Filter By

CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

Floor Screeds

There are 14 products.

Showing 1-12 of 14 item(s)

Active filters

RSL Resuscreed QS

Resuscreed QS, formerly known as Decora MS, is a decorative epoxy resin floor screed incorporating multi-coloured aggregates, designed to produce a hard wearing, attractive, impervious sealed surface, sealed with clear resins to provide a matt or gloss finish. More aggregate can be bought by adding RSL Resuscreed QS Aggregates only to your...

Price £90.00
In stock

RSL Resuscreed 45

Resuscreed 45 is a heavy duty, epoxy resin floor screed which uses a crystalline silica free aggregate, making it more environmentally friendly. Must seal for an impervious finish. ADVANTAGES Less dust than other screeds Low odour Hard wearing Abrasion and impact resistant Can form coving and falls Can be feather edged Can act as a...

Price £59.30
In stock

RSL Resuscreed 55

Resuscreed 55 is a flecked epoxy resin floor screed for concrete, wood metal and other surfaces with sound and clean substrates. It produces a seamless finish to new and existing floors. ADVANTAGES Hard wearing Can be a repair system Feather edged option Low odour Can be used to form coving and falls Abrasive/Impact resistant See...

Price £68.09
In stock

Remmers Crete HF

Remmers Crete HF Heavy duty polyurethane screed to provide excellent resistance to abrasion, chemical attack and other physical aggression. Ideal for heavy duty installations including; Chemical processing Food processing Brewing Heavy duty traffic and plant vehicles Engineering process areas Image already added

Price £76.95
In stock

Remmers Crete RT

Remmers Crete RT is a 3-component polyurethane screed to provide excellent resistance to abrasion, chemical attack and other physical aggression. Ideal for heavy duty situations including; Chemical processing Food processing Brewing Heavy duty traffic and plant vehicles Engineering process areas Image already added

Price £85.95
In stock

Remmers EP Screed Aggregate

Remmers EP Screed Aggregate is a specially graded quartz blend including gliding agent. Blend with any Remmers clear resin binder at ratio 10:1 for an epoxy screed with excellent workability and a tight closing surface Various Colours available Special colours are available on request but may be subject to minimum quantities, additional...

Price £34.02
In stock

Sikafloor 20 PurCem

Sikafloor 20 PurCem is a multi-component, resin rich, smooth trowel grade, coloured polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure. Find more Sikafloor system products, here. Features and Benefits: Fluid consistency  Excellent chemical resistance Steam...

Price £68.92
In stock

Sikafloor 21 PurCem

Sikafloor 21 PurCem is a multi-component, medium to high strength coloured polyurethane modified, cement and aggregate screed with self-smoothing properties. From the Sikafloor product range, this has an aesthetic, easy to clean, smooth textured aggregate surface providing medium slip resistance. Features and Benefits: Excellent chemical...

Price £93.02
In stock

Sikafloor 29 PurCem

Sikafloor 29 PurCem, from the Sikafloor range, is a multi-component, vertical grade, coloured polyurethane modified, cement and aggregate mortar for detailing work and vertical rendering. It has a finely textured smooth aggregate appearance which offers excellent resistance to abrasion, chemical attack and mechanical damage. Features and...

Price £56.12
In stock

Sikafloor 31 PurCem

Sikafloor 31 PurCem is a solvent free polyurethane coating for use as a stand alone, high build coating or as a seal coat for covings and details performed with Sikafloor 29 PurCem or other products in the Sikafloor PurCem range. Features and Benefits: Excellent chemical resistance Allows use of severe cleaning regimes in the Food and...

Price £69.12
In stock

Sikafloor 22 PurCem

Sikafloor 22 PurCem is a medium to heavy duty, self-levelling polyurethane screed for anti-slip properties. It is a multi-component, coloured polyurethane modified, cement and aggregate screed for obtaining surfaces with a specific roughness and texture. It is broadcast with aggregates to increase surface texture and slip resistance which is...

Price £88.37
In stock

Sikafloor 210 PurCem

Sikafloor 210 PurCem is a multi-component, water-based, coloured polyurethane hybrid screed with self-smoothing properties and a glossy finish. It has an impervious, scratch resistant and smooth surface and is typically installed at 3 - 6mm thickness. Features & Benefits Good chemical resistance Gloss and scratch resistance surface...

Price £110.99
In stock