HMG Thinner 2621

    TNR2621
    HMG4494

    HMG Thinner 2621 is a thinner for use in various applications.

    • For use with compatible HMG systems.

    Size
    £10.70(ex. VAT)
    £12.84 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    HMG Thinner 2621 is a thinner for use in various applications.



    Click To Jump To Section:




    Features & Benefits


    • For use with compatible HMG systems.

    Suitable for use with the following HMG products:



    Product Specification


    Technical Data
    HMG Thinner 2621
    Volume Solids:0.0%
    VOC Content:0.780kgs/ltr
    SG:-
    Viscosity:Not determined
    Density:0.868 g/cm³
    Storage Conditions:Store between 5°C - 25°C. When not in use, cans must be kept sealed.
    Shelf Life:12 months from delivery date in original sealed containers.
    Flash Point:24°C



    Surface Preparation


    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
    • Read and follow the safety data sheet, product data sheet and label instructions.
    • Stir all paints thoroughly before use.
    • Always use the same batch number on the same job.
    • Check colour & sheen.
    • Filter the product immediately before use.
    • Reduce emissions and maintain quality by replacing tin lid after use.



    Product Notes


    Information On Basic Physical And Chemical Properties
    HMG Thinner 2621
    Form:According to product specification
    Colour:According to product specification
    Odour:Characteristic
    Odour Threshold:Not determined
    pH-value 20°C:Not determined
    Melting point/freezing point:-95°C
    Initial boiling point and boiling range:137°C
    Flash Point:24°C
    Flammability (solid, gas):Not applicable
    Ignition temperature:430°C
    Decomposition temperature:Not determined.
    Auto-ignition temperature:Product is not selfigniting.
    Explosive properties:"Product is not explosive. However, formation of explosive air vapour mixtures are possible."
    Explosion limits: Lower:1 Vol %
    Explosion limits: Upper:7.8 Vol %
    Vapour pressure at 20°C:9.5 hPa
    Density at 20°C:0.868 g/cm³
    Relative density:Not determined
    Vapour density:Not determined
    Evaporation rate:Not determined
    Solubility in / Miscibility with water:NOT MISCIBLE
    Partition coefficient: n-octanol/water:Not determined
    Viscosity: Dynamic at 20°C:Not determined
    Viscosity: Kinematic:Not determined
    Solvent content: Organic solvents:100.0%
    Solids content:0.0%



    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use.

    Click to go back to the top of the page

    Product Details
    4494-705425

    Data sheet

    Manufacturer
    HMG Paints Limited
    Density
    0.868 g/cm³
    Solids by Volume
    0.0%
    VOC
    0.780kgs/ltr
    Shelf Life (from date of manufacture)
    12 months from delivery date in original sealed containers.
    Size
    1L, 5L & 25L
    UN Number
    1263
    Product Usage Type
    Thinner
    Categorised As
    Accessories > Thinners
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG Thinner 2621 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    HMG QAD Enamel

    HMG QAD Enamel is an industrial, durable, high gloss, tough alkyd for use on spray applied steel, railings, exterior furniture and fencing plus other suitable prepared metals.Quick drying - touch dry in 30 minutes Coverage: 11-12m² per litre at 20 microns dft, 10-12 m² per litre at 55 microns dft Can be applied to mild, galvanised and...

    Price £16.48 (ex. VAT)
    In Stock and Available for Delivery

    HMG Chlorinated Rubber

    HMG Chlorinated Rubber is a versatile, high build, easy to apply, single pack chlorinated rubber based paint.  It gives excellent durability combined with good resistance to acids, alkalis and oxidising agents in aqueous and gaseous forms.Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours Versatile High...

    Price £30.91 (ex. VAT)
    In Stock and Available for Delivery

    HMG AR141 Matt Black

    HMG AR141 Matt Black is an air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300ºC.The full physical properties are achieved after baking at temperatures above 220ºC (at this temperature the free silicones in the system auto cross link) At temperatures of up to 300ºC...

    Price £107.79 (ex. VAT)
    In Stock and Available for Delivery

    HMG HB05 Primer

    HMG HB05 Primer is an alkyd based, high build primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified zinc phosphate.Designed for airless or conventional application for structural steelwork, chassis, steel fabrication etc. It is easy to apply without fear of runs or sags at...

    Price £42.29 (ex. VAT)
    In Stock and Available for Delivery

    HMG HB48 Primer

    HMG HB48 Primer is an alkyd based, quick drying primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified Zinc Phosphate.Suitable for structural steelwork, chassis, steel fabrication, mild steel, shot blasted steel, aluminium & galvanised steel Easy to apply without fear of...

    Price £37.73 (ex. VAT)
    In Stock and Available for Delivery

    HMG SPS70 Primer Finish

    HMG SPS70 Primer Finish is a quick drying, durable, anti-corrosive, single protection system providing hard wearing, tough matt, semi-gloss or full gloss finish - Keeps equipment looking new for longer. Application direct to metal with wet-on-wet application. For professional use Quick-drying - touch dry in 30 mins, hard dry after 6...

    Price £17.60 (ex. VAT)
    In Stock and Available for Delivery

    HMG SPS30 Primer Finish

    HMG SPS30 Primer Finish is a quick drying SPS (Single Protection System) single coat finish offering excellent performance.Provided with a sheen level of 30% finish Hard dry in as little as 60 minutes at 20℃Touch dry in 30 mins at 20℃Coverage up to 8-10m2 per litre Flashpoint: 24℃ Available in 5,000+ colours from RAL, NCS, and...

    Price £47.36 (ex. VAT)
    In Stock and Available for Delivery

    HMG SPS Primer Finish Gloss

    HMG SPS Primer Finish Gloss is a quick drying SPS, durable, anti-corrosive, single protection system providing hard wearing, tough gloss finish. Application direct to metal with wet-on-wet application. Keeps equipment looking new for longer.For professional use Quick drying - touch dry in 30 mins at 20°C, hard dry in 6 hours at 20°C...

    Price £49.28 (ex. VAT)
    In Stock and Available for Delivery

    HMG High Build Vinyl Primer Finish

    HMG High Build Vinyl Primer Finish is a high build anti corrosive vinyl primer finish.Excellent adhesion Corrosion protection to mild steel, aluminium, stainless steel and galvanised substrates Available in 5,000+ colours from RAL, NCS, and British Standard Also available as an aerosol, please see HMG High Build Vinyl Primer Finish...

    Price £66.59 (ex. VAT)
    In Stock and Available for Delivery