Sub-category links

Filter By

For Use By

For Use By

Suitable For Use On

Suitable For Use On

Brand

Brand

Product Range

Product Range

Colour Family

Colour Family

Usages

Usages

Interior / Exterior Use

Interior / Exterior Use

Product Usage Type

Product Usage Type

Single, Two or Three Pack

Single, Two or Three Pack

Base Type

Base Type

Finish

Finish

Anti-Slip Texture

Anti-Slip Texture

Application Method

Application Method

Min. Application Temperature

Min. Application Temperature

Size

Size

Need Help?

There are 124 products.

Showing 85-96 of 124 item(s)

Active filters

Fosroc Nitodek FS Topcoat

Nitodek FS Topcoat is two component product comprising resin and hardener with good application properties, and therefore will not leave trowel marks.Part of the Nitodek FS system Applied over Nitodek FS Wearcoat Fast setting, with crack bridging properties Seamless, solvent-free, and easy to apply Can also be used with coloured flakes...

Price £483.36 (ex. VAT)
In Stock and Available for Delivery

Fosroc Nitodek FS Wearcoat Filler & Resin

Fosroc Nitodek FS Wearcoat is a three component product comprising resin, filler and hardener. It cures rapidly to give high impact resistance and low-temperature flexibility. Combines MMA Technology with polyurethanes to produce a slip resistant solution that is both hard wearing and flexible suitable for balconies, car park decks, ramps and...

Price £74.98 (ex. VAT)
In Stock and Available for Delivery

Fosroc Nitoprime UR2

Fosroc Nitoprime UR2 is a three component primer for use on concrete floors prior to the application of coving mortar. Suitable for use with Fosroc Nitoflor Coving U.More Information Delivery Info

Price £102.45 (ex. VAT)
In Stock and Available for Delivery

RSL FasTop Multi Primer

FasTop Multi Primer is a water-based polyurethane cement primer designed for use with FasTop screeds and self-levelling systems.Uses current resin, hardener and aggregate to maintain flexibility Delivers the bonding performance and properties that FasTop is known for Can be applied by roller, brush or squeegee depending on the...

Price £39.91 (ex. VAT)
In Stock and Available for Delivery

RSL Resuthane Primer (SofTop LVP)

RSL Resuthane Primer (formerley known as SofTop LVP) is a low viscosity, two component flexible polyurethane resin-based primer.Excellent penetration Seals pore and capillaries Easy to apply Excellent bond to substrateProfessional use only - from the 24th August 2023, adequate training is required before industrial or professional...

Price £191.35 (ex. VAT)
In Stock and Available for Delivery

Tikkurila Hydroblock WB

Tikkurila HydroBlock WB is a water-based impregnating agent (hydrophobic solvent) that creates a water- repellent surface. Alkali-resistant modified silane-siloxane based impregnating agent that penetrates well into the substrate.High “water-pearling” effect Allows water vapour coming from inside the structure to pass through Reduces...

Price £57.61 (ex. VAT)
In Stock and Available for Delivery

Tikkurila Hydroblock SB

Tikkurila HydroBlock SB is a solvent based impregnating agent (hydrophobic solvent). Alkali-resistant modified silane-siloxane based impregnating agent that penetrates well into the substance and reacts chemically with the substrate. Very suitable for “tight” mineral surfaces. It creates a water-repellent surface that prevents capillary...

Price £348.97 (ex. VAT)
In Stock and Available for Delivery

Sika Concrete Primer LO

Sika Concrete Primer LO is a two component, low odour, rapid curing, high solids, hybrid polyurea primer used as a bonding agent on cementitious substrates for consistent and durable adhesion of Sikaroof, Sikalastic and Sikafloor Systems.Low odour application Fast curing - overcoating possible after 30 minutes Significantly reduces the...

Price £108.51 (ex. VAT)
In Stock and Available for Delivery

Swarco Hitex Primer Roll 100

A clear liquid tack coat primer designed for the adhesion of thermoplastic road markings onto bituminous and non-bituminous substrates. HT Primer is an easy to apply, low viscosity, colourless liquid tack coat primer.Previously known as Hitex HT Adhesion Primer The use of HT Primer with Hitex thermoplastic markings is strongly recommended...

Price £37.50 (ex. VAT)
In Stock and Available for Delivery

Swarco Hitex Swarcoplast Primer Roll 120

Primer for Swarco Hitex Puma MMA systems on metal and concrete substrates (e.g. iron, aluminium, stainless steel), with excellent adhesion.Previously known as CM Primer Easy to apply Separate hardener (Hitex BPO Powder Catalyst) required, levels depend on substrate temperatureMore Information Delivery Info Hitex BPO Powder Catalyst...

Price £277.50 (ex. VAT)
In Stock and Available for Delivery

Swarco Hitex Preformed Primer Spray 200

A clear aerosol spray primer designed for the adhesion of thermoplastic road markings onto bituminous and non-bituminous substrates. Swarco Preformed Primer Spray 200 (previously known as Hitex HiTack Primer) is an easy to apply, colourless aerosol spray tack coat primer.The use of Swarco Preformed Primer Spray 200 with Swarco Hitex...

Price £10.50 (ex. VAT)
In Stock and Available for Delivery

Vuba EasiPrime

An acrylic primer used for sealing concrete prior to the application of Resin Bound Surfacing.Used to seal and remove porosity in concrete substrates, to enable a strong chemical bond between a Resin Bound Screed and the Concrete substrate Can be applied to most cementitious substrates, such as concrete and polymer modified screeds Apply...

Price £26.99 (ex. VAT)
In Stock and Available for Delivery

Sub-category links

Filter By

For Use By

For Use By

Suitable For Use On

Suitable For Use On

Brand

Brand

Product Range

Product Range

Colour Family

Colour Family

Usages

Usages

Interior / Exterior Use

Interior / Exterior Use

Product Usage Type

Product Usage Type

Single, Two or Three Pack

Single, Two or Three Pack

Base Type

Base Type

Finish

Finish

Anti-Slip Texture

Anti-Slip Texture

Application Method

Application Method

Min. Application Temperature

Min. Application Temperature

Size

Size

Need Help?

Need Help?

Concrete Floor Sealers

Concrete floors which require high-performance primers to harden and seal the surface and further improve its adhesion, will lengthen the lifespan of topcoat systems – allowing for high-performance protection for longer periods of time in areas where manufacturing plant equipment needs to be installed and maintenance work kept to a minimum with the use of high-end products in the surface preparation and finishing stages.

The products listed in this category will protect untreated masonry and concrete floors in warehouses and more, against:

  • Chemical resistance
  • Oil spills and fuel leaks
  • Abrasive cleaning chemicals
  • Light to medium vehicular use
  • Pedestrian and footfall traffic
  • Concrete dust
  • Surface and trapped substrate damp and moisture build-up
  • Weather and environmental exposure
  • UV discolouration
  • See product datasheets for further specifications and related product compatibility for the ultimate concrete floor protection

Please refer to product datasheets for product compatibility with treating cement screeds, brickwork, blockwork, plaster and porous tiles.

Dependant on requirements, water-based and solvent-based floor primers and sealers are available. These differ in VOCs, drying time, recoatable times and approximate coverage rates. Each product varies in graded performance for; new-build projects which require a sealer to reduce the porosity of and work deep beneath new concrete surfaces, dustproofing it in a single clear coating - against older concrete flooring that has recently been repaired and may need a hardened sealer to further reinforce it.

Industrial Concrete Floor Primers

Concrete floors in more aggressive environments, such as factories and warehouses, along with commercial garages and vehicle manufacture plants will require heavy-duty floor primers that can be overcoated with concrete or epoxy floor paints. These will help deliver high-performing protection against impact damage and light, medium and heavy vehicular use. If you prefer to use concrete floor primers and finishing paints by the same manufacturer, but are after a unique or specifically coloured topcoat, or are wanting further information about the compatibility of products by different manufacturers, please contact our technical support team. They can recommend suitable products, and offer application and storage advice on any purchases made.

The specialist team at Rawlins Paints can provide full technical support across all Blackfriar Professional, Coo-Var, Jotun, Rust-Oleum, Sherwin-Williams and Sika floor sealers and primers.

Rawlins Paints’ Floor Sealers and Primers

Rawlins Paints also offer its own range of high-performance epoxy and clear floor sealers and primers for damp-proofing problematic and porous floor substrates, providing improved adhesion to areas requiring a full floor paint system installation, and priming sheet metal flooring.

Our tack-free floor primers and sealers are designed for commercial and industrial projects and builds. Contact us if you'd like more assistance and technical support with our range of concrete floor sealers and primers.


Book a Site Visit for Large Floor Renovation and Refurbishment Projects

Painting floors with high-quality commercial or industrial coatings is much more cost effective and less disruptive to a project than using cheaper substitutes. Larger projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to internal or external flooring will last for an agreed period of time - if correctly maintained.

Using our products, it is possible to decorate and protect concrete, tarmac, asphalt, wood or metal floors, both improving its life expectancy for greater periods of times, and delivering waterproofing and protective properties that can lower the risk of major repair and costly maintenance work. Achieve long-lasting results, with the wide range of floor paints and coatings available at Rawlins Paints today.

We offer systems that are available in virtually any colour and finish - including colour matching existing decorative or company colour schemes - in our light to medium (pedestrianised) right up to heavy use (light to medium vehicular activity) coatings for a wide range of interior or exterior substrates and surface materials.

A trained member of our Technical Support Team will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.

By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.

If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450