Alternatively you can email our sales & support team on [email protected]
Rust-Oleum Thinner 633
633.1
A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 633 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes, Rollers and Spray Equipment.
Rust-Oleum Thinner 633 is a specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Rust-Oleum Thinner 633 can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as Brushes, Rollers and Spray Equipment.
Please read all relevant data sheets on this thinner and the coating you are intending to use it with to check for compatibility, volume ratios and application suggestions. If you are unsure please contact our Technical Team on 0113 2455450.
For a guide to some of the products diluted by this thinner see below:
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum 7500 Alkythane is a single pack high performance, anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C) it offers the same protection in less layers than other alkyd-systems.
Available in 400+ colours
Excellent opacity and corrosion protection
Easy to apply, excellent flow and aspect
Extra durable...
Rust-Oleum 1060/1080 High Build Metal Primer is for extra protection of bare or blasted metal, offers maximum durability under severely corrosive conditions. It assures appropriate protection under light industrial exposure conditions, if applied on a Rust-Oleum metal primer followed by Rust-Oleum 7500 Alkythane.
Protects up to C4 corrosion...
Rust-Oleum 769/780 Damp-Proof Rust Primer is a single pack rust primer for direct application on slightly moist or dry metal surfaces. It is specially developed to be applied on hand tool prepared sound rusted steel surfaces.
Rust-Oleum 569/580 Quick Drying Metal Primer is a single pack quick drying metal primer for bare and lightly rusted metal. It should be used on new, blasted or slightly rusted steel surfaces. Depending on the exposure conditions, it can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection.
Recoatable in just...
Bradite TW35 Conventional Thinner is a high flash point aliphatic solvent for thinning alkyd based paints and equipment cleaning. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
Key Properties
Density: 0.78 kg/L
Flash Point: 38°C
VOC: 775 g/L
Type: Conventional Thinner
Jotun Thinner No. 10 is a paint thinner designed to improve the flow of a range of Jotun polyurethane products. It can also be used as a cleaner of pumps and tools after and before painting.
Jotun Thinner No. 10 is specially suitable as a thinner for polyurethane and similar products.
Jotun Thinner No. 23 is a paint thinner designed to improve the flow of Jotun Tankguard epoxy products. It can also be used as a cleaner of pumps and tools after and before painting.
Jotun Thinner No. 23 is specially suitable as a thinner for tankguard epoxy products.
Sherwin-Williams Cleanser/Thinner No.5 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
Tor Cleaning Solvent (TH0) is a blend of dimethyly adipate, dimethyl glutarate and dimethyl succinate used for cleaning of solvent based and solvent free materials from application equipment.
Nullifire FC025 Thinner is used for Nullifire primers, basecoats or topcoats. Refer to the technical datasheet for information on what thinner is most suitable.
Sherwin-Williams Cleanser/Thinner No.15 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.
International Thinner/Equipment Cleaner GTA123 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
Sika Thinner C is a specially formulated blend of solvents designed to mix with its compatible Sika products to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Sika Thinner C can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as...
International Thinner/Equipment Cleaner GTA220 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
Jotun Thinner No. 26 is a paint thinner designed to improve the flow and solvent evaporation of Jotun polysiloxanes and cross linked acrylics. It can also be used as a cleaner of pumps and tools after and before painting.
Tor Epoxy Thinners for the thinning (where necessary) of Tor Two Pack epoxy based materials and for cleaning of the same materials from application equipment. A blend of Xylene and Glycol Ether.
