- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
Fine and coarse polyethylene powder paint additives. Creates a uniform finely textured surface with good abrasion resistance.
- Compatible with all Selemix System 1K and 2K topcoats without any impact on colour and on drying process
- They are also compatible with Selemix 8-110/1 Waterborne Topcoats
- For Industrial Use Only
Please note: The choice of the type of the grain size (fine or coarse) and the percentage of use from 3 to 5% on finished enamel depends on the desired level of textured of the surface.
Description
Selemix 6-560/6-561 Texture Powder Additives - polyethylene powder paint additives in fine and coarse granular texture respectively. They create a uniform finely texture surface and provide a good abrasion resistance.
They create a uniform finely textured surface and provide a good abrasion resistance. The texture powder additives are compatible with all Selemix System 1K and 2K topcoats without any impact on colour and on drying process.
They are also compatible with Selemix 8-110/1 Waterborne Topcoats.
The choice of the type of the grain size (fine or coarse) and the percentage of use from 3 to 5% on finished enamel depends on the desired level of textured of the surface.
Quick Links - Click To Jump To Section:
Features & Benefits
- Polyethylene powder paint additives
- Available in in fine and coarse granular texture
- Creates a uniform finely textured surface and provide a good abrasion resistance
- Compatible with all Selemix System 1K and 2K topcoats without any impact on colour and on drying process
- They are also compatible with Selemix 8-110/1 Waterborne Topcoats
- Please note: The choice of the type of the grain size (fine or coarse) and the percentage of use from 3 to 5% on finished enamel depends on the desired level of textured of the surface.
- For Industrial Use Only
Surface Preparation
Refer to the relevant Selemix Topcoat Technical Datasheet.
Mixing
- 6-560 and 6-561 are supplied in a 200g plastic bottle
- The bottle has a measuring cap able to contain 15g of powder additive
- Thoroughly mix paint before activating and check colour before use
- Add hardener and thinner according to the Selemix Topcoat TDS
| Features | Conventional Spray - Air-Assisted Airless |
|---|---|
By Weight: Selemix Topcoat 6-560 / 6-561 Texture Additive | By Weight: 1000 30-50 |
By Volume: Selemix Topcoat 6-560 / 6-561 Texture Additive | By Volume: 1L 2-3 capfuls |
Application Notes
| Features | Conventional Spray | Air-Assisted Airless |
|---|---|---|
| Spraygun Setup: | We recommend using the biggest nozzle diameter suggested in topcoat technical data sheet | It is always recommended to contact the pump supplier as the powder particles may cause a fast wear and tear of the mechanical parts and of the membranes |
Please see the Product Data Sheet for the relevant Selemix Topcoat for detailed Application Instructions before use.
Particle Size
- Fine Texture 6-560 - Average 24-36 Microns (Maximum 90 microns)
- Coarse Texture 6-561 - Average 60-90 Microns (Maximum 125 microns)
Note: Please see the Product Data Sheet for detailed information.
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR INDUSTRIAL USE ONLY
Product Details
9163-946194
Data sheet
- Manufacturer
- Selemix
- For Use By
- Industrial Use
- Pack Size
- 200g
- Solids by Volume
- 100%
- UN Number (Activator)
- N/A
- Specific Gravity
- 0.949
- Product Usage Type
- Additive
- Categorised As
- Accessories > Additives
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 6-560/6-561 Texture Powder Additives is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT