The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
General Surface Cleaners
High performance cleaners for general cleaning and preparation of surfaces before painting. A range of cleaners for many different surfaces to remove dirt, grime, fungi, moss and more. Every surface needs cleaning properly before painting, choosing the right cleaner for the job can save a lot of time, money and hard work. Not only can they make the job easier for the user but they can ensure the adhesion of the paint is performing to it's best which will help to reduce any flaking, peeling or delamination that could have occurred.
- Brand: Sherwin-Williams
Dumond Smart Strip PRO Professional Strength Paint Remover effectively removes 2-component, high-performance coatings and lead paints, including multiple coats of oil-based, water-based, acrylics, varnishes, epoxies, urethanes, elastomeric and lead paint from most interior or exterior surfaces (wood, brick, stone, concrete, plaster, metal,...
Mould Removers and Anti-Fungal Washes
Prior to using anti-condensation or anti-mould paints, some surfaces will require a strong and heavy duty mould remover product to clear damp and condensation formed fungal growth. Mould and fungi is much more noticeable on lightly coloured walls, which are typical in bathrooms, washrooms, shower facilities, laundry rooms and kitchens. Even widely spread mould can be removed easily with the right product. Light bleaches and washing liquids are not designed for stagnant, smelly and unhygienic mould as much as products such as Rust-Oleum Mathys' AMW Fungicidal Wash, Sika Mould Buster, Thermilate PRO Fungicidal Wash or Zinsser Mould Killer and Remover.
Mould and fungi growth is typically associated with walls, but can commonly affect floors, most noticeably in basements and cellars - such as wine cellars in restaurants. Using the correct product can also prevent further mould and algae growth in hidden or partly covered areas.
A number of the anti-fungal washes available at Rawlins Paints can be used on internal and external areas - such as around guttering, roofing and cladding. These anti-fungal washes and mould remover products are available as liquids to add to water, or direct to surfaces, and via spray application - as seen with Zinsser and Krud Kutter's ranges.