HMG Acrythane Glass Adhesion Additive

ADD3682

HMG Acrythane Glass Adhesion Additive is an additive to improve adhesion of selected coatings to glass.

Size
£121.35
£145.62 Incl. VAT
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

HMG Acrythane Glass Adhesion Additive is an additive to improve the adhesion of selected coatings to glass.



Click To Jump To Section:




Features & Benefits




Product Specification


Technical Data
HMG Acrythane Glass Adhesion Additive
Volume Solids: 38.6%
VOC Content: 0.550kgs/ltr
SG: 0.92
Viscosity: Not determined
Density: 0.92 g/cm³
Storage Conditions: Store between 5°C - 25°C. When not in use, cans must be kept sealed.
Shelf Life: 12 months from delivery date in original sealed containers.
Flash Point: -4°C



Surface Preparation


  • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
  • Read and follow the safety data sheet, product data sheet and label instructions.
  • Stir all paints thoroughly before use.
  • Always use the same batch number on the same job.
  • Check colour & sheen.
  • Filter the product immediately before use.
  • Reduce emissions and maintain quality by replacing tin lid after use.



Product Notes


Information On Basic Physical And Chemical Properties
HMG Acrythane Glass Adhesion Additive
Form: According to product specification
Colour: According to product specification
Odour: Characteristic
Odour Threshold: Not determined
pH-value 20°C: Not determined
Melting point/freezing point: Undetermined
Initial boiling point and boiling range: 80°C
Flash Point: -4°C
Flammability (solid, gas): Not applicable
Ignition temperature: 370°C
Decomposition temperature: Not determined.
Auto-ignition temperature: Product is not selfigniting.
Explosive properties: "Product is not explosive. However, formation of explosive air vapour mixtures are possible."
Explosion limits: Lower: 1.1 Vol %
Explosion limits: Upper: 11.5 Vol %
Vapour pressure at 20°C: 105 hPa
Density at 20°C: 0.92 g/cm³
Relative density: Not determined
Vapour density: Not determined
Evaporation rate: Not determined
Solubility in / Miscibility with water: NOT MISCIBLE
Partition coefficient: n-octanol/water: Not determined
Viscosity: Dynamic at 20°C: Not determined
Viscosity: Kinematic: Not determined
Solvent content: Organic solvents: 60.2%
Solvent content: 38.6%



Health & Safety


  • Refer to the safety data sheet in the attachments section above and tin label prior to use.
  • Product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.

Click to go back to the top of the page

Product Details
ADD3682

Data sheet

Manufacturer
HMG Paints Limited
Water / Solvent Based
Solvent
For Use On
Glass
Single, Two or Three Pack
Single
Pack Size
1L
Parts
Single part pack
Density
0.92 g/cm³
VOC
0.550kgs/ltr
Shelf Life (from date of manufacture)
12 months from delivery date in original sealed containers.
Size
1L
UN Number
UN1993
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

HMG Acrythane XSC21

HMG Acrythane XSC21 (Base) is a premium quality, high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC21 Hardener (Part 2) HMG...

Price £31.75
In Stock and Available for Delivery

HMG Acrythane XSC21 Clear

HMG Acrythane XSC21 Clear is a premium quality, high solids 2K Acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC21 Clear Hardener (Part 2)...

Price £26.37
In Stock and Available for Delivery

HMG Acrythane SC601 Colours

HMG Acrythane SC601 Colours (Base) is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours Activator (Part 2)...

Price £27.00
In Stock and Available for Delivery