Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Jotun Thinner No. 2 is a paint thinner designed to improve the flow of a range of Jotun alkyd and oil based based products. It can also be used as cleaner of pumps and tools after and before painting.
Jotun Thinner No. 2 is a paint thinner designed to improve the flow of a range of Jotun alkyd and oil based based products. It can also be used as cleaner of pumps and tools after and before painting.
Jotun Thinner No. 2 is specially suitable as a thinner for alkyd and oil based products. Recommended usage as per the specific datasheet or application guide of the product one wishes to apply.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Suren on 25/10/2018 |
Question: I want to know for 5L jotun paint how mutch need to add tinner no.2 |
Answer: You need to refer to the Technical Data Sheet and Application Guide for the product you wish to use for advice on the amount of thinner to add if required. The amount will also be dependent on your application method. These data sheets are available to download from our website on each product page. | |
International Thinner/Equipment Cleaner GTA853 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
Carboline Thinner 21 is a thinner for use in industrial coatings.
A special thinner for Rust-Oleum CombiColor 7300/7302 Hammertone. Although thinning of Hammertone is not necessary for spraying, if required it is advised to use this thinner. Also ideal for cleaning/degreasing of surfaces.
A specially formulated blend of solvents designed to mix with its compatible paint/coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. 109 Tool Cleaner can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes,...
Nullifire FC015 Thinner can be used with compatible Nullifire primers, basecoats and topcoats.
Sherwin-Williams Cleanser/Thinner No.2 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
Jotun Thinner No. 23 is a paint thinner designed to improve the flow of Jotun Tankguard epoxy products. It can also be used as a cleaner of pumps and tools after and before painting. Jotun Thinner No. 23 is specially suitable as a thinner for tankguard epoxy products.
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
Jotun Thinner No. 21 is a paint thinner, designed to improve the flow of products being applied to high temperature surfaces. It can also be used as cleaner of pumps and tools after and before painting. Jotun Thinner No. 21 is specially suitable as thinner for JotaTemp 650.
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Teamac Thinner 15 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes,...
A specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment.
Nullifire FC026 Thinner can be used for Nullifire's intumescent coatings.
Sherwin-Williams Cleanser/Thinner No.9 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
International Thinner/Equipment Cleaner GTA822 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
