HMG Thinner 2622

    TNR2622
    HMG4498

    HMG Thinner 2622 is a slow thinner.

    • For use with compatible HMG systems.

    Size
    £38.05(ex. VAT)
    £45.66 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    HMG Thinner 2622 is a slow thinner.



    Click To Jump To Section:




    Features & Benefits


    • For use with compatible HMG systems.

    For use with the following HMG products:



    Product Specification


    Technical Data
    HMG Thinner 2622
    Volume Solids:0.0%
    VOC Content:0.860kgs/ltr
    SG:-
    Viscosity:Not determined
    Density:0.807 g/cm³
    Storage Conditions:Store between 5°C - 25°C. When not in use, cans must be kept sealed.
    Shelf Life:12 months from delivery date in original sealed containers.
    Flash Point:>35°C



    Surface Preparation


    • Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
    • Read and follow the safety data sheet, product data sheet and label instructions.
    • Stir all paints thoroughly before use.
    • Always use the same batch number on the same job.
    • Check colour & sheen.
    • Filter the product immediately before use.
    • Reduce emissions and maintain quality by replacing tin lid after use.



    Product Notes


    Information On Basic Physical And Chemical Properties
    HMG Thinner 2622
    Form:According to product specification
    Colour:According to product specification
    Odour:Characteristic
    Odour Threshold:Not determined
    pH-value 20°C:Not determined
    Melting point/freezing point:-50°C
    Initial boiling point and boiling range:140°C
    Flash Point:>35°C
    Flammability (solid, gas):Not applicable
    Ignition temperature:>400°C
    Decomposition temperature:Not determined.
    Auto-ignition temperature:Product is not selfigniting.
    Explosive properties:"Product is not explosive. However, formation of explosive air vapour mixtures are possible."
    Explosion limits: Lower:0.7 Vol %
    Explosion limits: Upper:7.5 Vol %
    Vapour pressure at 20°C:5 hPa
    Density at 20°C:0.867g/cm³
    Relative density:Not determined
    Vapour density:Not determined
    Evaporation rate:Not determined
    Solubility in / Miscibility with water:0.05 g/l
    Partition coefficient: n-octanol/water:Not determined
    Viscosity: Dynamic at 20°C:Not determined
    Viscosity: Kinematic:0.7 mm²/s
    Solvent content: Organic solvents:100.0%
    Solids content:0.0%



    Health & Safety


    • Refer to the safety data sheet in the attachments section above and tin label prior to use.

    Click to go back to the top of the page

    Product Details
    4498-705432

    Data sheet

    Manufacturer
    HMG Paints Limited
    Density
    0.807 g/cm³
    Solids by Volume
    0.0%
    VOC
    0.860kgs/ltr
    Shelf Life (from date of manufacture)
    12 months from delivery date in original sealed containers.
    Size
    5L
    UN Number
    1263
    Product Usage Type
    Thinner
    Categorised As
    Accessories > Thinners
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HMG Thinner 2622 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    HMG QAD Enamel

    HMG QAD Enamel is an industrial, durable, high gloss, tough alkyd for use on spray applied steel, railings, exterior furniture and fencing plus other suitable prepared metals.Quick drying - touch dry in 30 minutes Coverage: 11-12m² per litre at 20 microns dft, 10-12 m² per litre at 55 microns dft Can be applied to mild, galvanised and...

    Price £16.48 (ex. VAT)
    In Stock and Available for Delivery

    HMG Chlorinated Rubber

    HMG Chlorinated Rubber is a versatile, high build, easy to apply, single pack chlorinated rubber based paint.  It gives excellent durability combined with good resistance to acids, alkalis and oxidising agents in aqueous and gaseous forms.Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours Versatile High...

    Price £30.91 (ex. VAT)
    In Stock and Available for Delivery