Hydron Nu-Flame Fire Upgrade System (For Timber)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only

Price £352.35 Regular price £391.50
In stock

Sherwin-Williams Macropoxy 400

Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...

Price £58.12 Regular price £64.58
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock
All sale products

Need Help?

Home

There are 74 products.

Showing 1-12 of 74 item(s)

Active filters

  • Categories: Cleaners

Rust-Oleum Epoxyshield Cleaner / Degreaser

Rust-Oleum 2901 Epoxyshield Cleaner/Degreaser for floors is a concentrated, alkaline, non-flammable, virtually odour-free cleaning/degreasing solution. Removes grease, oil and other contaminations Virtually odour free Non-flammable 6-8 m²/l coverage

Price £32.56
In stock

Rust-Oleum Mathys 108 Surfa Etch Solution

Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system. Improves the adhesion of coating systems Neutralizes alkaline salts Also ideal to remove "white...

Price £40.12
In stock

Teamac Mordant Solution (T Wash)

Teamac Mordant Solution (T Wash), is a pre-treatment for new galvanised steel to ensure adhesion of subsequent coatings.  Satisfactory treatment will be shown by a colour change to dark grey throughout the whole surface. Advantages Application: Brush, Dip, Roller Coverage: 40 Square Metres Per Litre Suitable For: Galvanised Metal...

Price £37.88
In stock

Rust-Oleum Mathys ND14 Cleaner Degreaser

Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates. Concentrated formulation can be diluted 1:20 Use as additive for high pressure cleaning Non-flammable, virtually odour-free

Price £62.28
In stock

Rust-Oleum FK111 Cleaning Solution

Rust-Oleum FK111 Cleaning Solution is a concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution for vertical substrates like walls. High-viscosity formulation is ideal for use on walls, does not run off the wall Removes grease, oil, proteins , dirt and many other contaminants Usable as additive for...

Price £37.43
In stock

Coo-Var Universal Degreaser Cleaner

Coo-Var Universal Degreaser Cleaner is a careful blend of solvents to give powerful cleaning and degreasing properties.  Product Features Degreases and removes oil patches from floors, walls, interior and exterior surfaces prior to acid etching or painting. Part of the cleaning process. Essential for a good finish. Can also be used as a...

Price £18.11
In stock

Coo-Var Acid Etch

Coo-Var Acid Etch is a careful blend of acids and wetting agents in solution, used to clean and ‘etch’ concrete/mortared floors and pools prior to painting. Used to prepare new and smoothed concrete. Product Details Removes laitance from concrete/render Removes salts from concrete/render Can be used as a degreaser Removes patches of oil...

Price £21.85
In stock

Coo-Var Oil Remover

Coo-Var Oil Remover is a water based, environmentally friendly cleaner with powerful cleaning and degreasing properties. To be used to degrease and remove oil patches from the surface prior to acid etching or painting. An excellent addition to the cleaning and preparation process. Product Features Designed for use on floors, walls and...

Price £28.52
In stock

Blackfriar Professional Acid Etch

Blackfriar Professional Acid Etch is a surface preparation solution for use on concrete and screed floors that removes excess lime dust (laitence) which can interfere with the adhesion of floor coatings.  Product Features Hydrochloric acid solution. Etches power floated, very smooth, hard or chemically treated concrete floors to ‘key’ the...

Price £18.11
In stock

Rust-Oleum Mathys AMW Fungicidal Wash

Rust-Oleum Mathys AMW is a ready mixed fungicidal wash; a solution of an approved biocide in water (HSE Approval No 4246).  It should be used as a masonry surface fungicidal wash for professional use against mould, fungi, moss, etc. Also suitable for treatment of similarly affected roof surfaces. Removes and prevents growth from fungi and...

Price £22.57
In stock

GacoFlex GacoWash

GacoFlex GacoWash is a concentrated cleaning solution for roof membranes and existing waterproof systems. It is specially formulated to remove tough dirt, pollen, mildew and fungus. Ideal for use as a cleaning solution for aged asphalt, aged EPDM and TPO/CPA, built-up, cap sheet, composite, concrete, fiberglass, metal, modified bitumen and...

Price £110.00
In stock

Thermilate PRO Fungicidal Wash

Thermilate PRO Fungicidal Wash instantly kills moss, lichen, algae and mould. The new formula contains naturally occurring fungicides found in edible vegetation together with the most effective organic preservatives to provide the most sustainable solution to an age old problem.

Price £20.15
In stock