Rust-Oleum 6400 Fast Drying Shopprimer is a fast drying, solvent based, anti-corrosive primer for temporary metal protection intended as the first coat in shop coating applications and provides the required basic protection following metal fabrication and assembly operations. Excellent adhesion to metal Ideal for spray application...
Rust-Oleum Thinner 150
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistency for application whether it be for Brush, Roller or Spray.
- Strong thinner
- Increases flow properties
- Can also be used to remove glue
- Can also be used for the cleaning of some surfaces prior to application of the coating
- Suitable for cleaning of the application tools such as Brushes, Rollers and Spray Equipment
Rust-Oleum Thinner 150
Rust-Oleum Thinner 150 is a specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 150 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes, Rollers and Spray Equipment.
Please read all relevant data sheets on this thinner and the coating you are intending to use it with to check for compatibility, volume ratios and application suggestions. If you are unsure please contact our Technical Team on 0113 2455450.
For a guide to some of the products diluted by this thinner see below:
Density: 0.86 kg/l
See the Product Data sheet of the respective product for further details
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- 0.86 kg/l
- 860 g/l
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- UN Number
Be the first to ask a question about this product!
Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer. Withstands...
Rust-Oleum 4200 is a heat resistant aluminium finish topcoat providing heat resistance up to 425°C which should be applied over surfaces primed with Rust-Oleum 4200 Heat Resistant Primer. Withstands continuous exposure to temperatures of up to 425°C Long-term gloss retention Nice aluminum finish Single pack, easy to apply One coat is...