HMG Thinner 2603

    TNR2603
    HMG4486

    HMG Thinner 2603 is a medium slow thinner.

    • For use with compatible HMG systems.

    Size
    £38.22(ex. VAT)
    £45.86 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    HMG Thinner 2603 is a medium slow thinner.



    Click To Jump To Section:




    Features & Benefits


    • For use with compatible HMG systems.

    Suitable for use with the following HMG products:



    Product Specification


    Technical Data
    HMG Thinner 2603
    Volume Solids:0.0%
    VOC Content:0.920kgs/ltr
    SG:-
    Viscosity:Not determined
    Density:0.926 g/cm³
    Storage Conditions:Store between 5°C - 25°C. When not in use, cans must be kept sealed.
    Shelf Life:12 months from delivery date in original sealed containers.
    Flash Point:41°C



    Surface Preparation


    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
    • Read and follow the safety data sheet, product data sheet and label instructions.
    • Stir all paints thoroughly before use.
    • Always use the same batch number on the same job.
    • Check colour & sheen.
    • Filter the product immediately before use.
    • Reduce emissions and maintain quality by replacing tin lid after use.



    Product Notes


    Information On Basic Physical And Chemical Properties
    HMG Thinner 2603
    Form:According to product specification
    Colour:According to product specification
    Odour:Characteristic
    Odour Threshold:Not determined
    pH-value 20°C:Not determined
    Melting point/freezing point:Undetermined
    Initial boiling point and boiling range:145°C
    Flash Point:41°C
    Flammability (solid, gas):Not applicable
    Ignition temperature:315°C
    Decomposition temperature:Not determined.
    Auto-ignition temperature:Product is not selfigniting.
    Explosive properties:"Product is not explosive. However, formation of explosive air vapour mixtures are possible."
    Explosion limits: Lower:0.7 Vol %
    Explosion limits: Upper:10.8 Vol %
    Vapour pressure at 20°C:5 hPa
    Density at 20°C:0.926 g/cm³
    Relative density:Not determined
    Vapour density:Not determined
    Evaporation rate:Not determined
    Solubility in / Miscibility with water:Fully miscible
    Partition coefficient: n-octanol/water:Not determined
    Viscosity: Dynamic at 20°C:Not determined
    Viscosity: Kinematic:Not determined
    Solvent content: Organic solvents:100.0%
    Solids content:0.0%



    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use.

    Click to go back to the top of the page

    Product Details
    4486-705417

    Data sheet

    Manufacturer
    HMG Paints Limited
    Density
    0.926 g/cm³
    Solids by Volume
    0.0%
    VOC
    0.920kgs/ltr
    Shelf Life (from date of manufacture)
    12 months from delivery date in original sealed containers.
    Size
    5L
    UN Number
    1263
    Product Usage Type
    Thinner
    Categorised As
    Accessories > Thinners
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG Thinner 2603 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    HMG Acrythane XSC21

    HMG Acrythane XSC21 (Base) is a premium quality, high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acrythane XSC21Hardener (Part 2) HMG...

    In stock

    HMG Acrythane XSC21 Clear

    HMG Acrythane XSC21 Clear is a premium quality, high solids 2K Acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acrythane XSC21 ClearHardener (Part 2)...

    In stock

    HMG Acrythane SC601 Colours

    HMG Acrythane SC601 Colours (Base) is a standard high solids 2K acrylic cured with isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acrythane SC601 ColoursActivator (Part 2)...

    Price £21.97 (ex. VAT)
    In Stock and Available for Delivery

    HMG Acrythane XSC98 11

    HMG Acrythane XSC98 11 (Base) is an ultra high solids (UHS) compliant coating. It is 2K acrylic cured with an isocyanate hardener with outstanding properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acrythane XSC98 11...

    Price £29.28 (ex. VAT)
    In Stock and Available for Delivery

    HMG Superthane

    HMG Superthane is a 2K high build, polyurethane coating offering the ultimate levels of chemical resistance, graffiti resistance and superb durability. Superthane has been tested against a wide variety of substances to demonstrate its superb chemical resistance properties. This product MUST be purchased/used in conjuction with its...

    Price £42.24 (ex. VAT)
    In Stock and Available for Delivery

    HMG Monothane 2K

    HMG Monothane 2K Topcoat (Base) is a twin-pack, single coat, direct to surface gloss primer, giving excellent adhesion and corrosion protection for most clean and degreased metal substrates and many plastics. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System...

    Price £66.00 (ex. VAT)
    In Stock and Available for Delivery

    HMG Speedbuild 3 Primer

    HMG Speedbuild 3 Primer is a 1K, high build, high solids, anti-corrosive primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner:2-Pack System DetailsBase (Part 1) HMG Speedbuild 3 PrimerThinner (Part 2) HMG Thinner 2601HMG Thinner 2602HMG...

    Price £55.20 (ex. VAT)
    In Stock and Available for Delivery

    HMG Polykote 2K AMC Primer

    HMG Polykote 2K AMC Primer is a 2K isocyanate cured `wet on wet` acrylic polyurethane primer/surfacer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Polykote 2K AMC PrimerHardener (Part 2) HMG Hardener 9004 Standard...

    Price £110.38 (ex. VAT)
    In Stock and Available for Delivery

    HMG Polykote 2K TAP Primer

    HMG Polykote 2K TAP Primer (Base) is a transparent 2K adhesion promoter /primer / sealer. It is designed for use on sound OEM finishes when minimum sanding is required and has the additional benefit of being used as a `wet on wet` primer to optimise process times. This product MUST be purchased/used in conjuction with its manufacturer...

    Price £116.75 (ex. VAT)
    In Stock and Available for Delivery

    HMG Polykote 2K MU Primer

    HMG Polykote 2K MU Primer (Base) is a 2K isocyanate cured acrylic polyurethane primer/surfacer offering high film build, excellent adhesion and anti corrosive properties. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner:3-Pack System DetailsBase (Part 1) HMG...

    Price £80.96 (ex. VAT)
    In Stock and Available for Delivery