AdSeal Colour Pigment can be used to blend in faded or chipped areas by adding a small amount to AdSeal Imprinted Concrete Sealer. The amount added can be chosen to either add a subtle tint or to completely obscure.
Amount added can be chosen to either add a subtle tint or to completely obscure
Can also be used to colour plain concrete
Available in 6 standard colours:
Brick Red
Terracotta
Charcoal Grey
Slate Green
Walnut
Mahogany
Application
One tub of AdSeal Colour Pigment is sufficient for one 25 litre pail of AdSeal Imprinted Concrete Sealer BUT be warned start by adding a small amount and testing results – you can always add more but can’t take it out
On imprinted concrete often all that is needed is a tint. Choose the darkest colour used on the paving when installed [usually the joints]. To obliterate choose the main colour of the paving
If you want a tint then apply only a small amount (approx ¼ tub of AdSeal Colour Pigment to a 25 litre pail of AdSeal Imprinted Concrete Sealer) and stir thoroughly, then test in a discreet area and check colour when dry
If more colour is required repeat process
To completely obscure the paving then simply add the full tub of AdSeal Colour Pigment
Stir frequently during use
We would always recommend carrying out a test area to ensure you are getting the effect you require and, don’t forget, if there are a few badly faded patches you can always touch these up first with a brush & the tinted resin before applying a coat over the whole area.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
AdSeal Colour Pigment is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
AdSeal Imprinted Concrete Sealer is a hard wearing, high solids blend of UV stable MMA polymers suspended in aromatic hydrocarbons designed to seal and protect Pattern Imprinted Concrete (also known as ‘Stamped Concrete’), dries quickly to a tough, glossy finish. It protects, preserves, colours, hardens, enhances and can also be used on a wide...