well as ramps, paths and walkways. Swarco Hitex Swarcoplast Repair Kit (previously known as Hitex PumaGrip Anti-Skid Surfacing Kit) provides an all in one anti skid surfacing solution with no specialist equipment required....
£153.00 (incl. VAT)
£127.50 (ex. VAT)
A clear liquid tack coat primer designed for the adhesion of thermoplastic road markings onto bituminous and non-bituminous substrates. HT Primer is an easy to apply, low viscosity, colourless liquid tack coat primer.Previously known as Hitex HT Adhesion Primer The use of HT Primer with Hitex thermoplastic markings is strongly recommended...
£45.00 (incl. VAT)
£37.50 (ex. VAT)
Pre-formed thermoplastic lines that are fast and convenient to install, with excellent adhesion, durability, flow and colour stability.Previously known as Hitex Hiflex Preformed Suitable for:Reinstatement of markings following utility works Fast and simple installation of new letters / numbers / symbols Small scale lining work such...
£2.81 (incl. VAT)
£2.34 (ex. VAT)
Pre-formed thermoplastic symbols that are fast and convenient to install, with excellent adhesion, durability, flow and colour stability. See ordering references below.Previously known as Hitex Hiflex Preformed Suitable for:Reinstatement of markings following utility works Fast and simple installation of new letters / numbers /...
£19.61 (incl. VAT)
£16.34 (ex. VAT)
Swarco Hitex Preformed Eco (previously known as Hitex Hiflex Preformed) thermoplastic letters and numbers that are fast and convenient to install, with excellent adhesion, durability, flow and colour stability.Suitable for:Reinstatement of markings following utility works Fast and simple installation of new letters / numbers / symbols...
£3.20 (incl. VAT)
£2.67 (ex. VAT)
A clear aerosol spray primer designed for the adhesion of thermoplastic road markings onto bituminous and non-bituminous substrates. Swarco Preformed Primer Spray 200 (previously known as Hitex HiTack Primer) is an easy to apply, colourless aerosol spray tack coat primer.The use of Swarco Preformed Primer Spray 200 with Swarco Hitex...
£12.60 (incl. VAT)
£10.50 (ex. VAT)
Pre-formed thermoplastic road markings that are fast and convenient to install, with excellent adhesion, durability, flow and colour stability.More Information Delivery Info See More Thermoplastic Symbols & Lines
£80.10 (incl. VAT)
£66.75 (ex. VAT)
Washed and dried bags of aggregate, for use with Vuba kits and binder applications.1-3mm and 1-4mm aggregates should only be used as part of the mixed blend of aggregates for the Pedestrian and Vehicle grade resin bound kits 2-4, 2-5, 2-6 and 4-6mm aggregates can be used as part of the Pedestrian and Vehicle blend kits but also...
£11.62 (incl. VAT)
£9.68 (ex. VAT)
A fine aggregate added to each Vuba Vehicle grade resin bound kit to add strength.Used with Vuba Trade Resin Bound Binder Note: orders of 8+ 5KG bags will be delivered on a pallet service, with increased shipping chargesDelivery Info
£2.98 (incl. VAT)
£2.48 (ex. VAT)
An anti slip additive for resin bound systems. Each 20KG bag covers 80m2 of average scatter.Used with Vuba DIY Resin Bound Binder and Vuba Trade Resin Bound Binder Note: orders of 4+ 20KG bags will be delivered on a pallet service, with increased shipping chargesDelivery Info
£37.36 (incl. VAT)
£31.13 (ex. VAT)
It is possible to speed up the curing process of Pre- Catalysed Resin using the Vuba Accelerex additive.A highly catalysed polyurethane resin (Part A) Diluted in resin to enable the addition of small amounts of catalyst without risk of over catalysing the resinMore Information Delivery Info
£12.59 (incl. VAT)
£10.49 (ex. VAT)
Catalyst, chemically known as Dibutyltin Dilaurate Catalyst, is used to speed up the cross-linking process of two-component polyurethane systems. Catalyst favours the reaction between the resin and the hardener, limiting side reactions such as the hardener and water.In pre-catalysed resin kits, the catalysed component is in the Part A of...
£18.00 (incl. VAT)
£15.00 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Suitable For Use On
Suitable For Use On
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Product Usage Type
Product Usage Type
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Anti-Slip Texture
Anti-Slip Texture
Application Method
Application Method
Min. Application Temperature
Min. Application Temperature
Fire Rating
Fire Rating
Average Application Thickness
Average Application Thickness
Chemical Resistance
Chemical Resistance
Size
Size
There are floor coatings and solutions for wood, timber, steel, asphalt, tarmac and concrete, among other surfaces. We understand that you may be under tight budget restrictions, so we have a range of product costings and brands on offer that will meet your floor paint needs without breaking the bank, and without compromising on quality.
Upgrade your floor coating to meet the demands of busy trading areas, factory production plants, chemical handling facilities (including medical practices and dispensaries), home businesses, and film, theatre or production sets, with:
Adhering to strict health and safety measures is key to having a safe floor surface for people to use. Rust-Oleum Epoxyshield Anti-Slip Additive should be added to any of the Epoxyshield Floor Coatings product range. This includes Epoxyshield Ultra, Epoxyshield Maxx and Epoxyshield Garage Floor Coating. Adding the Anti-Slip Additive to any of these floor paints and floor coatings will result in a non-skid surface.
Sika Anti Slip Agent is part of the Sika Balcony System and the Sika ComfortFloor seal coat. Sika floor paints and systems are wide ranging and offer an end-to end product range for floor coatings.
Coo-Var Acrylic Floor Paint benefits from being water-based, low odour and it dries fast upon application. It can be used on concrete, walls, primed metals, asphalt and wood and it can also be used for exterior or interior floor areas that endure foot traffic and some vehicle use. It’s not suitable for heavy duty traffic use. The Coo-Var Floor Paint leaves a semi-gloss finish and is available in a comprehensive colour range.
Coo-Var Acrylic W/B Road Line Paint is a similar acrylic marking paint that can be used inside and outside to make sure areas are marked in the appropriate way.
Coo-Var Profloor 2 Pack Epoxy Floor Paint is specifically developed to be extremely hard wearing. The water-based epoxy floor paint is great for areas that have heavy traffic, such as fork lift trucks and vans.
For specific road use, Ennis-Flint StreetLine One Pack Epoxy coating is fast drying and has tough properties so that it can be used quickly and efficiently when making street lines and road markings. Speed is often of the essence when it comes to these kinds of epoxy flooring needs.
A winter grade epoxy coating can be needed for areas that are open to the elements all year round. Rust-Oleum 9100 Winter Grade Epoxy can be applied in temperatures right down to freezing. This epoxy coating is glossy in finish and can be used for walls and metal, as well as on floors. It is a very hard coating and gives thick coverage without needing two coats.
Sikafloor 161 is an epoxy primer, intermediate layer and levelling mortar. Its low viscosity resin is moisture tolerant and solvent free and can be used as a primer for Sikafloor Systems as well as a binder for Sika levelling screeds and mortars.
Sikafloor 2540W is an epoxy resin based floor coating with excellent chemical and mechanical resistance. It is coloured and can be used as a coating for cement screeds, epoxy mortars and concrete in areas like warehouses, car decks and garages.
Specialist industrial flooring systems are required for factories, warehouses, industrial and commercial premises, where durability and sustainability are paramount. From winter-grade coatings to fast curing paint systems, Rawlins Paints distribute industrial flooring solutions from manufacturers including Rust-Oleum, Blackfriar Professional, Coo-Var, Ennis-Flint, International, Jotun, Mathys, Sherwin Williams, Sika, Teamac, and our own specialist heavy-duty industrial floor paint for concrete.
Although there are many products for heavy traffic floor paints, sometimes you need something a bit lighter. Jotun Jotafloor Rapid Dry is perfect for areas that need a light duty floor coating where a fast turnaround is particularly important.
Specialist floor paints can waterproof and protect renovated and repaired concrete floors, sealing the porous concrete and cement surface from damp and substrate degradation. Application of a concrete sealer prior to a floor paint topcoat will add both durability and sustainability for an extended period. For new internal or external concrete floors where waterproof floor paints are required, please contact us and we'll recommend the best floor system to meet all of your business' requirements.
We understand that large floor areas can be daunting to take on yourself, that’s why we offer comprehensive advice on how to prepare your floor, where to hire the equipment from, the best way to apply your floor coating and if you’re still not sure we’ll even recommend one of our approved applicators to come and do it for you!
Painting floors with high-quality commercial or industrial coatings is much more cost effective and less disruptive to a project than using cheaper substitutes. Larger projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to internal or external flooring will last for an agreed period of time - if correctly maintained.
Using our products, it is possible to decorate and protect concrete, tarmac, asphalt, wood or metal floors, both improving its life expectancy for greater periods of times, and delivering waterproofing and protective properties that can lower the risk of major repair and costly maintenance work. Achieve long-lasting results, with the wide range of floor paints and coatings available at Rawlins Paints today.
We offer systems that are available in virtually any colour and finish - including colour matching existing decorative or company colour schemes - in our light to medium (pedestrianised) right up to heavy use (light to medium vehicular activity) coatings for a wide range of interior or exterior substrates and surface materials.
A trained member of our Technical Support Team will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.
By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.
If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450
