Rust-Oleum 8399 Hygienic Primer is a specially formulated hygienic primer for use with Rust-Oleum 8300 Hygienic Topcoat. As a system it protects against mild chemical exposure, occasional product spillage, frequent chemical cleaning, humidity and moisture. Ideal for walls and ceilings. Very fast drying and recoatable with Rust-Oleum 8300...
Rust-Oleum Thinner 160
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum's 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment.
- Strong dilution capacity
- Can be used for many Rust-Oleum coatings
- Also ideal as a strong glue remove
Rust-Oleum Thinner 160
Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 160 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes, Rollers and Spray Equipment.
Please read all relevant data sheets on this thinner and the coating you are intending to use it with to check for compatibility, volume ratios and application suggestions. If you are unsure please contact our Technical Team on 0113 2455450.
For a guide to some of the products diluted by this thinner see below:
- 1085 Galva Zinc
- 9100 High Performance Epoxy
- B95 Flexible Epoxy
- 8399 Hygienic Primer
- 9169 Epoxy rust primer
- 9170 Epoxy metal primer
Cleaning (not Thinning) solution for the following products:
- 769 Damp-proof rust primer
- 1060/1080 High build metal primer
- 3202 Galvinoleum
- 3366 Rapid curing adhesion primer
- 5130 Damp surface primer
- 5401 Epoxy impregnation primer
- 5421 Epoxy impregnation primer
- 7201 Floorcoat PU primer
- 7500 Alkythane
- 9400 Rust-O-Thane SL
- 5500 Solvent-free epoxy
- 9700 Coldmax Rapid
- B95SL Flexible Epoxy
Density: 0.89 kg/l
- VOC level: 890 g/l
- Flashpoint: 25°C
- Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- 0.89 kg/l
- 890 g/l
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- UN Number
Be the first to ask a question about this product!
Rust-Oleum’s strongest coating ever, based on the latest rapid curing polyaspartic technology for inside or outside use. This makes Rust-Oleum 9700 Coldmax Rapid (Standard) ideal when extra protection against traffic and chemicals is needed. Overcoatable after just 4 hours Wintergrade version can be applied as low as -10 °C Excellent...
Rust-Oleum Powerfloat Epoxy Floor Primer Rapid 3366 is a rapid curing 2-component solvent-free epoxy primer designed to improve the adhesion of coatings to difficult substrates such as power-floated concrete. Overcoatable after just 3 hours: apply primer and topcoat in one day Easy all-in-1 packaging For new and aged power floated...
Rust-Oleum 5130 Primer DSP is a super-high solids two pack epoxy resin primer designed for the suppression of vapour pressure effects. Creates a barrier to stop rising moisture and vapour pressure Prevents blistering For use on asphalt and concrete Very low solvent content High build system
Rust-Oleum 5421 Epoxy Floor Primer Rapid is a fast curing primer for use on new or untreated porous mineral surfaces, like concrete to bind weak and friable substrates - can be overcoated with any Rust-Oleum Mathys epoxy floor paint or polyurethane coating. Overcoatable after just 4 hours: apply primer and topcoat in one day Easy all-in-1...
Rust-Oleum 9170/9180 Epoxy Metal Primer is a fast drying metal primer based on two-component epoxy resin offering extra protection against corrosion on bare or blasted metal, also ideal for galvanised metal under severe conditions. High build primer for optimal opacity with topcoat 9100 Touch dry after just 1 hour Contains a high amount...
Rust-Oleum 7500 Alkythane is a single pack high performance, anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C) it offers the same protection in less layers than other alkyd-systems. Available in 400+ colours Excellent opacity and corrosion protection Easy to apply, excellent flow and aspect Extra durable...
Rust-Oleum 5500 Solvent Free Epoxy is a high build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc. Optimal protection in only one or two layers. High build coating (150 microns), very durable Suitable for frequent (chemical) cleaning Excellent resistance against immersion...
Rust-Oleum 1060/1080 High Build Metal Primer is for extra protection of bare or blasted metal, offers maximum durability under severely corrosive conditions. It assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum metal primer followed by Rust-Oleum 7500 Alkythane. Protects up to C4 corrosion...
Rust-Oleum 9100 High Performance Epoxy is a two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application.
Rust-Oleum 769/780 Damp-Proof Rust Primer is a single pack rust primer for direct application on slightly moist or dry metal surfaces. It is specially developed to be applied on hand tool prepared sound rusted steel surfaces. Requires minimal surface preparation Penetrates deep into the rust for optimal protection Expels moisture &...
Rust-Oleum B95SL Flexible Self Levelling Epoxy is a virtually solvent free, two component epoxy flooring system, with a convenient 1:1 mixing ratio. It should be used on cleaned, horizontal concrete, asphalt-concrete, or other floors where flexibility is required. The coating offers protection against abrasion and impact and can be applied up...
Rust-Oleum 3202 Galvinoleum Primer is a single pack super adhesion primer for galvanised steel, plastic or other smooth surfaces. Should be used on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces. Only intended for brush application and can be recoated with Rust-Oleum 7500 Alkythane....
Rust-Oleum 9169 Epoxy Rust Primer is a low viscous epoxy rust-primer with outstanding adhesion and corrosion protection for manually derusted metals and can be recoated with Rust-Oleum 9100 topcoats. Can be applied directly to sound rusted surfaces (less work) Penetrates through rust onto sound metal Contains a high amount of rust...
Rust-Oleum B95 High Build Flexible Epoxy is a two pack epoxy for hand cleaned, blasted, primed or galvanised steel, concrete and brickwork with outstanding corrosion, wear and impact resistance. Rust-Oleum B95 High Build Flexible Epoxy is an epoxy coating with the advantages of an elastic paint that moves with the structure to stop cracking or...
Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces: Primarily intended for roller and brush application Provides a good key for adhesion on porous, mineral substrates Impregnation of porous and brittle floors Can be applied on slightly damp surfaces Also ideal...
Rust-Oleum Hard Hat 2185/1085 Galva Zinc is the No.1 high zinc content coating providing superior protection and durability for metals exposed to the elements or adverse artificial conditions. Can be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas. 90% zinc content, touch dry...
Rust-Oleum 7201 Universal Floor Primer is ready for use solvent based adhesion primer based on a special epoxyester binder. Improves the adhesion of floor paints on mineral substrates. 1 component, easy to apply it can be recoated with all Rust-Oleum or Mathys floor paints. For dense and porous floors Increases durability of the 7200 floor...
Rust-Oleum 9400 Rust-O-Thane SL is a high build, self-levelling, solvent-free polyurethane that delivers a smooth and seamless finish on interior industrial floors. It should be used on cleaned, horizontal concrete or asphalt floors and is ideal for manufacturing, packaging and warehousing areas. Seamless smooth industrial finish Excellent...
Rust-Oleum Thinner RL is a specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. It can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools...
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application. Suitable for use with Brush, Roller or Spray. Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating. Also suitable for the cleaning of...
Jotun Thinner No. 10 is a paint thinner designed to improve the flow of a range of Jotun polyurethane products. It can also be used as a cleaner of pumps and tools after and before painting. Jotun Thinner No. 10 is specially suitable as a thinner for polyurethane and similar products.
International Thinner/Equipment Cleaner GTA853 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
Tor Epoxy Thinners for the thinning (where necessary) of Tor Two Pack epoxy based materials and for cleaning of the same materials from application equipment. A blend of Xylene and Glycol Ether.
SikaCor Cleaner is a specially formulated blend of solvents designed for the cleaning of some surfaces prior to application of the SikaCor range of coatings and/or cleaning of the application tools such as brushes, rollers and spray equipment.
Britannia White Spirit is a fantastic cleaner commonly used for cleaning gloss paint from paint brushes but is also fantastic for degreasing and cleaning around the home. An excellent solution for thinning paints and varnishes. Conforms to BS 245. Advantages Cleans a variety of paints, varnishes and grease. General household cleaning and...
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistency for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 191 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as...