Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...
Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...
Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...
Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...
Rawlins Paints offer a wide range of 2-pack (a resin base component supplied with a separate chemical activator to be mixed together before use), ‘heavy duty commercial sector’ and industry leading floor paints. These are ideal for areas of heavy vehicular use in industrial spaces, where only the most durable and hard-wearing surface coatings will do. The heavy-duty concrete floor paints in this section are able to offer chemical resistance, UV stability, fast curing times and added flexibility. They consist of epoxy floor paint, polyurethane floor paint, solvent free, MMA, polyaspartic floor coatings and more which are products that can withstand the harshest conditions.
For industrial environments and on concrete floors where extremely heavy equipment and machinery needs to be permanently set-up, a reliable, self-levelling floor paint system is a must – one that offers years of resistance to extreme wear and tear, potential impact from dropped tools and even Winter Grade paints for the harshest of cold storage conditions. For any further technical or application advice on the products listed here, please contact us on 0113 245 5450.
- Brand: Rust-Oleum
Rust-Oleum 5300 Epoxyshield Maxx is a user friendly and easy to apply water-based 2 component epoxy concrete floor coating with an ultimate adhesion and durability: Maximum durability in just 1 coat For medium to heavy traffic Easy to apply, no primer required Long-lasting gloss finish Highly resistant against solvents and chemicals...
Rust-Oleum 5800 Epoxy Rapid WB is a fast curing epoxy floor paint for inside use. For garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Overcoatable after just 3 hours Available in matt or gloss finish Water-based, so no odour and safe to use Excellent flow Nice smooth finish, easy to clean Ample application...
Rust-Oleum’s strongest coating ever, based on the latest rapid curing polyaspartic technology for inside or outside use. This makes Rust-Oleum 9700 Coldmax Rapid (Standard) ideal when extra protection against traffic and chemicals is needed. Overcoatable after just 4 hours Wintergrade version can be applied as low as -10 °C Excellent...
Rust-Oleum 5500 Solvent Free Epoxy is a high build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers. High build coating (150 microns), very durable Suitable for frequent (chemical) cleaning Excellent resistance against immersion...
Rust-Oleum 9100 High Performance Epoxy is a two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application. Coverage Calculator
Rust-Oleum B95SL Flexible Self Levelling Epoxy is a virtually solvent free, two component epoxy flooring system, with a convenient 1:1 mixing ratio. It should be used on cleaned, horizontal concrete, asphalt-concrete, or other floors where flexibility is required. The coating offers protection against abrasion and impact and can be applied up...
Rust-Oleum 9600 Rust-O-Thane Polyurethane is a solvent based, flexible polyurethane topcoat leaving a high gloss finish. Resistant to ponding water, UV and chemicals Rust-Oleum 9600 Rust-O-Thane Polyurethane is available in almost any colour and does not fade. Ideal for gutters, pipes, exterior metal (fences, railings, etc.), floors and other...
Rust-Oleum 9100 Winter Grade Epoxy coating for application at temperatures down to 0°C. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application. Single coat application directly over rusted...
Rust-Oleum 9100 High Solids Epoxy is a higher solids, better coverage and lower VOC content product than the standard 9100 Epoxy. Two-pack, glossy epoxy coating for metal, walls and floors. The most efficient epoxy system providing a very hard coating with high layer thickness for lasting results even with a single coat application. Single...
Rust-Oleum’s strongest coating ever, based on the latest rapid curing polyaspartic technology for inside or outside use. This makes Rust-Oleum 9700 Coldmax Rapid (Wintergrade) ideal when extra protection against traffic and chemicals is needed. This versatile coating can also be used outdoors and in cold rooms and freezers. Overcoatable...
Rust-Oleum 9400 Rust-O-Thane SL is a high build, self-levelling, solvent-free polyurethane that delivers a smooth and seamless finish on interior industrial floors. It should be used on cleaned, horizontal concrete or asphalt floors and is ideal for manufacturing, packaging and warehousing areas. Seamless smooth industrial finish Excellent...
Rust-Oleum 9200 Rust-O-Thane is a satin, water based polyurethane for a very durable and colourfast finish on coated floors, walls and primed metal. Especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required. Rust-Oleum's hard wearing, washable...
Concrete Floor Paint
Many of our heavy use concrete floor paints are also suitable for cement, stone, metal, tarmac and asphalt surfaces, amongst others, and each product comes with a data-sheet offering further information. Many are also fast curing and flexible. If your bare and newly installed concrete flooring needs tough and abrasion resistant paint, you will be able to find the perfect paint for the job at rawlinspaints.com
The concrete floor paints in this section are ideal for: Warehouses, store-rooms, boiler rooms and facilities, factory units – food and beverages, heavy-load machinery, manufacturing plants – showrooms, school corridors, cold storage rooms, garages, workshops and more.
Epoxy Heavy Duty Floor Paints
Epoxy floor paints are most commonly used in heavy-duty and industrial facilities, where a tougher coating, with improved abrasion resistance is a necessity. These paints are supplied in two liquid components (an epoxy resin and a hardener). They must be mixed together directly before application as a floor coating (full proportional measurements are provided with each product) and most can be applied simply by brush or roller. The coating will dry to leave a smooth finish, but paint additives can be added to create a gritted and anti-skid surface – as often found in frequently wet areas in food processing plants that generate a lot of steam – such as oven chips, soups and tinned cooked meat. Full technical and application support is available from Rawlins Paints.
Epoxy floor paints provide an economical solution to a hard-wearing floor coating that are simple to apply and give a wide choice in colour that can be easily applied.
Garage and Workshop Floor Paint
These are areas where medium to heavy vehicular use is a daily thing and the floor surfacing must be able to withstand oil, petrol and other chemical spills, without eroding through or corroding the floor paint. The surface may preferably need to be self-levelling, for health and safety reasons, or for easier transportation of sensitive equipment around the work-space.
As garage and workshops frequently have access doors open during working hours, the floor coating will need to be able to withstand excessive sun and UV exposure. For the other seasons, it’ll also need to stand up to rain, sleet and snow falling/dripping off cars, vans, pallet-trucks and lorries that are brought in for repair. It’s not always possible to clean up mild chemical spills under vehicles, or rain/snow, so the heavy-duty floor coating will need to be resistant to these chemicals – especially salt from rain water – which can cause a lot of damage to concrete and brick.
Many garages and workshops have floor marking for parking bays and equipment zones. Rawlins Paints also sell a wide range of line marking paints and tapes, ideal for this.
Warehouse Floor Paint
Warehouses, such as those found in major supermarkets and retail outlets, often have stock that stands still for large seasonal periods of time. Storage trolleys and cages may require a non-slip, finish for staff to safely manoeuvre them from the shop-floor back into storage. They will also need to regularly undergo strict health and safety checks for damage and hygiene properties. It is not enough to wear suitable shoes and the floor surface must be able to withstand damage from dropped stock, forklift truck access and heavily stacked items – such as heavy-duty metal garden equipment.
All warehouses will have delivery bays, where the interior flooring will be exposed to harsh weathers, as well as delivery truck access. For these purposes, specific heavy-duty floor paints by Coo-Var, Jotun, Mathys, Sika and Rust-Oleum will be suitable.
Whilst it is procedure to use appropriate transportation equipment to move around gas bottles or liquid filled drums, they will frequently need to be jimmied into place, and this can cause friction damage. The heavy-duty floor paints available at Rawlins Paints can withstand many types of ‘pressure abuse’ from large and heavy objects.
From Food Processing to Car Building Plants
Whilst the definition of a factory is standard, the types of goods processed, built or developed in one will cover an incredible range. From major car brand manufacturing plants, to factories processing or packaging foods, each will have bespoke and top-of-the range technical equipment. The contact point of an object with the floor must be of optimal quality – not only for insurance or health and safety reasons, but for longevity too.
These types of plants have high pedestrian traffic, often accessed 24/7 by staff, and will therefore need to be cleaned a lot. Many of these environments will use industrial cleaning equipment, so the floor coating must be chemical resistant. Rawlins Paints also stock damp-proof coatings which are ideal for situations where the substrate may have residual moisture from either being freshly laid or through lack of a DPM (Damp Proof Membrane). Perfect for new build or old building renovation.
MMA – methyl-methacrylate
Typically used by professional, experienced applicators due to their extremely short working time. MMA coatings are ideal for many aspects of exterior and car park coating and marking, as well as being used on specific internal projects MMA paints can be applied over worn-out and degraded thermoplastic road markings (ensure the surface is sound before application). Often the preferred system for heavy-use motorway junction road markings – see also pedestrian crossings, yellow boxes and stop/yield areas.
Most MMA (methyl-methacrylate) products can be used on bituminous, concrete and paved surfaces and cure for FULL use in as little as 1 hour and can cure down to temperatures as low as -20°C!
Polyurethane Paints and Coatings
Polyurethane paints are usually chosen for their high gloss finish, excellent UV, weather and chemical resistance, as well as being ideal for industrial sectors where a hygienic floor coating is required – high moisture/high humidity environments. Sika offer a particularly good polyurethane range of coatings with some of the industry’s best self-levelling systems.
As with all paints in our online store, we recommend reading the data-sheets provided, as each paint will offer different qualities to a job. There is no one paint that does all jobs, and for some projects polyurethane coatings will be ideal – with several different brands providing polyurethane paints at rawlinspaints.com, please contact us for further support, if required.
Painting floors with high-quality commercial or industrial coatings is much more cost effective and less disruptive to a project than using cheaper substitutes. Larger projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to internal or external flooring will last for an agreed period of time - if correctly maintained.
Using our products, it is possible to decorate and protect concrete, tarmac, asphalt, wood or metal floors, both improving its life expectancy for greater periods of times, and delivering waterproofing and protective properties that can lower the risk of major repair and costly maintenance work. Achieve long-lasting results, with the wide range of floor paints and coatings available at Rawlins Paints today.
We offer systems that are available in virtually any colour and finish - including colour matching existing decorative or company colour schemes - in our light to medium (pedestrianised) right up to heavy use (light to medium vehicular activity) coatings for a wide range of interior or exterior substrates and surface materials.
A trained member of our Technical Support Team will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.
By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.
If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450