- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Grouts
Specialist grouts are engineered for strength, precision, and reliability in structural works. They’re used to fill voids under base plates, anchor dowel bars, and support heavy machinery where high loads and fine tolerances demand consistent performance. With non-shrink, rapid-set, and high-flow options, they offer dependable results in civil, industrial, and commercial environments.
Fosroc Conbextra GP
Fosroc Conbextra GP is a non-shrink, flowable cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6: Anchoring of reinforcing steel bar. Suitable for free flow, cementitious grouting of gap thicknesses 10 to 75 mm. Recommended applications include stanchion baseplates, joints between pre-cast concrete...
Fosroc Conbextra HF
Fosroc Conbextra HF is a high-flow, non-shrink, cementitious grout conforming to the requirements of BS EN 1504-3 Class R4 and BS EN 1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete for grouting gap thicknesses from 10mm to 100mm. Recommended applications include large stanchion baseplates, joints between pre-cast...
SikaGrout 111 GP
SikaGrout 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout which meets the requirements of BS EN 1504-6. Used for the anchoring of reinforcing bars, general purpose grouting, under stanchion plates, filling cavities, voids, gaps and recesses, sealing around penetrations, machine and base plates, post...
Sika L2 High Flow
Sika L2 High Flow is a one part, high flow, rapid strength cementitious grout which meets the requirements of BS EN 1504-6. Used for precision, high performance, grouting underneath machine bases, structural steelwork, etc. For grouting precast concrete units and anchor bars, repairing concrete structures, filling voids, for grouting...
Sika Parex CS Grout
Parex CS Grout is a Portland cement based product giving high strength, good flow and non-shrink properties. Placed grout gives structural support and good vibration resistance. Chloride free Resistance to sea water and mild alkali attack Placement thickness may be in the nominal range of 10mm to 100mm. For thicker sections 6mm...
Fosroc Conbextra UW
Fosroc Conbextra UW is a non-shrink free flow or pumped cementitious grout for underwater installation conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use underwater or in tidal zones where “wash out” would be a problem with conventional grouts. Recommended applications include stanchion baseplates, bridge columns, quay...
SikaGrout 3200
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. SikaGrout 3200 is a fast hardening, high early strength, high final strength, 1-component, shrinkage compensated, free flowing cementitious grout...
Fosroc Conbextra EP10
Fosroc Conbextra EP10 is a two component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
Sika Parex 100 Newton Grout
Parex 100 Newton Grout is a one-part, ultra high strength grout. The mix design includes special shrinkage compensating components, which give a nonshrink grout in both the plastic and hardened states. Powerful plasticising agents produce a highly flowing grout at low water content. Pre-packaged, only requiring the addition of water Can be...
Fosroc Conbextra BB
Fosroc Conbextra BB is a non-shrink cementitious bridge bearing grout. Formulated specifically for grouting of bridge bearings and parapet post baseplates. Also used for grouting beneath flanged lighting columns. The dry powder is a blend of Portland cements, graded silica sands and additives to which only a controlled amount of clean water...
Fosroc Conbextra TS
Fosroc Conbextra TS is a high-flow, non-shrink, thick-section, aggregate filled cementitious grout conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use on concrete for free flow grouting for gap thicknesses from 75mm to 500mm. For smaller gaps please see Fosroc Conbextra HF. Recommended applications include large...
Fosroc Conbextra EPR
Fosroc Conbextra EPR is a three component epoxy resin free-flow grout conforming to the requirements of BS EN1504-3 Class R4 and BS EN1504-6 - Anchoring of reinforcing steel bar. Suitable for use on concrete and steel for grouting under baseplates, crane rails, turbines where heavy dynamic loads are encountered and areas where chemical...
Fosroc Lokfix S25
Fosroc Lokfix S25 is a two component polyester resin anchoring grout meeting the requirements of BS EN 1504-6 - Anchoring of reinforced steel bars. Suitable for use for anchoring of steel bars into concrete, brickwork, masonry and rock. Recommended applications include installation of starter bars, base plate bolts, MOT Bolts, installation...
Sikadur 42 HE
Sikadur 42 HE is a three-component, high performance, high precision, moisture tolerant, epoxy grouting system. For use at temperatures between +5°C and +30ºC. Please Note: The 12kg pack size in this product is subject to a minimum order quantity of 33 x 12kg and a 3 week lead time. Features and Benefits High early strength and fast...
Fosroc Conbextra BB92
Fosroc Conbextra BB92 is an ultra-high performance grout designed for structural grouted connections for onshore wind turbine foundations and non-structural offshore foundation connections, as well as for segmental concrete wind towers. Suitable for use for grouting beneath bridge bearings, parapet posts, flanged lighting columns, windfarm...
Sika Parex 100 Newton Grout AW
Parex 100 Newton Grout AW is an ultra high strength grout specially formulated using a Portland cement powder mix. The mix design consists of a blend of fine and ultra-fine cements, high quality graded sands and a set of synergistic admixtures. The product is supplied either pre-packaged ready for onsite mixing or loose bulk quantities and...
Sika Parex Speedsure S Grout
1-component, rapid setting, high early strength, cementitious grout. Ideal for limited possession work on road or rail works, allowing rapid return to use for areas such as car parks, forecourts, loading bays, grouting base plates, etc. Also suitable for factory floor repairs, filling ruts or cracks, grouting in marine/tidal zones, and for...
Mapei Mapefill GP
General purpose non-shrink grout, recommended for grouting voids in structural elements such as filling gaps in precast elements, and grouting base plates and bridge bearings. Anchoring of mechanical equipment and of steel bars Filling of rigid joints between elements in concrete and precast concrete structures Execution of underpinning...
Sika Parex Tecgrip S
A cementitious anchor grout requiring only the addition of clean water. The product is based on a Portland cement mix with high quality graded silica sands plus a synergistic blend of admixtures. Its uses include: Ties into brick arches Overhead rail tracks Starter bars and dowels Brick ties and stitching Anchoring More Information...
Sika Parex Epoxy E200 Grout
Sika Parex Epoxy E200 Grout is an epoxy resin based anchor grout with high flow properties capable of placing in annular gaps 2 mm to 12 mm. Adhesion gained from the epoxy resin enables fixings into smooth walled holes such as diamond cored bores. Three part formulation gives good chemical resistance to most chemicals Stable to seawater,...
Sika Parex Tecgrip V
2-component, polyester based, anchor grout for bolt to hole diametric differences up to 25mm. For temperatures 5℃ to 25℃ (Winter) and 10℃ to 35℃ (Summer)* Used for the fixing of steel bolts and bars into pre-drilled holes within concrete, rock, brickwork, stonework, masonry, etc. 7-day compressive strength: ~95MPa *Please note: Summer...
Sika Parex E33 Epoxy Grout
E33 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in gaps down to 10mm. The epoxy resin formulation enables E33 Epoxy Grout to be used in the most demanding situations giving exceptional mechanical strength. The volume stable mix design ensures complete fill of the grouted area and contact with the work...
Sika Parex Epoxy Injection Grout
Parex Epoxy Injection Grout consists of a base component containing solvent free epoxide resin plus a low viscosity liquid hardener. Epoxy Injection Grout may be placed by free flow under gravity or may be injected using a suitable hand or mechanical pump. Grouting of gap dimensions 0.1mm to 10mm may be easily achieved. Rapid strength gain...
Sika Parex Cable Grout
Parex Cable Grout is a one-part, cementitious, fluid, flowing grout which will penetrate and fill fine voids within and around the cables, then harden without shrinkage to give a high strength product. Quick and easy mixing with water producing a flowing mix which promotes penetration into confined spaces Shrinkage compensated and contains...
Sika Parex E20 Epoxy Grout
Parex E20 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in nominally parallel gaps down to 8mm. Tapered gaps may be filled down to a featheredge. The epoxy resin formulation enables E20 Epoxy Grout to be used in the most demanding situations giving exceptional mechanical strength. The volume stable mix...
Instarmac UltraCrete HF High Flow Precision Grout
Ideal as a bridge bearing grout as well as for the securing of stanchion base plates, machine beds and parapet legs. High Flow Can be pumped or poured Will no corrode or stain Non-shrink 70N/mm² compressive strength Complies with the specification for Highway Works Clause 2601 More Information Delivery Info
Sika Parex E140 Epoxy Grout
Parex E140 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in gaps between 70mm to 140mm. The epoxy resin formulation enables the product to be used in the most demanding situations giving exceptional mechanical strength. The volume stable mix design ensures complete fill of the grouted area and contact...
Sika Parex E70 Epoxy Grout
Parex E70 Epoxy Grout is an epoxy resin based grout with high flow properties capable of placing in nominally gaps between 35mm to 75mm. Tapered gaps may be filled down to a featheredge. The epoxy resin formulation enables E70 Epoxy Grout to be used in the most demanding situations giving exceptional mechanical strength. The volume stable mix...
Mapei Planigrout 310
Three-component, high-strength, rapid-hardening epoxy grout specifically developed for anchoring, repairing and grouting structures, including those subjected to dynamic loads and vibrations. Application examples include: Anchoring and grouting support bases for presses, compressors and heavy industrial machinery in general, including those...
Mapei Planigrout 350
Mapei Planigrout 350 is a high-performance epoxy grout that can be placed in deep-pour applications and where high compressive and dynamic strengths are required. Application examples include: Grouting of large machine base plates, such as centrifugal pumps, conveyors, generators, soleplates, anchor bolts, crane rails, etc Ideal for...
Sika Parex Railfast Grout
A polyester resin based material used for grouting where rapid early strength development is required. Railfast Grout can be used at section depths between 10mm and 25mm without the aggregate component, or for section depths between 25mm and 75mm with the aggregate component. Its uses include: Grout pads under rail base plates Filling of...
Weber Webercem Grout Eco
A general purpose, non-shrink cementitious grout, ideal for general void filling, grouting under baseplates, fixing barriers and underpinning. General purpose grout suitable for use over a temperature range of between 5°C and 25°C Useful for grouting under stanchions and baseplates Note: Webercem Grout Eco must only be used in confined...
Weber Webercem Advanced Precision Grout
Webercem Advanced Precision Grout is a single component shrinkage compensated flowable precision grout, developed for applications where good flow and strength is required. Applicable by pump, pouring, trowelling or dry packing. Ideal for static loads. Webercem Advanced Precision Grout is shown to be effectively non-shrink by Early Volume...
Need Help?
Need Help?
Specialist Grouts for Structural Work | High-Performance Grouting Solutions
Specialist grouts deliver critical support where stability, strength, and load transfer matter. Whether anchoring steel structures, filling voids, or bedding machinery, they offer controlled placement and high early strength to keep projects moving. These grouts are trusted across civil engineering, industrial maintenance, and commercial construction, where accuracy under pressure is essential.
Used in sequence with trusted Building Supplies like cementitious mortars and structural repair materials, grouts help form complete, high-performance installations. With tailored flow rates, set times, and compressive strengths, they meet the technical demands of structural engineers, installers, and contractors working under pressure.
Grout FAQs
Are any of these grouts suitable for use in wet conditions?
Yes, certain formulations are designed to perform in saturated or submerged areas. Check technical data for suitability.
How should I mix the grout for best results?
Mechanical mixing is strongly recommended for consistency. Hand mixing may be acceptable for very small quantities.
Can grouts be used with reinforcing steel?
Yes, many grouts are compatible with rebar and other steel fixings — provided surfaces are clean and corrosion-free.