Sub-category links
Filter By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Product Usage Type
Product Usage Type
Usages
Usages
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Application Method
Application Method
Fosroc is a leading international manufacturer and supplier of high performance chemicals for the construction industry, with a particular focus on concrete and cement. Use the desktop sidebar or mobile filter to search for Fosroc products for a wide range of usages, product ranges and more.
There are 10 products.
Active filters
Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar. Suitable for free flow, cementitious grouting of gap thicknesses 10 to 75 mm. Recommended applications include stanchion baseplates, joints between pre-cast concrete...
£15.84 (incl. VAT)
£13.20 (ex. VAT)
Fosroc Conbextra HF is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete for grouting gap thicknesses from 10mm to 100mm. Recommended applications include large stanchion baseplates, joints between pre-cast...
£27.97 (incl. VAT)
£23.31 (ex. VAT)
Fosroc Conbextra TS is a high-flow, non-shrink, thick-section, aggregate filled cementitious grout conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use on concrete for free flow grouting for gap thicknesses from 75mm to 500mm. For smaller gaps please see Fosroc Conbextra HF. Recommended applications include large...
£42.47 (incl. VAT)
£35.39 (ex. VAT)
Fosroc Conbextra EP10 is a two component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
£115.24 (incl. VAT)
£96.03 (ex. VAT)
Fosroc Conbextra BM (Bedding Mortar) is a single component cementitious high strength bedding mortar. Suitable for use in the structural bedding in of precast modular concrete units. Conbextra Bedding Mortar is a blend of Portland cements, chemical additives and graded aggregates. More Information Delivery Info
£42.49 (incl. VAT)
£35.41 (ex. VAT)
Fosroc Conbextra BB is a non-shrink cementitious bridge bearing grout. Formulated specifically for grouting of bridge bearings and parapet post baseplates. Also used for grouting beneath flanged lighting columns. The dry powder is a blend of Portland cements, graded silica sands and additives to which only a controlled amount of clean water...
£64.10 (incl. VAT)
£53.42 (ex. VAT)
Fosroc Conbextra EPR is a three component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
£272.57 (incl. VAT)
£227.14 (ex. VAT)
Fosroc Conbextra BB92 is an ultra-high performance grout designed for structural grouted connections for onshore wind turbine foundations and non-structural offshore foundation connections, as well as for segmental concrete wind towers. Suitable for use for grouting beneath bridge bearings, parapet posts, flanged lighting columns, windfarm...
£41.78 (incl. VAT)
£34.82 (ex. VAT)
Fosroc Conbextra PM is a single component thixotropic cementitious pumping and pointing mortar. Suitable for use for the structural grouting of gaps in precast concrete units and high strength pointing. Fosroc Conbextra PM requires only the addition of clean water to produce an easily pumped mortar. More Information Delivery Info
£42.49 (incl. VAT)
£35.41 (ex. VAT)
Fosroc Conbextra UW is a non-shrink free flow or pumped cementitious grout for underwater installation conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use underwater or in tidal zones where “wash out” would be a problem with conventional grouts. Recommended applications include stanchion baseplates, bridge columns, quay...
£57.24 (incl. VAT)
£47.70 (ex. VAT)
Sub-category links
Filter By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Product Usage Type
Product Usage Type
Usages
Usages
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Application Method
Application Method
Fosroc is a leading international manufacturer and supplier of high performance chemicals for the construction industry, with a particular focus on concrete and cement.
A British heritage brand, Fosroc began over 80 years ago and has become the go-to name for construction companies, offering a wide range of products and brands including Nitoproof, Nitoseal, Proofex, Supercast, Conplast and Dekguard.
Fosroc's tailored Constructive Solutions are developed combining an extensive range of products with expertise and experience to meet the needs of the construction industry.
Their range of solutions include:
Please contact Rawlins Paints Technical Department for information regarding the full range of Fosroc products on 0113 2455450 (option 2) or send a message to [email protected].
Great construction requires solid foundations. Fosroc have built their business on these rock-solid values.
Safety
Fosroc believes safety is paramount with respect to Fosroc's products and interactions with customers.
Performance
Fosroc delivers on promises to customers and delights in exceeding their expectations.
Respect
Fosroc works closely with customers from many diverse backgrounds and respects different beliefs.
Mutual Trust
Fosroc believes in open, long-term relationships delivering mutual value
Passion
Fosroc are proud of their heritage, and want to deliver future success via customers' successes.
