- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (ex. VAT) £0.00
Holiday Detector
We no longer offer this product; for information and advice on supply of this product and its associated certificates, please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to help.
The Holiday Detector is a DC voltage Holiday Detector for detecting pinholes and flaws in insulated coatings on conductive substrates.
Where coatings must provide an effective safeguard against corrosion, it is essential that any pinholes or flaws that will eventually lead to corrosion are detected at the earliest possible stage, preferably immediately after the coating application.
- Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu below
- Supplied in an industrial foam-filled Carrying Case with High Voltage Probe, Band Brush, 10m Earth Cable and Carry Bag
- Compliant with ISO 29601, ISO 2746, ASTM D5162, ASTM G62, NACE SP0274, NACE SP0188 and NACE SP0490
The Holiday Detector is a DC voltage Holiday Detector for detecting pinholes and flaws in insulated coatings on conductive substrates.
Where coatings must provide an effective safeguard against corrosion, it is essential that any pinholes or flaws that will eventually lead to corrosion are detected at the earliest possible stage, preferably immediately after the coating application.
The test voltage is of high impedance, enabling safe testing, and does not damage or cause burn marks to the coating.
The Holiday Detector is a compact and lightweight instrument, which can easily be carried by the operator with the supplied Carry Bag.
Compliant with ISO standards ISO 29601, ISO 2746.
Available in the following Holiday Detector models:
- S4001 - 0.5–6kV for coatings up to 1100μm
- S4002 - 1–20kV for coatings up to 3700μm
- S4003 - 1–30kV for coatings up to 8000μm
For full detailed operating instructions and test voltage calculator, please see the Product Data Sheet in the 'Data Sheets' tab above.
Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu above.
Spares for use with the Holiday Detector are available from the drop-down menu above.
A range of brushes, rolling springs and extension rods for testing porosity across a variety flat areas and pipes are also available from the drop-down menu above. For details please see Order References.
Quick Links - Click To Jump To Section:
Features & Benefits
- For detecting pinholes and flaws in insulated coatings on conductive substrates
- Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu above
- Supplied in an industrial foam-filled Carrying Case with High Voltage Probe, Band Brush, 10m Earth Cable and Carry Bag
- Compliant with ISO 29601, ISO 2746, ASTM D5162, ASTM G62, NACE SP0274, NACE SP0188 and NACE SP0490
- Available in the following Holiday Detector models:
- S4001 - 0.5–6kV for coatings up to 1100μm
- S4002 - 1–20kV for coatings up to 3700μm
- S4003 - 1–30kV for coatings up to 8000μm
- A range of brushes, rolling springs* and extension rods are also available from the drop-down menu below
- Spares for use with the Holiday Detector are available from the drop-down menu below
- *Please Note: All Rolling Springs require the SA490 Rolling Spring Connector
Specification
Resolution:
- S4001: 0.01kV
- S4002 & S4003: 0.1kV.
Accuracy:
- ±1%FSD
Voltage Type:
- DC
ISO Information
ISO 29601:
- Paints and varnishes
- Corrosion protection by protective paint systems
- Assessment of porosity in a dry film
ISO 2746:
- Vitreous and porcelain enamels
- High voltage test
Safety
Safety precautions must be strictly followed whilst using the Holiday Detector.
The Holiday Detector must be operated by responsible and trained personnel, who are in good health and do not suffer from any cardiac conditions.
The Holiday Detector must not be used in any area which could have a combustible or flammable atmosphere, as the test voltage can cause a spark and an explosion could occur.
The work under test must be located in a clearly defined area, with unauthorised personnel prohibited.
All items under test must have a secure connection to earth or ground.
Order References
Holiday Detector options and spares:
Order Code | Item/Size |
---|---|
S4001 | DC Holiday Detector 0.5–6Kv (maximum test thickness 1100µm) Inc High Voltage Handle |
S4002 | DC Holiday Detector 1–20Kv (maximum test thickness 3700µm) Inc High Voltage Handle |
S4003 | DC Holiday Detector 1–30Kv (maximum test thickness 8000µm) Inc High Voltage Handle |
NS001 | DC Holiday Detector Calibration Certificate |
SA003 | Spare Earth Cable 10m |
SA004 | Earth Cable 20m |
SS001 | Spare Band Brush |
SS002 | Spare High Voltage Handle |
Broad Brushes:
Brass-filled Brushes for the testing of coatings on large flat areas using the Holiday Detector.
All Broad Brushes come complete with the connector assembly.
Order Code | Item/Size |
---|---|
SA502 | Broad Brush 200mm (8″) |
SA503 | Broad Brush 500mm (20″) |
Circular Brushes:
Brass-filled Circular Brushes for the testing of coatings on the internal diameter of pipes using the Holiday Detector.
All Brushes come complete with the connector assembly.
Order Code | Item/Size |
---|---|
SA302 | Circular Brush & Assembly 2″ (51mm) |
SA303 | Circular Brush & Assembly 3″ (76mm) |
SA304 | Circular Brush & Assembly 4″ (102mm) |
SA306 | Circular Brush & Assembly 6″ (152mm) |
SA308 | Circular Brush & Assembly 8″ (203mm) |
SA310 | Circular Brush & Assembly 10″ (254mm) |
SA312 | Circular Brush & Assembly 12″ (305mm) |
Rolling Springs:
Phosphor Bronze Rolling Springs for the testing of coatings on the external diameter of pipes using the Holiday Detector.
Please Note: All Rolling Springs require the SA490 Rolling Spring Connector. One Rolling Spring Connector can be used on multiple Rolling Springs.
Order Code | Item/Size |
---|---|
SA404 | Rolling Spring 4″ (102mm) |
SA406 | Rolling Spring 6″ (152mm) |
SA408 | Rolling Spring 8″ (203mm) |
SA410 | Rolling Spring 10″ (254mm) |
SA412 | Rolling Spring 12″ (305mm) |
SA414 | Rolling Spring 14″ (356mm) |
SA416 | Rolling Spring 16″ (406mm) |
SA418 | Rolling Spring 18″ (457mm) |
SA420 | Rolling Spring 20″ (508mm) |
SA424 | Rolling Spring 24″ (610mm) |
SA430 | Rolling Spring 30″ (762mm) |
SA436 | Rolling Spring 36″ (914mm) |
SA442 | Rolling Spring 42″ (1067mm) |
SA448 | Rolling Spring 48″ (1219mm) |
SA490 | Rolling Spring Connector - **required with all above rolling springs** |
Extension Rods:
Insulated Extension Rods for extending the reach of the Brushes and Rolling Springs using the Holiday Detector.
Extension Rods can be connected together to make longer lengths when using Circular Brushes down long pipes.
Order Code | Item/Size |
---|---|
SA002 | Extension Rod 500mm (20″) |
SA003 | Extension Rod 1000mm (40″) |
Data sheet
- Manufacturer
- Rawlins Testing Equipment
- For Use By
- Consumer Use
- Single, Two or Three Pack
- Single
- Suitable For Use On
- Insulated Surfaces
- Product Usage Type
- Tools & Accessories
- Product Category
- Testing Equipment
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Holiday Detector is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT