HATE Adhesion Tester

    Hate1227

    We no longer offer this product; for information and advice on supply of this product and its associated certificates, please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to help.

    One of the most accurate and versatile adhesion testers currently available, the HATE Adhesion Tester measures the adhesion bond strength of applied coatings with ease and precision.

    • Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu below
    • Supplied in an industrial foam-filled Carrying Case with 5 Flat Dollies, Adhesive, Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug
    • Compliant with ISO 4624, ISO 16276-1 and ASTM D4541
    • Available in Standard (X1003) and Right Angle (X1004) options - choose from the drop-down menu below

    Quantity
    Product not available
    This Product has been Discontinued

    Description

    The Adhesion Tester is one of the most accurate and versatile adhesion testers currently available. It measures the adhesion bond strength of applied coatings with ease and precision.

    Compliant with ISO standards ISO 4624, ISO 16276-1 and ASTM D4541.

    The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the centre of the Dolly by a hydraulically loaded pin. This ensures an exactly central point-loading of the force.

    The maximum value achieved at pull-off is recorded by a reset needle that is easily read on the large scale of the pressure gauge.

    Ensures effective quality control with a non-destructive capability. To allow the specification minimum to be proven, the dolly can be removed using the heated dolly remover supplied. If necessary, the dolly can be left in place for testing during service as part of a planned maintenance programme.

    Supplied in an industrial foam-filled Carrying Case with 5 Flat Dollies, Adhesive, Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug.

    The Right Angle version of the Adhesion Tester enables the user to test the adhesion of coatings inside pipes with a minimum diameter of 150mm (6”).

    Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu above.

    Concave and Convex Dollies are available as an optional extra in various sizes for the Adhesion Tester* for testing external and internal surfaces of the pipes respectively - choose from the drop-down menu above.

    *Please note: Convex Dollies of 20″ and below are only suitable for use with the X1004 Right Angle Adhesion Tester



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • One of the most accurate and versatile adhesion testers currently available
    • Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu above
    • Supplied in an industrial foam-filled Carrying Case with 5 Flat Dollies, Adhesive, Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug
    • Compliant with ISO 4624, ISO 16276-1 and ASTM D4541
    • Spares for use with the Adhesion Tester are also available from the drop-down menu below 
    • Concave and Convex Dollies are available as an optional extra in various sizes for the Adhesion Tester* for testing external and internal surfaces of the pipes respectively - choose from the drop-down menu below
      • Please note: Convex Dollies of 20″ and below are only suitable for use with the X1004 Right Angle Adhesion Tester



    Specification


    Pressure Gauge resolution:

    • psi 20, Mpa 0.2

    Accuracy:

    • ±1%FSD



    ISO Information


    ISO 4624:

    • Paints and varnishes
    • Pull-off test for adhesion

    ISO 16276-1:

    • Corrosion protection of steel structures by protective paint systems
    • Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating
    • Part 1: Pull-off testing



    Safety


    When using the cyanoacrylate Adhesive – ensure the work area is well ventilated, wear gloves and do not let any Adhesive come into contact with your skin.

    When using the Dolly Remover – do not touch the elements or heads after switching on. Allow approximately 15 minutes for the elements and heads to cool to ambient temperature after switching off.



    Order References


     Adhesion Tester options and spares:

    Order CodeItem/Size
    X1003Adhesion Tester (Standard) 0–3500psi (0–25MPa)
    X1004Adhesion Tester (Right angle) 0–3500psi (0–25MPa)
    NX001Adhesion Tester Calibration Certificate
    XS101Spare Flat Dolly
    XS102Spare Turbo Fuse Adhesive
    XS103Spare Dolly Plug (pack of 5)



    Concave Dollies:

    The Adhesion Tester can test external surfaces of pipes. Because the load reacts internally within the dolly, curved surfaces of pipes can be easily tested.

    The Dollies are manufactured in stainless steel and are designed to be cleaned and reused.

    Select the nearest Dolly size to suit your pipe diameter.  Use the Flat Dolly for a pipe radius of 42″ and over.

    Order CodeItem/Size
    XA201Concave Dolly 2″ (51mm)
    XA202Concave Dolly 3″ (76mm)
    XA203Concave Dolly 4″ (102mm)
    XA204Concave Dolly 6″ (152mm)
    XA205Concave Dolly 8″ (203mm)
    XA206Concave Dolly 10″ (254mm)
    XA207Concave Dolly 12″ (305mm)
    XA208Concave Dolly 14″ (356mm)
    XA209Concave Dolly 16″ (406mm)
    XA210Concave Dolly 18″ (457mm)
    XA211Concave Dolly 20″ (508mm)
    XA212Concave Dolly 24″ (610mm)
    XA213Concave Dolly 30″ (762mm)
    XA214Concave Dolly 36″ (914mm)



    Convex Dollies:

    The Adhesion Tester can test internal surfaces of pipes. Because the load reacts internally within the dolly, curved surfaces of pipes can be easily tested.

    The Dollies are manufactured in stainless steel and are designed to be cleaned and reused.

    Please Note: Convex Dollies of 20″ and below are only suitable for use with the X1004 Right Angle Adhesion Tester.

    Select the nearest Dolly size to suit your pipe diameter.  Use the Flat Dolly for a pipe radius of 42″ and over.

    Order CodeItem/Size
    XA215Convex Dolly 6″ (152mm)
    XA216Convex Dolly 8″ (203mm)
    XA217Convex Dolly 10″ (254mm)
    XA218Convex Dolly 12″ (305mm)
    XA219Convex Dolly 14″ (356mm)
    XA220Convex Dolly 16″ (406mm)
    XA221Convex Dolly 18″ (457mm)
    XA222Convex Dolly 20″ (508mm)
    XA223Convex Dolly 24″ (610mm)
    XA224Convex Dolly 30″ (762mm)
    XA225Convex Dolly 36″ (914mm)
    Product Details
    Hate1227

    Data sheet

    Manufacturer
    Rawlins Testing Equipment
    For Use By
    Consumer Use
    Single, Two or Three Pack
    Single
    Suitable For Use On
    Pipes
    Product Usage Type
    Tools & Accessories
    Product Category
    Testing Equipment
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    HATE Adhesion Tester is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT