HMG Brushing Additive A1257


HMG Brushing Additive A1257 is an additive designed for alkyd enamels.

  • Designed to aid the brushability and wet edge time

£24.76(ex. VAT)
£29.72 (inc. VAT)
Please choose your colour
Available for Delivery (See Delivery Options Below)


HMG Brushing Additive A1257 is an additive designed for alkyd enamels.

Click To Jump To Section:

Features & Benefits

  • Designed to aid the brushability and wet edge time

Product Specification

Technical Data
HMG Brushing Additive A1257
Volume Solids: 27.5%
VOC Content: -
SG: -
Viscosity: Not determined
Density: 0.894 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers.
Flash Point: 40°C

Surface Preparation

  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
  • Read and follow the safety data sheet, product data sheet and label instructions.
  • Stir all paints thoroughly before use.
  • Always use the same batch number on the same job.
  • Check colour & sheen.
  • Filter the product immediately before use.
  • Reduce emissions and maintain quality by replacing tin lid after use.

Product Notes

Information On Basic Physical And Chemical Properties
HMG Brushing Additive A1257
Form: According to product specification
Colour: According to product specification
Odour: Characteristic
Odour Threshold: Not determined
pH-value 20°C: Not determined
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: 150°C
Flash Point: 40°C
Flammability (solid, gas): Not applicable
Ignition temperature: 245°C
Decomposition temperature: Not determined.
Auto-ignition temperature: Product is not selfigniting.
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 0.7 Vol %
Explosion limits: Upper: 6.1 Vol %
Vapour pressure at 20°C: 2.1 hPa
Density at 20°C: 0.894 g/cm³
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: Not determined
Viscosity: Kinematic: 13 s (DIN 53211/4)
Solvent content: Organic solvents: 60.9%
Solvent content: 27.5%

Health & Safety

  • Refer to the safety data sheet in the attachments section above and tin label prior to use.

Click to go back to the top of the page

Product Details

Data sheet

HMG Paints Limited
Single, Two or Three Pack
Pack Size
Single part pack
0.894 g/cm³
Solids by Volume
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers.
UN Number

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields