Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces.
See further below for representations of available translucent wood stains - these are shown in the colour picker as solid colours
Certificate Application
Thermoguard Wallcoat 30 & 60 Minute System for Plasterboard is a coloured intumescent paint system for interior plasterboard and cement board ceiling and wall surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Wallcoat)...
Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:
Up to 120 minutes’ fire resistance
Can be overcoated with compatible decorative topcoat
Water-based
Low odour
Environmentally friendly
Cost effective for large projects
Certificate of supply available on request
Can be applied by brush,...
High performance cleaners for general cleaning and preparation of surfaces before painting. A range of cleaners for many different surfaces to remove dirt, grime, fungi, moss and more. Every surface needs cleaning properly before painting, choosing the right cleaner for the job can save a lot of time, money and hard work. Not only can they make the job easier for the user but they can ensure the adhesion of the paint is performing to it's best which will help to reduce any flaking, peeling or delamination that could have occurred.
Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates.
Non-flammable, virtually odour-free cleaning/degreasing solution.
Can be used as an additive for high pressure and steam cleaning
Applied by synthetic sponge,...
Rust-Oleum Mathys AMW is a ready mixed fungicidal wash; a solution of an approved biocide in water (HSE Approval No 4246).
Removes and prevents growth from fungi and algae
HSE approved biocide
Ready-mix product
Does not harm glass or PVC and not hazardous for the applicator
For bituminous substrates, concrete, masonry, plaster and...
Rust-Oleum FK111 Cleaning Solution is a concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution for vertical substrates like walls.
High-viscosity formulation is ideal for use on walls, does not run off the wall
Removes grease, oil, proteins, dirt and many other contaminants
Usable as additive for high...
GacoFlex GacoWash is a concentrated cleaning solution for roof membranes and existing waterproof systems. It is specially formulated to remove tough dirt, pollen, mildew and fungus. Ideal for use as a cleaning solution for aged asphalt, aged EPDM and TPO/CPA, built-up, cap sheet, composite, concrete, fiberglass, metal, modified bitumen and...
Sika Remover 208 can be used for removing traces of Sikaflex products from unwanted places and tools and it is also ideal to clean painted surfaces prior to bonding.
Uses:
Removes uncured excess material of Sikaflex adhesive or sealant from application tools or from soiled surfaces
Pre-cleaning of strongly contaminated non-porous...
Sika Hand Cleanser is for the removal of uncured Sikaflex and SikaBond products from hands. The special formula works quickly to easily remove unwanted product that has got onto hands during application.
More Information
**Available for delivery - see Delivery Options below**
Sika Hand Wipes are specially designed to make the removal of uncured Sikaflex and SikaBond products from hands easy. They can also be used for removing uncured materials from tools and other surfaces, in this handy wipe form they allow for mess free cleaning and easy disposal.
Each tub holds 100 wipes.
More Information
**Available for...
Sika Aktivator 205 (previously know as Sikka Cleaner 205), an alcoholic solution containing a bond activating substance for cleaning and activating bond faces, prior to bonding and sealing with Sikaflex products.
Features and Benefits
Pre-treatment agent for non porous substrates
Metals, plastics, glazed ceramics, painted surfaces...
Zinsser Universal Degreaser & Cleaner is a water based detergent that is colour fast, fabric safe and removes tough stains quickly and effectively from many surfaces. A concentrated cleaner, degreaser and stain remover effective against grease and oil and is ideal for cleaning before painting.
Concentrated cleaner, degreaser and stain...
Zinsser Mould Killer and Remover is for use against fungi, moulds and algae on internal surfaces such as tiles, wood, plaster, and wallpaper. Zinsser Mould Killer and Remover is water based and ready for use.
Kills and removes fungi, mould and algae growth
Powerful fast acting formula
Suitable for all interior surfaces
Removes mould...
Zinsser DIF Concentrate Wallpaper Stripper is an economical wallpaper stripper with effective wetting agents & enzymes that penetrate wallpaper and quickly break down old paste. 1 litre of Zinsser DIF Concentrate Wallpaper Stripper is diluted with 12 litres of warm water which will strip up to 3 standard rooms of 3.5m x 3.5m....
Krud Kutter Original Cleaner/Degreaser is a concentrated cleaner, degreaser and stain remover that quickly and easily removes tough stains from many different surfaces. Water-based, it contains no petroleum solvents, bleach or ammonia. It cleans what ordinary cleaners simply can`t and is particularly good as a tile and grout cleaner.
More...
Prior to using anti-condensation or anti-mould paints, some surfaces will require a strong and heavy duty mould remover product to clear damp and condensation formed fungal growth. Mould and fungi is much more noticeable on lightly coloured walls, which are typical in bathrooms, washrooms, shower facilities, laundry rooms and kitchens. Even widely spread mould can be removed easily with the right product. Light bleaches and washing liquids are not designed for stagnant, smelly and unhygienic mould as much as products such as Rust-Oleum Mathys' AMW Fungicidal Wash, Sika Mould Buster, Thermilate PRO Fungicidal Wash or Zinsser Mould Killer and Remover.
Mould and fungi growth is typically associated with walls, but can commonly affect floors, most noticeably in basements and cellars - such as wine cellars in restaurants. Using the correct product can also prevent further mould and algae growth in hidden or partly covered areas.
A number of the anti-fungal washes available at Rawlins Paints can be used on internal and external areas - such as around guttering, roofing and cladding. These anti-fungal washes and mould remover products are available as liquids to add to water, or direct to surfaces, and via spray application - as seen with Zinsser and Krud Kutter's ranges.
