Sub-category links
Fosroc is a leading international manufacturer and supplier of high performance chemicals for the construction industry, with a particular focus on concrete and cement.
A British heritage brand, Fosroc began over 80 years ago and has become the go-to name for construction companies, offering a wide range of products and brands including Nitoproof, Nitoseal, Proofex, Supercast, Conplast and Dekguard.
Fosroc's tailored Constructive Solutions are developed combining an extensive range of products with expertise and experience to meet the needs of the construction industry.
Their range of solutions include:
Please contact Rawlins Paints Technical Department for information regarding the full range of Fosroc products on 0113 2455450 (option 2) or send a message to [email protected].
There are 170 products.
Fosroc Conbextra EP10 is a two component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
£115.24 (incl. VAT)
£96.03 (ex. VAT)
Fosroc Conbextra EPR is a three component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
£272.57 (incl. VAT)
£227.14 (ex. VAT)
Fosroc Conbextra GP is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar. Suitable for free flow, cementitious grouting of gap thicknesses 10 to 75 mm. Recommended applications include stanchion baseplates, joints between pre-cast concrete...
£15.84 (incl. VAT)
£13.20 (ex. VAT)
Fosroc Conbextra HF is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete for grouting gap thicknesses from 10mm to 100mm. Recommended applications include large stanchion baseplates, joints between pre-cast...
£27.97 (incl. VAT)
£23.31 (ex. VAT)
Fosroc Conbextra PM is a single component thixotropic cementitious pumping and pointing mortar. Suitable for use for the structural grouting of gaps in precast concrete units and high strength pointing. Fosroc Conbextra PM requires only the addition of clean water to produce an easily pumped mortar. More Information Delivery Info
£42.49 (incl. VAT)
£35.41 (ex. VAT)
Fosroc Conbextra TS is a high-flow, non-shrink, thick-section, aggregate filled cementitious grout conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use on concrete for free flow grouting for gap thicknesses from 75mm to 500mm. For smaller gaps please see Fosroc Conbextra HF. Recommended applications include large...
£42.47 (incl. VAT)
£35.39 (ex. VAT)
Fosroc Conbextra UW is a non-shrink free flow or pumped cementitious grout for underwater installation conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use underwater or in tidal zones where “wash out” would be a problem with conventional grouts. Recommended applications include stanchion baseplates, bridge columns, quay...
£57.24 (incl. VAT)
£47.70 (ex. VAT)
Fosroc Concure WB is a water based concrete curing compound based on a low viscosity wax emulsion. For use as a spray applied membrane to retain moisture in concrete for effective curing. Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and...
£179.14 (incl. VAT)
£149.28 (ex. VAT)
Fosroc Conplast UW is an underwater concrete admixture used to minimise washout of concrete placed underwater. When added to concrete, Conplast UW produces a gel in the water phase which surrounds the cement particles and other fine components of the concrete mix and protects them from excessive washout both during placement and once the...
£235.42 (incl. VAT)
£196.18 (ex. VAT)
Fosroc Cure B is a spray on temporary curing membrane to retain moisture in freshly placed concrete.Ideal for use as a spray applied membrane to retain moisture in concrete for effective curing Suitable for all general concreting applications and of particular benefit for large area concrete surfaces, such as airport runways, roads and...
£141.31 (incl. VAT)
£117.76 (ex. VAT)
Fosroc Dekguard A Plus is an environmentally friendly high performance water-based acrylic protective and decorative coating for concrete and masonry conforming to the requirements of BS EN 1504-2. Suitable for use to protect atmospherically exposed reinforced concrete structures, cementitious substrates and masonry from carbonation, chloride...
£221.34 (incl. VAT)
£184.45 (ex. VAT)
Fosroc Dekguard CP is a weather resistant, clear, water based impregnation and glaze for use on concrete. It is designed to protect reinforced concrete from chloride ions, oxygen, carbon dioxide (CO²) and other aggressive chemicals. Dekguard CP has a wide range of uses, e.g. multi-storey car parks, office buildings, industrial buildings,...
£318.60 (incl. VAT)
£265.50 (ex. VAT)
Great construction requires solid foundations. Fosroc have built their business on these rock-solid values.
Safety
Fosroc believes safety is paramount with respect to Fosroc's products and interactions with customers.
Performance
Fosroc delivers on promises to customers and delights in exceeding their expectations.
Respect
Fosroc works closely with customers from many diverse backgrounds and respects different beliefs.
Mutual Trust
Fosroc believes in open, long-term relationships delivering mutual value
Passion
Fosroc are proud of their heritage, and want to deliver future success via customers' successes.
