Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar. Suitable for free flow, cementitious grouting of gap thicknesses 10 to 75 mm. Recommended applications include stanchion baseplates, joints between pre-cast concrete...
Fosroc is a leading international manufacturer and supplier of high performance chemicals for the construction industry, with a particular focus on concrete and cement. Use the desktop sidebar or mobile filter to search for Fosroc products for a wide range of usages, product ranges and more.
Fosroc Paveroc is a high performance reinstatement mortar for the reinstatement or resurfacing of large areas of concrete pavements, ramps and floors to avoid the full depth replacement of bays.May be used internally and externally including areas subject to heavy trafficking Suitable for repair methods 3.1, 3.2, 4.4, 7.1, 7.2 as defined...
Fosroc Galvafroid is a zinc rich coating formulated as an easily applied, cold galvanising protection against corrosion on all ferrous metals with a mid-grey, matt finish.Specifically designed to provide rust inhibiting protection to ferrous metalwork Complies with LU Standard 1-085 ‘Fire Safety Performance of Materials’Please note:...
Fosroc Cebex 100 is an expanding and plasticising powder admixture for site batched cementitious grouts where a reduced water/cement ratio and positive expansion is required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing. Cebex 100 is a suitable pre-stressing grout admixture when complying with BS 8110...
Fosroc Conbextra HF is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete for grouting gap thicknesses from 10mm to 100mm. Recommended applications include large stanchion baseplates, joints between pre-cast...
Fosroc Patchroc GP is a fast setting emergency patching mortar for concrete pavements and floors, and may be used internally and externally including areas subject to heavy trafficking.Ideal for rapid and permanent reinstatement of localised patches in concrete pavements, airport aprons, access ramps and floors. It is particularly useful...
Fosroc Renderoc HB45 is a high performance, fibre reinforced, high build, high strength concrete reinstatement mortar, applicable by hand or wet spray, suitable for repair methods 3.1, 3.3, 4.4, 7.1, 7.2 as defined by BS EN 1504-3.Specifically developed for the repair of columns and beams, but because of its medium fresh wet density, is...
Fosroc Conbextra TS is a high-flow, non-shrink, thick-section, aggregate filled cementitious grout conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use on concrete for free flow grouting for gap thicknesses from 75mm to 500mm. For smaller gaps please see Fosroc Conbextra HF. Recommended applications include large...
Fosroc Renderoc HB is a high build, polymer modified, cementitious repair mortar. Its lightweight nature and high build characteristics makes it ideal for vertical and overhead repair work, and suitable for repair methods 3.1, 3.3, 4.4, 7.1, 7.2 defined by BS EN 1504-3. Ideal for the reinstatement of concrete where low permeability...
Fosroc Renderoc GP is a general purpose medium density concrete reinstatement mortar specifically engineered for vertical repair work and can also be used as a render coat, and suitable for repair methods 3.1, 3.3, 4.4, 7.1, 7.2 as defined by BS EN 1504-3. Ideal for the reinstatement of concrete where low permeability characteristics are...
Fosroc Conbextra EP10 is a two component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
Fosroc Colpor 200PF is a cold applied, high performance, pavement joint sealant conforming to the requirements of BS EN 14188-2:2004 and BS5212 Part1:1990.Suitable for use for the sealing and maintenance of joints in concrete roads, concrete runways and hard standings. Colpor 200PF is particularly suitable for sealing areas where fuel and...
Fosroc is a leading international manufacturer and supplier of high performance chemicals for the construction industry, with a particular focus on concrete and cement.
A British heritage brand, Fosroc began over 80 years ago and has become the go-to name for construction companies, offering a wide range of products and brands including Nitoproof, Nitoseal, Proofex, Supercast, Conplast and Dekguard.
Fosroc's tailored Constructive Solutions are developed combining an extensive range of products with expertise and experience to meet the needs of the construction industry.
Their range of solutions include:
- Concrete Admixtures
- Concrete Repair
- Protective Coatings
- Industrial Flooring
- Joint Sealants
- Grouts and Anchors
- Cement Additives and Grinding Aids
Great construction requires solid foundations. Fosroc have built their business on these rock-solid values.
Fosroc believes safety is paramount with respect to Fosroc's products and interactions with customers.
Fosroc delivers on promises to customers and delights in exceeding their expectations.
Fosroc works closely with customers from many diverse backgrounds and respects different beliefs.
Fosroc believes in open, long-term relationships delivering mutual value
Fosroc are proud of their heritage, and want to deliver future success via customers' successes.