Alternatively you can email our sales & support team on [email protected]
Rust-Oleum 7301 CombiColor Thinner
7301.1
Rust-Oleum 7301 CombiColor Thinner is a special thinner for Rust-Oleum CombiColor. Although thinning of Rust-Oleum CombiColor is not necessary for spraying, if required it is advised to use Rust-Oleum 7301 CombiColor Thinner. It is also ideal for cleaning/degreasing of surfaces and equipment.
Rust-Oleum 7301 CombiColor Thinner is a special thinner for Rust-Oleum CombiColor. Although thinning of Rust-Oleum CombiColor is not necessary for spraying, if required it is advised to use Rust-Oleum 7301 CombiColor Thinner. It is also ideal for cleaning/degreasing of surfaces and equipment.
Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
7301.1
Data sheet
Density
0,82
VOC
820 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum CombiColor Original is the ultimate direct to metal paint, providing years of protection in minutes:
Apply to bare, manually derusted or ready primed mild steel
Over 400 colour options including RAL, BS & NCS
Primer and metal topcoat in one
Interior/exterior use
Sag resistant - leaves no brush/roller strokes
Use...
Rust-Oleum 7302 CombiColor Hammertone Thinner is a special thinner for Rust-Oleum CombiColor 7300/7302 Hammertone. Although thinning of Hammertone is not necessary for spraying, if required it is advised to use this thinner. Also ideal for cleaning/degreasing of surfaces.
Easy to pour
Reclosable packaging
Special for CombiColor Original...
Jotun Thinner No. 17 is a paint thinner designed to improve the flow of a range of Jotun epoxy products. It can also be used as cleaner of pumps and tools after and before painting.
Jotun Thinner No. 17 is specially suitable as a thinner for epoxies and similar type products except Tankguard series.
A specially formulated blend of solvents designed to mix with its compatible paint/coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. 109 Tool Cleaner can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes,...
Sherwin-Williams Cleanser/Thinner No.2 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
International Thinner/Equipment Cleaner GTA123 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 633 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as...
Tor Cleaning Solvent (TH0) is a blend of dimethyly adipate, dimethyl glutarate and dimethyl succinate used for cleaning of solvent based and solvent free materials from application equipment.
Thermoguard Sprayshop Lacquer Topcoat Thinners are a special blend of solvents specifically designed to dilute Thermoguard Sprayshop Lacquer Topcoat if necessary for application. Also, ideally suited for cleaning equipment or splashes after use of Thermoguard Sprayshop Lacquer Topcoat.
International Thinner/Equipment Cleaner GTA991 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistency for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 190N can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such...
A specially formulated blend of solvents designed to mix with its compatible Teamac or Coo-Var coating to create an optimal consistancy for application.
Suitable for use with Brush, Roller or Spray.
Teamac Thinner 14 can also be used for the cleaning of some surfaces prior to application of the coating.
Also suitable for the cleaning of...
