HMG Thinner 2631


    HMG Thinner 2631 is a hydrocarbon-free thinner.

    • For use with compatible HMG systems.

    £36.01(ex. VAT)
    £43.21 (inc. VAT)
    Please choose your colour
    Available for Delivery (See Delivery Options Below)


    HMG Thinner 2631 is a hydrocarbon-free thinner.

    Click To Jump To Section:

    Features & Benefits

    • For use with compatible HMG systems.

    For use with the following HMG products:

    Product Specification

    Technical Data
    HMG Thinner 2631
    Volume Solids:0.0%
    VOC Content:0.815kgs/ltr
    Viscosity:Not determined
    Density:0.807 g/cm³
    Storage Conditions:Store between 5°C - 25°C. When not in use, cans must be kept sealed.
    Shelf Life:12 months from delivery date in original sealed containers.
    Flash Point:-18°C

    Surface Preparation

    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
    • Read and follow the safety data sheet, product data sheet and label instructions.
    • Stir all paints thoroughly before use.
    • Always use the same batch number on the same job.
    • Check colour & sheen.
    • Filter the product immediately before use.
    • Reduce emissions and maintain quality by replacing tin lid after use.

    Product Notes

    Information On Basic Physical And Chemical Properties
    HMG Thinner 2631
    Form:According to product specification
    Colour:According to product specification
    Odour Threshold:Not determined
    pH-value 20°C:Not determined
    Melting point/freezing point:Undetermined
    Initial boiling point and boiling range:56°C
    Flash Point:-18°C
    Flammability (solid, gas):Not applicable
    Ignition temperature:370°C
    Decomposition temperature:Not determined.
    Auto-ignition temperature:Product is not selfigniting.
    Explosive properties:"Product is not explosive. However, formation of explosive air vapour mixtures are possible."
    Explosion limits: Lower:2 Vol %
    Explosion limits: Upper:15 Vol %
    Vapour pressure at 20°C:233hPa
    Density at 20°C:0.807g/cm³
    Relative density:Not determined
    Vapour density:Not determined
    Evaporation rate:Not determined
    Solubility in / Miscibility with water:NOT MISCIBLE
    Partition coefficient: n-octanol/water:Not determined
    Viscosity: Dynamic at 20°C:Not determined
    Viscosity: Kinematic:Not determined
    Solvent content: Organic solvents:99.7% - Water: 0.3%
    Solids content:0.0%

    Health & Safety

    • Refer to the safety data sheet in the attachments section above and tin label prior to use.

    Click to go back to the top of the page

    Product Details

    Data sheet

    HMG Paints Limited
    0.807 g/cm³
    Solids by Volume
    Shelf Life (from date of manufacture)
    12 months from delivery date in original sealed containers.
    5L & 25L
    UN Number
    Base Type
    Product Type
    Categorised As
    Accessories > Thinners

    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

    Be the first to ask a question about this product!

    Question about the product

    * Required fields


    HMG Thinner 2631 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT

    You might also like

    HMG Pre Cat Primefast 2014-04

    HMG Pre Cat Primefast 2014-04 is a high solids, 1K MDF primer.Fast drying Superb filling properties Ease of application Excellent sandabilityMore Information Delivery Info

    Price £48.02 (ex. VAT)
    In Stock and Available for Delivery

    HMG DG282 14 MDF Sealer

    HMG DG282 14 MDF Sealer (Base) is a high solids, fast drying MDF primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG DG282 14 MDF SealerHardener (Part 2) HMG Acid Cat 91 HardenerOne part of a two part...

    Price £219.56 (ex. VAT)
    In Stock and Available for Delivery