Hydron Nu-Flame Fire Upgrade System (For Timber)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only

Price £369.97 Regular price £411.08
In stock

Hydron Nu-Flame Fire Upgrade System (For Walls and Ceilings)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas such as stairwell, corridors and lift lobbies without the need to strip the current paint. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection. For interior use only. Pack comes complete with the Heat...

Price £329.81 Regular price £366.45
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock
All sale products

Need Help?

Home

There are 106 products.

Showing 1-12 of 106 item(s)

Active filters

  • Categories: Special Use

International Intergard 410

International Intergard 410 is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance. Suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail. Coverage Calculator

Price £81.51
In stock

Rust-Oleum 9600 Rust-O-Thane Polyurethane

Rust-Oleum 9600 Rust-O-Thane Polyurethane is a solvent based, flexible polyurethane topcoat leaving a high gloss finish. Resistant to ponding water, UV and chemicals Rust-Oleum 9600 Rust-O-Thane Polyurethane is available in almost any colour and does not fade. Ideal for gutters, pipes, exterior metal (fences, railings, etc.), floors and other surfaces...

Price £37.59
In stock

Sikagard 62

Sikagard 62, a two part, rigid, 100 % solids, coloured high build epoxy resin based protective coating that may only be used by experienced professionals. Solvent-free with good mechanical and chemical resistance, the coating is impervious to liquids and is easy to mix and to apply. Uses include: Chemical resistant protective layer on...

Price £99.99
In stock

Sikagard 63 N

Sikagard 63 N is a two part epoxy protective coating with high chemical resistance. It is an abrasion resistant, universal coating material for use on concrete, cementitious mortars and rendering, epoxy mortars (including Sika EpoCem), steel and aluminium designed for normal to highly aggressive chemical environments. Very good chemical and...

Price £232.00
In stock

International Interline 955

International Interline 955 is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.  Chemically resistant, vinyl ester coating Can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F) Coverage Calculator

Price £791.79
In stock

Jotun Tankguard 412

Jotun Tankguard 412 is a two component solvent free polyamine cured epoxy coating that is a general purpose tank lining. Good chemical resistance. Can be used as a primer, mid coat or finish coat in atmospheric and immersed environments Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates...

Price £185.61
In stock

Jotun Tankguard HB Classic

Tankguard HB Classic is a pure epoxy tank coating suitable for both transportation and storage of a wide range of chemicals including crude oil, aromatic and aliphatic solvents and others. Can be used as primer, mid coat or finish coat in atmospheric and immersed environments Suitable for properly prepared carbon steel, galvanised steel,...

Price £192.42
In stock

Jotun Tankguard Storage

Jotun Tankguard Storage is a two component novolac epoxy coating is a specially designed tank lining with excellent chemical resistance. It can be used as primer, mid coat and finish coat in atmospheric and immersed environments. Chemical resistant Resistant against crude oil up to 90°C Application of two coats in one day Flexible dry...

Price £178.93
In stock

Jotun Tankguard SF

Jotun Tankguard SF is a two component solvent free amine cured novolac epoxy coating that is a specially designed tank lining with very good chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and...

Price £314.75
In stock

Jotun Tankguard DW

Jotun Tankguard DW is a two component solvent free amine cured epoxy coating that is specially designed for drinking water tanks. It can be used as a primer and finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel and concrete substrates. Potable water/drinking water approvals –...

Price £246.14
In stock

Jotun Tankguard Zinc

Jotun Tankguard Zinc is a two component moisture cured inorganic zinc ethyl silicate coating that is a specially designed tank coating and lining with excellent cargo resistance. To be used as a single coat system only, in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates. Resistant to methanol...

Price £268.83
In stock

Jotun Tankguard Special Ultra

Jotun Tankguard Special Ultra is a two component polyamine cured novolac epoxy coating specially designed as a tank coating with excellent chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel and stainless steel...

Price £338.23
In stock