Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Fire-resistant adhesives for use with fire applications, fixing most coverings and materials to a wide range of surfaces and substrates for extra fire protection in new builds and retro-fitting projects.
Fire protection doesn’t have to be hard work, let our technical staff help you get the level of protection you require and the finish you want. If there is a product you cannot find, please contact our Technical and Sales Support Team on 0113 245 5450.
For clarification on minimum requirements before buying one of our fire-stopping products, please review the information provided in the 'DATASHEETS' tab on the product in question. A written specification should be obtained from our Technical Department for your project prior to use to ensure the product will be suitable.
There are 2 products.
Active filters
Nullifire (Firetherm) FO142 Intutac bonds structural steel and ductwork protection boards in internal situations.Sodium silicate adhesive Bonds in 5 minutes Fully cured in 8 to 12 hours Forms a water-resistant seal unaffected by moisture Forms to a non-combustible film to BS 476 Part 4: 1970More Information Delivery Info
£36.44 (incl. VAT)
£30.37 (ex. VAT)
Nullifire FO143 Intutac Gun Grade Silicate Adhesive is a silicate-based adhesive, which can be applied with a caulking gun. FO143 is used to bond different kinds of materials in the fire protection industry.Up to 240 minutes fire resistance Suitable for bonding Nullifire FJ203 Fire Resistant Backer Rod in concrete joints, rock fibre...
£305.77 (incl. VAT)
£254.81 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
