HATE Adhesion Tester

Hate1227

One of the most accurate and versatile adhesion testers currently available, the HATE Adhesion Tester measures the adhesion bond strength of applied coatings with ease and precision.

  • Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu below
  • Supplied in an industrial foam-filled Carrying Case with 5 Flat Dollies, Adhesive, Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug
  • Compliant with ISO 4624, ISO 16276-1 and ASTM D4541
  • Available in Standard (X1003) and Right Angle (X1004) options - choose from the drop-down menu below
  • Spares for use with the Adhesion Tester are also available from the drop-down menu below 
  • Concave and Convex Dollies are available as an optional extra in various sizes for the Adhesion Tester* for testing external and internal surfaces of the pipes respectively - choose from the drop-down menu below

*Please note: Convex Dollies of 20″ and below are only suitable for use with the X1004 Right Angle Adhesion Tester

Item
£1,269.10
£1,522.92 Incl. VAT
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

The Adhesion Tester is one of the most accurate and versatile adhesion testers currently available. It measures the adhesion bond strength of applied coatings with ease and precision.

Compliant with ISO standards ISO 4624, ISO 16276-1 and ASTM D4541.

The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the centre of the Dolly by a hydraulically loaded pin. This ensures an exactly central point-loading of the force.

The maximum value achieved at pull-off is recorded by a reset needle that is easily read on the large scale of the pressure gauge.

Ensures effective quality control with a non-destructive capability. To allow the specification minimum to be proven, the dolly can be removed using the heated dolly remover supplied. If necessary, the dolly can be left in place for testing during service as part of a planned maintenance programme.

Supplied in an industrial foam-filled Carrying Case with 5 Flat Dollies, Adhesive, Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug.

The Right Angle version of the Adhesion Tester enables the user to test the adhesion of coatings inside pipes with a minimum diameter of 150mm (6”).

Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu above.

Concave and Convex Dollies are available as an optional extra in various sizes for the Adhesion Tester* for testing external and internal surfaces of the pipes respectively - choose from the drop-down menu above.

*Please note: Convex Dollies of 20″ and below are only suitable for use with the X1004 Right Angle Adhesion Tester



Quick Links - Click To Jump To Section:




Features & Benefits


  • One of the most accurate and versatile adhesion testers currently available
  • Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu above
  • Supplied in an industrial foam-filled Carrying Case with 5 Flat Dollies, Adhesive, Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug
  • Compliant with ISO 4624, ISO 16276-1 and ASTM D4541



Specification


Pressure Gauge resolution:

  • psi 20, Mpa 0.2

Accuracy:

  • ±1%FSD



ISO Information


ISO 4624:

  • Paints and varnishes
  • Pull-off test for adhesion

ISO 16276-1:

  • Corrosion protection of steel structures by protective paint systems
  • Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating
  • Part 1: Pull-off testing



Safety


When using the cyanoacrylate Adhesive – ensure the work area is well ventilated, wear gloves and do not let any Adhesive come into contact with your skin.

When using the Dolly Remover – do not touch the elements or heads after switching on. Allow approximately 15 minutes for the elements and heads to cool to ambient temperature after switching off.



Order References


 Adhesion Tester options and spares:

Order Code Item/Size
X1003 Adhesion Tester (Standard) 0–3500psi (0–25MPa)
X1004 Adhesion Tester (Right angle) 0–3500psi (0–25MPa)
NX001 Adhesion Tester Calibration Certificate
XS101 Spare Flat Dolly
XS102 Spare Turbo Fuse Adhesive
XS103 Spare Dolly Plug (pack of 5)



Concave Dollies:

The Adhesion Tester can test external surfaces of pipes. Because the load reacts internally within the dolly, curved surfaces of pipes can be easily tested.

The Dollies are manufactured in stainless steel and are designed to be cleaned and reused.

Select the nearest Dolly size to suit your pipe diameter.  Use the Flat Dolly for a pipe radius of 42″ and over.

Order Code Item/Size
XA201 Concave Dolly 2″ (51mm)
XA202 Concave Dolly 3″ (76mm)
XA203 Concave Dolly 4″ (102mm)
XA204 Concave Dolly 6″ (152mm)
XA205 Concave Dolly 8″ (203mm)
XA206 Concave Dolly 10″ (254mm)
XA207 Concave Dolly 12″ (305mm)
XA208 Concave Dolly 14″ (356mm)
XA209 Concave Dolly 16″ (406mm)
XA210 Concave Dolly 18″ (457mm)
XA211 Concave Dolly 20″ (508mm)
XA212 Concave Dolly 24″ (610mm)
XA213 Concave Dolly 30″ (762mm)
XA214 Concave Dolly 36″ (914mm)



Convex Dollies:

The Adhesion Tester can test internal surfaces of pipes. Because the load reacts internally within the dolly, curved surfaces of pipes can be easily tested.

The Dollies are manufactured in stainless steel and are designed to be cleaned and reused.

Please Note: Convex Dollies of 20″ and below are only suitable for use with the X1004 Right Angle Adhesion Tester.

Select the nearest Dolly size to suit your pipe diameter.  Use the Flat Dolly for a pipe radius of 42″ and over.

Order Code Item/Size
XA215 Convex Dolly 6″ (152mm)
XA216 Convex Dolly 8″ (203mm)
XA217 Convex Dolly 10″ (254mm)
XA218 Convex Dolly 12″ (305mm)
XA219 Convex Dolly 14″ (356mm)
XA220 Convex Dolly 16″ (406mm)
XA221 Convex Dolly 18″ (457mm)
XA222 Convex Dolly 20″ (508mm)
XA223 Convex Dolly 24″ (610mm)
XA224 Convex Dolly 30″ (762mm)
XA225 Convex Dolly 36″ (914mm)
Product Details
Hate1227

Data sheet

Manufacturer
Rawlins Testing Equipment
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send