Sherwin-Williams Acrolon C137V2 (formerly Resistex C137V2) is a high performance, fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. Acrolon C137V2 is suitable for use as a final coat(s) in conjunction with epoxy or polyurethane based protective systems for new...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
The ultimate performance shellac-based primer-sealer and stain killer for interior and spot exterior use. Offers unparalleled adhesion to glossy surfaces (including glass) without the need for scuff sanding and blocks stubborn and persistent stains. Available in more than 90 colours from RAL and BS shades (1L, 2.5L, 5L only). • Ultimate...
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...
Prepare, strengthen and dustproof concrete floor surfaces with single pack or two component products from our wide range of floor primers and sealers for interior and exterior projects. Ensure maximum adhesion and optimum coverage with our professional grade concrete floor primers or keep the look of your floor with our clear concrete sealers.
For saving time and costs in stabilising, binding and sealing porous floor substrates, Rawlins Paints have compiled professional-grade floor primers and sealers that are compatible and suitable for commercial and industrial purposes. These include heavy-use concrete floor sealers for factory and warehouse locations, where durability for extended periods of time is essential. In waterproofing, binding and sealing freshly laid, renovated, or repaired concrete flooring, the problems associated with concrete dust are immediately removed, and any potential staining or discolouration from oils, fatty substances, grease, cleaning chemicals or UV exposure can be protected against.
401 Epoxy Floor Primer is a clear primer, especially formulated to provide excellent adhesion to a variety of surfaces prior to the application of our coatings or as a clear sealer in its own right. Used to maximise the performance, adhesion and spreading rates of our systems it can even be applied to damp concrete.This product is temporarily...
Developed for use in applications to oil contaminated floors prior to application of subsequent floor toppings. This product is temporarily out-of-stock. Please contact a member of our Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information or suitable alternatives. See our Customer News...
Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like: Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or...
Rust-Oleum Powerfloat Epoxy Floor Primer Rapid 3366 is a rapid curing 2-component solvent-free epoxy primer designed to improve the adhesion of coatings to difficult substrates such as power-floated concrete. Overcoatable after just 3 hours: apply primer and topcoat in one day Easy all-in-1 packaging For new and aged power floated...
Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces: Primarily intended for roller and brush application Provides a good key for adhesion on porous, mineral substrates Impregnation of porous and brittle floors Can be applied on slightly damp surfaces Also ideal...
Rust-Oleum 5421 Epoxy Floor Primer Rapid is a fast curing primer for use on new or untreated porous mineral surfaces, like concrete to bind weak and friable substrates - can be overcoated with any Rust-Oleum Mathys epoxy floor paint or polyurethane coating. Overcoatable after just 4 hours: apply primer and topcoat in one day Easy all-in-1...
Rust-Oleum 5130 Primer DSP is a super-high solids two pack epoxy resin primer designed for the suppression of vapour pressure effects. Creates a barrier to stop rising moisture and vapour pressure Prevents blistering For use on asphalt and concrete Very low solvent content High build system Coverage Calculator
Blackfriar Professional Epoxy Floor Primer is a low-odour, water-based primer that binds and stabilises friable and porous substrates prior to coating with Blackfriar Professional Epoxy Floor Paints. Product Details Water Based formula ensures low odour. Ideal for binding porous concrete surfaces prior to coating with Blackfriar...
Blackfriar Professional Oil Tolerant Primer is a specialist primer for surfaces with residual oil contamination. Ideal for concrete floors and screeds, promotes adhesion prior to coating with with Blackfriar Professional High Traffic Floor Paint. Product Details Designed for use over cleaned concrete floors and screeds. Tolerates all...
Blackfriar Professional Floor Sealer clear, solvent-based, alkyd sealer. Ideal for binding, stabilising and sealing friable (loose) and porous surfaces prior to finishing with solvent based coatings. Product Details Specifically designed to seal bare and porous concrete substrates. Use prior to coating with Blackfriar Professional...
Blackfriar Professional Water Based Floor Sealer is a clear, water-based, low-odour sealer. Ideal for binding, stabilising and sealing friable (loose) and porous surfaces prior to finishing with water-based coatings. Easy and safe to use. Product Features Specifically designed to seal bare and porous concrete substrates. Low-odour - ideal...
Coo-Var High Performance Primer is a water based two pack epoxy primer to assist adhesion on difficult surfaces. Coo-Var High Performance Primer should be diluted with 10% water for application. To assist the adhesion of PROFLOOR floor paint or other Coo-Var products to difficult floors, tiles, etc or where mechanical abrasion is not practical...
Concrete Floor Sealers
Concrete floors which require high-performance primers to harden and seal the surface and further improve its adhesion, will lengthen the lifespan of topcoat systems – allowing for high-performance protection for longer periods of time in areas where manufacturing plant equipment needs to be installed and maintenance work kept to a minimum with the use of high-end products in the surface preparation and finishing stages.
The products listed in this category will protect untreated masonry and concrete floors in warehouses and more, against:
- Chemical resistance
- Oil spills and fuel leaks
- Abrasive cleaning chemicals
- Light to medium vehicular use
- Pedestrian and footfall traffic
- Concrete dust
- Surface and trapped substrate damp and moisture build-up
- Weather and environmental exposure
- UV discolouration
- See product datasheets for further specifications and related product compatibility for the ultimate concrete floor protection
Please refer to product datasheets for product compatibility with treating cement screeds, brickwork, blockwork, plaster and porous tiles.
Dependant on requirements, water-based and solvent-based floor primers and sealers are available. These differ in VOCs, drying time, recoatable times and approximate coverage rates. Each product varies in graded performance for; new-build projects which require a sealer to reduce the porosity of and work deep beneath new concrete surfaces, dustproofing it in a single clear coating - against older concrete flooring that has recently been repaired and may need a hardened sealer to further reinforce it.
Industrial Concrete Floor Primers
Concrete floors in more aggressive environments, such as factories and warehouses, along with commercial garages and vehicle manufacture plants will require heavy-duty floor primers that can be overcoated with concrete or epoxy floor paints. These will help deliver high-performing protection against impact damage and light, medium and heavy vehicular use. If you prefer to use concrete floor primers and finishing paints by the same manufacturer, but are after a unique or specifically coloured topcoat, or are wanting further information about the compatibility of products by different manufacturers, please contact our technical support team. They can recommend suitable products, and offer application and storage advice on any purchases made.
The specialist team at Rawlins Paints can provide full technical support across all Blackfriar Professional, Coo-Var, Ennis-Flint, Jotun, Rust-Oleum, Sherwin-Williams and Sika floor sealers and primers.
Rawlins Paints’ Floor Sealers and Primers
Rawlins Paints also offer its own range of high-performance epoxy and clear floor sealers and primers for damp-proofing problematic and porous floor substrates, providing improved adhesion to areas requiring a full floor paint system installation, and priming sheet metal flooring.
Our tack-free floor primers and sealers are designed for commercial and industrial projects and builds. Contact us if you'd like more assistance and technical support with our range of concrete floor sealers and primers.
Painting floors with high-quality commercial or industrial coatings is much more cost effective and less disruptive to a project than using cheaper substitutes. Larger projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to internal or external flooring will last for an agreed period of time - if correctly maintained.
Using our products, it is possible to decorate and protect concrete, tarmac, asphalt, wood or metal floors, both improving its life expectancy for greater periods of times, and delivering waterproofing and protective properties that can lower the risk of major repair and costly maintenance work. Achieve long-lasting results, with the wide range of floor paints and coatings available at Rawlins Paints today.
We offer systems that are available in virtually any colour and finish - including colour matching existing decorative or company colour schemes - in our light to medium (pedestrianised) right up to heavy use (light to medium vehicular activity) coatings for a wide range of interior or exterior substrates and surface materials.
A trained member of our Technical Support Team will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.
By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.
If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450