Filter By

CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

Heat Resistant Adhesives

Fire-resistant adhesives for use with fire applications, fixing most coverings and materials to a wide range of surfaces and substrates for extra fire protection in new builds and retro-fitting projects.

Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.

For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.

There are 7 products.

Showing 1-7 of 7 item(s)

Active filters

Envirograf Acrylic Thixotropic Adhesive

Acrylic Thixotropic Adhesive specifically-designed for use with a wide range of materials used in fire resistant/retardent applications, bonding materials to most substrates. Very low odour Water-based Ready to use Strong and flexible bond Can be used on damp substrates Available from 310ml tubes up to 5 litre tins Full cure in approx...

Price £8.12
In stock

Envirograf Buildfix Multi-Purpose Flexible Building Adhesive

Buildfix Multi-Purpose Flexible Building Adhesive is a multi-purpose adhesive for fixing most materials and substrates, giving a strong flexible bond that is water-resistant when dry, reducing the need for screws and nails. Great for fixing skirting, dado rails, panels and plasterboard. Low odour Solvent-free Ready to use Convenient...

Price £5.11
In stock

Envirograf Hi-Tak Spray Adhesive

Hi-Tak Spray Adhesive, a fast acting high-strength adhesive for most substrates and materials, including car and vehicle repairs and refurbishments. 500ml spray can Easy to apply Use with Envirograf Fire Barrier Curtains (Products 56 and 57)

Price £14.50
In stock

Envirograf Envirogrip Fire-Resistant Adhesive

Envirogrip Fire-Resistant Adhesive is flexible and multi-purpose, ideal for builders and tradesmen alike. Low odour Solvent-free Ready to use Bonds most materials & substrates Applies to damp substrates without affecting strength Can be prepared & painted over

Price £7.84
In stock

Envirograf Firobond Ultra Adhesive

Firobond Ultra Adhesive bonds a wide range of materials and substrates, including all woods and joints, in fire protection applications. Bonds mineral wool insulation Magnesium oxide/cement boards Fully cured in 24 hours Thixotropic, for easy application

Price £17.14
In stock

Firetherm Intutac

Firetherm Intutac bonds structural steel and ductwork protection boards in internal situations Sodium silicate adhesive Bonds in 5 minutes Fully cured in 8 to 12 hours Forms a water-resistant seal unaffected by moisture Forms to a non-combustible film to BS 476 Part 4: 1970 Supplied in a 10 litre tub (1.7KG per litre)

Price £94.20
In stock

Protecta FR IPT 4hr One Part Sealant & Adhesive

Protecta FR IPT 4hr One Part Sealant & Adhesive, a high performance, professional quality, one-part ready-to-use sealant and adhesive with up to 4 hours fire protection - offering tradesman one solution for all internal building applications. Suitable for a wide variety of internal building trade applications including decorating,...

Price £91.26
In stock