We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Low construction height
High impact sound improvement achievable
On insulation layers single loads of up to 4,0 kN and surface loads of up to 5 kN/m² minimal mass per m²
SCHÖNOX RENOTEX 3D System is suitable for the construction of floating screeds in:
New and old buildings
Renovation work
Modernisation work
Ideal in combination with mineral wool to improve the impact sound insulation
SCHÖNOX RENOTEX 3D System is suitable:
Under textile and elastic coverings
Under multi layer parquet
Under solid parquet (Obtain special information)
For full-surface levelling under sealings and coatings
For reconstruction and renovation, wherever, there an additional uncoupling is necessary
In interior areas
Substrates
SCHÖNOX RENOTEX 3D System is suitable on:
Concrete
Cement and rapid cement screeds
Calcium sulphate based screeds
Mastic asphalt screeds
Magnesia screeds with mineral aggregates
Wood planks
Foil membranes
Old particle board floors, not sufficient dimensional stable
Old substrates
Requirements of substrate
Adequate strength, evenness, dimensional stability and dryness
Separate SCHÖNOX RENOTEX 3D System from the vertical structure by installing the edge strip SCHÖNOX RS 50
The thickness of the edge strip must be adapted to the size of the area
With subsequent installation of floor coverings, cement screeds are required to display a residual moisture reading of ≤ 2.0 CM-% (heating screeds ≤ 1.8 CM-%), calcium sulphate screeds should have a reading of ≤ 0.5 CM-% (heating screeds ≤ 0.3 CM-%). Rooms in buildings without a basement, are to be sealed against rising dampness in compliance with the standard
The requirements of the relevant valid standards, guidelines and data sheets apply
Application
For cutting SCHÖNOX RENOTEX 3D it is recommended using cordless electrical scissors
All information applies to standard conditions and relates to the non-extended levelling compound
Please follow the relevant product data sheets when using complementary products
Product Details
SCHÖNOX-9814
Data sheet
Manufacturer
SCHÖNOX
For Use On
Concrete, screeds, wood planks, foil membranes, old substrates
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
SCHÖNOX RENOTEX 3D is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. SCHÖNOX HS 50 (previously known as AP Rapid Plus) is an extremely low-stress hybrid levelling compound with a wide range of applications. It...
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. SCHÖNOX RS 50 is a marginal strip that prevents acoustic bridges with self-adhesive foot and the ability to resume its shape. No additional...