CLEARANCE - Axalta ViterClad 50 Finish

Axalta ViterClad 50 Finish is a two pack recoatable polyurethane finish specially formulated for the maintenance and repainting of architectural cladding, especially recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding. Available in 350+ colours Expected system lifetime up to 15 years (depending on exposed...

Price £55.81 Regular price £111.63
In stock

CLEARANCE - Bradite One Can

Bradite One Can is a quick-drying primer/finish coat in one can, with excellent adhesion, stain blocking and anti-corrosive properties. Suitable for use over most properly cleaned and prepared commercial wood, uPVC, glass, plastic and metals. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Available in...

Price £9.99 Regular price £19.95
In stock

CLEARANCE - Bradite Industrial Degreaser

Bradite Industrial Degreaser is an aqueous alkaline low foaming detergent used for degreasing contaminated surfaces prior to painting. Ideally suited for degreasing oily or soiled surfaces and for removing road dirt. Manufactured under the auspices of an ISO 9001:2008 & ISO 14001:2004. Advantages Biodegradable in general use...

Price £5.69 Regular price £11.38
In stock

CLEARANCE - Bradite Pre-Treat Galvanised Steel

Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use. Advantages British gas reference BGC MO1. Department of Transport Item NO:155. ISO 9001:2008 ISO 140001:2004 1 x 1l available...

Price £5.25 Regular price £10.51
In stock
All sale products

Need Help?

Home

There are 184 products.

Showing 157-168 of 184 item(s)

Active filters

  • Categories: Fire Retardant Paints

Protecta EX Mortar Fire Rated Compound

Protecta EX Mortar, a highly thermally-insulating fire sealing compound to prevent the spread of fire and smoke through openings in fire rated walls and floors. Use to seal up gaps around services such as cables, bundled cables, cable racks, cable trays, steel, copper, alupex, plastic pipes and air ventilation ducts on concrete, bricks, Leca,...

Price £13.97
In stock

Protecta FR Pipe Collars

Protecta FR Pipe Collars maintain the fire resistance of fire rated walls & floors, where breached by service penetrations, for up to 240 minutes & may be used in drywalls, masonry or concrete walls & floors around plastic pipes, composite pipes, metal pipes & cable bundles. Simple to install using standard fixings - 30...

Price £4.56
In stock

Protecta FR Foam

Protecta FR Foam, part of the Protecta Firestopping range, maintains fire resistance in walls by filling linear gaps in concrete and masonry walls, with excellent adhesion to most materials used in construction and excellent durability during service once cured. Fire protection foam Single-component, available in 750ml hand-or-gun-grade...

Price £81.79
In stock

Protecta FR Pipe Wrap

Protecta FR Pipe Wrap maintains fire resistance of fire-separating drywalls, masonry or concrete walls and concrete floors up to 240 minutes when these are breached by services such as plastic pipes, conduits or metal pipes with continuous combustible insulation. Intumescent wraps simply fit around services, reacting in heat and expanding...

Price £33.78
In stock

Protecta FR Service Transit

Protecta FR Service Transit, intumescent pipe & cable sleeves that help maintain fire resistance of walls & floors breached by continuous cables, conduits & plastic pipes, providing fire protection integrity & insulation for up to 240 minutes. Safe, easy & quick to fire stop service penetrations - ideal for retrofitting...

Price £72.13
In stock

Protecta FR Coating

Protecta FR Coating is an ablative sealant coating applied by sprayer directly on to mineral fibres to enhance, seal & protect from fire by resisting flame spread, fire penetration & passage of hot gasses. Coated mineral fibres help prevent the spread of fire & smoke through openings in fire rated walls & floors, suitable for...

Price £35.80
In stock

Protecta Service Coating FR-1

Protecta Service Coating FR-1, a water-based intumescent coating for the fire protection of cables in a service installation. The coating upgrades the insulation and integrity of the installation and is non-toxic, emission free, durable and can be applied in one coat saving time and money. Can be used in combination with Protecta FR Board...

Price £41.61
In stock

Protecta FR Putty

Protecta FR Putty, fire protection putty pads (also known as firestopping gaskets) for reinstating fire ratings in electrical sockets, services and water supply boxes. Supplied as a non-setting putty with a low pressure intumescent for optimal fire protection. The putty is hand workable and easy to apply, re-useable and re-serviceable due to...

Price £28.43
In stock

Nullifire SC602 On-Site Intumescent Base Coat

Nullifire SC602 On-Site Intumescent Base Coat, a single pack acrylic thin film intumescent basecoat for fire protection of internal & semi-exposed structural steelwork up to 60 minutes. Easy to apply, designed for on-site application by airless spray Weather resistance (up to 6 months once cured) ensures more effective project planning...

Price £202.70
In stock

Protecta FR Graphite Plate

Protecta FR Graphite Plate, preformed self-adhesive intumescent plates to reinstate the fire resistance performance of flexible wall constructions for up to 120 minutes when punctured with plastic wall boxes. Used where walls have been provided with apertures for the penetration of conduits and cables into socket boxes, on one or both sides of...

Price £8.91
In stock

Protecta FR Damper

Protecta FR Damper fire proofs ventilation ducts that pass through fire-rated walls & floors, preventing spread of fire & smoke both surrounding & inside  ducts. The steel casing contains horizontal steel blades treated with a technically advanced heat expanding graphite, closing off the damper in fire. Closes in the area where...

Price £16.76
In stock

Sherwin-Williams Firetex FX1005

Sherwin-Williams Firetex FX1005, a single pack thin-film white intumescent coating for structural steel, providing up to 120 minutes fire protection. Designed for site application by airless spray - can also be brushed Tested and assessed to EN13381-8 European Technical Approval 16-0588 CE Marking Number 1121-CPR-GA5030 Can be exposed...

Price £207.90
In stock