Coo-Var P101 Anti-Graffiti Brushwash and Thinner

Remmers Thinner V 103

Remmers V 103 Thinner is a solvent mixture of aromatic hydrocarbons and alcohols used as a universal solvent for thinning and cleaning. Ideal for thinning and dissolving not yet reacted reactive resin products, especially Remmers Epoxy Universal. Because of the alcohols it contains, V 103 Thinner is not suitable for thinning polyurethane coatings (e.g....

Bradite TX31 Quick Thinner

Bradite TX31 Quick Thinner is a low flash point aromatic solvent for thinning quick drying alkyd based paints and equipment cleaning. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.   Key Properties Density: 0.86 kg/L Flash Point: 25°C VOC: 860 g/L Type: Quick Thinner

Carboline Thinner 31

Carboline Thinner 31 is a thinner for use in industrial coatings.

Carboline Thinner 214

Carboline Thinner 214 is a thinner for use in industrial coatings.

PPG Thinner 90-53

This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.

Tor Standard Urethane Thinners

Tor Standard Urethane Thinners (TH99) is a blend of Xylene and Methoxy Propyl Acetate for the thinning (where necessary) of Tor Two pack and Moisture Cure Urethanes and for cleaning of the same materials from application equipment.

Carboline Thinner 26

Carboline Thinner 26 is a thinner for use in industrial coatings.

Cromadex 06-55 Equipment Cleaner

Nullifire FC025 Thinner

Nullifire FC025 Thinner is used for Nullifire primers, basecoats or topcoats. Refer to the technical datasheet for information on what thinner is most suitable.

Carboline Thinner 76

Carboline Thinner 76 thinner for use in industrial coatings.

Sherwin-Williams Cleanser/Thinner No.4

Sherwin-Williams Cleanser/Thinner No.4 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.

Nullifire FC215 Thinner

Nullifire FC215 Thinner is used in conjunction with certain Nullifire intumescent coatings. Please refer to the relevant datasheet for additional information.

Sherwin-Williams Cleanser/Thinner No.13

Sherwin-Williams Cleanser/Thinner No.13 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment.

International Thinner/Equipment Cleaner GTA803

International Thinner/Equipment Cleaner GTA803 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.

906 Thinner

A specially formulated blend of solvents designed to mix with 902 HD Cladding Paint and 902M HD Cladding Paint when using the products in warm conditions as a substitute for 905 Thinner to create an optimal consistancy for application whether it be for Brush, Roller or Spray.

Bradite TP33 Polyurethane Thinner

Bradite TP33 Polyurethane Thinner is a high flash point solvent for thinning two pack polyurethane paints and equipment cleaning. Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.   Key Properties Density: 0.960 kg/L Flash Point: 42°C VOC: 960 g/L Type: Polyurethane