The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Extra fire protection for fire-rated glass in fire doors, steel doors, partitions and windows, preventing flames from attacking beading and compromising fire barriers.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
Intumescent Glazing Channels for high noise & vibration areas, absorbing sounds and movement more efficiently. Intumescent material expands in fire to seal up gaps and prevent spread of smoke and fire. Refer to sizes below Held in place with hardwood or softwood beading 10mm channel height up to 30 minutes fire rating 15mm channel...
Non Intumescent Glazing Tape for fire-rated glass in steel doors, partitions and windows, where intumescent properties aren't required. Ideal for high temperature insulation of various vehicle parts, such as silencers, catalytic exhausts, heat shields and gaskets. 15m rolls Easily installed with self-adhesive backing