| Substrate temperature (ºC) | Primer pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 10 | 600 |
| 5-15 | 10 | 400 |
| 15-25 | 10 | 200 |
| 25-40 | 10 | 100 |
| Substrate temperature (ºC) | Primer pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 20 | 1200 |
| 5-15 | 20 | 800 |
| 15-25 | 20 | 400 |
| 25-40 | 20 | 200 |
The catalyst level is critical – the minimum catalyst level is 50g per 10Kg or 100g per 20kg pail. Using less catalyst will cause partial curing and lead to product failure. Excessive levels of catalyst can lead to premature gelling and curing, which can lead to reduced adhesion to the substrate and product failure.
When using the minimum catalyst level during hot temperatures, extra time should be given to stir the mixture to ensure the catalyst mixes in fully, to prevent any curing issues.
Immediately prior to use, stir the binder thoroughly using a mechanical mixer until the resin is fully homogenised. Add the correct amount of BPO powder catalyst and mix thoroughly for at least 30 seconds. Ensure that the binder at the bottom and sides of the container is completely mixed in. Do not delay once the catalyst has been added, a chemical reaction is occurring that if left in the pail will ruin the mix.
| Substrate temperature (ºC) | PumaTrack pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 20 | 500 |
| 5-15 | 20 | 400 |
| 15-25 | 20 | 200 |
| 25-40 | 20 | 100 |
The catalyst level is critical – the minimum catalyst level is 100g per 20kg pail. Using less catalyst will cause partial curing and lead to product failure. Excessive levels of catalyst can lead to premature gelling and curing, which can lead to reduced adhesion to the substrate and product failure.
Immediately prior to use, stir the binder thoroughly using a mechanical mixer until the resin is fully homogenised. Add the correct amount of BPO powder catalyst and mix thoroughly for at least 30 seconds. Ensure that the binder at the bottom and sides of the container is completely mixed in. Do not delay once the catalyst has been added, as a chemical reaction is occurring that if left in the pail will ruin the mix.
| Substrate temperature (ºC) | PumaBrite pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 10 | 250 |
| 5-15 | 10 | 200 |
| 15-25 | 10 | 100 |
| 25-40 | 10 | 50 |
| Substrate temperature (ºC) | PumaBrite pack size (kg) | BPO powder catalyst required (g) |
|---|---|---|
| 0-5 | 20 | 500 |
| 5-15 | 20 | 400 |
| 15-25 | 20 | 200 |
| 25-40 | 20 | 100 |
The catalyst level is critical – the minimum catalyst level is 0.5% (100g per 20kg pail or 50g per 10kg pail). Using less catalyst will cause partial curing and lead to product failure. Excessive levels of catalyst can lead to premature gelling and curing, which can lead to reduced adhesion to the substrate and product failure.
Immediately prior to use, stir the pail thoroughly using a mechanical mixer until the resin is fully mixed. Add the correct amount of BPO powder catalyst and mix thoroughly for at least 30 seconds. Ensure that the binder at the bottom and sides of the container is completely mixed in. Do not delay once the catalyst has been added, as a chemical reaction is occurring that if left in the pail will ruin the mix.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hitex BPO Powder Catalyst is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
MMA cold plastic road marking materials, engineered to achieve the highest levels of retroreflectivity, durability, adhesion and colour stability. PumaBrite is suitable for structured (Type 2) enhanced wet night reflectivity, centre and edge line markings, junction markings, letters, arrows and other road marking symbols, smaller scale works...
Coloured MMA Road Surface Treatment. Quick and easy to install and ideal for walkways and cycle paths, PumaTrack surface treatment is engineered to achieve the highest levels of durabillity, adhesion and colour stabillity. Smooth or textured finish, depending on application.Separate hardener (Hitex BPO Powder Catalyst) required, levels...
Primer for Hitex Puma MMA systems on metal and concrete substrates (e.g. iron, aluminium, stainless steel), with excellent adhesion.Easy to apply Separate hardener (Hitex BPO Powder Catalyst) required, levels depend on substrate temperatureMore Information Delivery Info Hitex BPO Powder Catalyst
