Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...
Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...
Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...
Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...
Graffiti has been around since Roman times, and it shows no signs of going anywhere any time soon! At Rawlins Paints, we understand the challenges presented by removing graffiti from difficult surfaces, such as bare brick, previously painted or protected surfaces and decorated walls.
Removing graffiti isn’t always as simple as it looks, particularly if you’re concerned about damaging the surface beneath. We offer a range of cleaning solutions to remove graffiti quickly and safely, for use on interior and exterior surfaces.
- Brand: Hydron Protective Coatings
The AG2 Graffiti Remover is a specially-formulated graffiti remover for use on sensitive surfaces, such as plastic, signs and polycarbonate glazing. Advantages Removes permanent marker pen, crayon and lipstick Low odour 10x 500ml sprays or 5L drum 12-month shelf-life
The AG3 Graffiti Remover is an ideal graffiti remover for non-porous substrates such as gloss paint, tile, glass and metalwork. Advantages Ideal for non-porous surfaces Available in 10x 500ml sprays or 5L drum 12-month shelf life
The AG4 Graffiti Remover is a blend of solvents and biodegradable detergents developed to remove graffiti from more porous or extensively vandalised surfaces. Advantages Ideal for brickwork and concrete Restricts unpleasant odours Biodegradable 12-month shelf life
SL1 Shadow Lifter is the ideal solution for those looking to get rid of stubborn graffiti shadows. For example, when applying graffiti removal from the brickwork, a shadow of the graffiti may remain. The SL1 Shadow Lifter has been formulated to cure this problem. Advantages Removes graffiti shadow Removes general soiling Perfect for...
Part A Stain Remover is ideal for non-aerosol graffiti on surfaces such as signs. Councils, schools and nightclubs will find this graffiti remover very useful, to remove the stains that are an industry hazard. Advantages Removes non-aerosol graffiti Low odour Internal/external use
Wipeaway Part B Wipes (HPC 223B) is a graffiti remover that removes graffiti from non-porous surfaces such as metalwork, gloss paint and tiles. Capable of removing an array of graffiti types, such as: Removes Aerosol graffiti. Marker pen. Crayon. Lipstick.
We provide products to remove thick paint, spray paint, adhesives, marker pen, aerosol and more, and from every kind of surface you can think of, including porous and stubborn surfaces. We also provide graffiti removal products for surfaces that have a graffiti protection coating and need a compatible cleaner.
Graffiti Removal Gel
For walls and surfaces that have already been protected with Pegagraff Hydro, Mathys Pegagraff-Hydro Cleaner is a gel that can be used to remove graffiti. It can also be used to strip graffiti from non-painted substrates like concrete, nonporous material and metals.
Like a lot of graffiti removal products, Pegagraff-Hydro Cleaner shouldn’t be used on surfaces that haven’t already been protected by an anti-graffiti coating, or on porous materals, such as brick and plaster.
For the right surfaces, Pegragraff is quick and easy to use – all you need to do is make sure the area is well ventilated, apply the cleaner and let it stand for three minutes before removing with a soft or hard brush, depending on the condition of the surface.
Alternatively, Blackfriar Professional is a graffiti removal gel that works on all kinds of different graffiti, whether it’s written with aerosol spray paint, permanent marker or normal paint. It works specifically on external surfaces, including brick walls, concrete and natural stone.
Multi-Surface Graffiti Remover
Our Graffiti Remover (1401) is super easy to use and can remove graffiti from lots of different surfaces quickly and safely. Use on bare or previously painted surfaces, including brick, render and wood. We also advise coating with our Clear Graffiti Coating (1301) after you’ve cleaned the graffiti off, to prevent it happening again.
Blackfriar Paint and Varnish remover is another easy to use graffiti removal product that doesn’t need washing off after use, unless you want to repaint the surface with emulsion. It works fast and easily removes layers of paint without leaving discolouration behind and is perfect for removing graffiti from metal, wood and glass, making it a really diverse and useful product.
Green Paint Stripper
To strip old paint, including graffiti, use Rust-Oleum Nr 1 Green Paint Stripper. Developed to remove all types of paint, including emulsion paint and varnish, it works on lots of surfaces. It’s environmentally friendly and is formulated as a graffiti removal foam so it can reach into lots of nooks and crevices. It’s available in different aerosol sizes so it’s easy to spray on to the surface to quickly, safely and neatly remove graffiti.
Stubborn Graffiti Removal and Rust-Oleum Graffiti Removal
We stock various products from Rust-Oleum to deal with graffiti, including GraffitiShield Cleaner. This super-fast acting cleaner can be used in enclosed spaces and simply needs to be sponged off after it’s penetrated the surface of the wall. It should only be used on surfaces that have been previously treated with Rust-Oleum anti-graffiti products, which include GraffitiShield Hydro, GraffitiShield Polycoat and GraffitiShield Nano.
When looking for graffiti removal products, you need to take into account the type of surface, the type of graffiti and the ventilation levels that you’ll be working within. Some graffiti removers can also be used as more general paint and varnish removers to help maintain and tidy up various internal and external surfaces.