We no longer offer this product; for information and advice on supply of this product and its associated certificates, please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to help.
The Bresle Test will measure water-soluble salts and corrosion products on blast-cleaned steel. These compounds are almost colourless and are localized at the lowest point of the rust pits.
Compliant with ISO 8502-6 and ISO 8502-9
Supplied in an industrial foam-filled Carrying Case with Bresle Patches (pack of 35), Conductivity Meter, 500ml Deionised Water 500ml, 5ml Syringe with Needle, Calibration Solution (14ml) Conditioning Solution (14ml) and 25ml Beaker
Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu below
Individual kit components and spares are also available from the drop-down menu below
The Bresle Test will measure water-soluble salts and corrosion products on blast-cleaned steel and measure using the Horiba Conductivity Meter. These compounds are almost colourless and are localized at the lowest point of the rust pits.
If they are not removed prior to painting, chemical reactions can result in blister formation and accumulations of rust that destroy the adhesion between the substrate and the applied protective coating.
Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu above.
Individual kit components and spares are also available from the drop-down menu above.
Measures water-soluble salts and corrosion products on blast-cleaned steel
Compliant with ISO 8502-6 and ISO 8502-9
Supplied in an industrial foam-filled Carrying Case with Bresle Patches (pack of 35), Conductivity Meter, 500ml Deionised Water 500ml, 5ml Syringe with Needle, Calibration Solution (14ml) Conditioning Solution (14ml) and 25ml Beaker
Calibration Certificate, with traceability to UKAS, can be purchased separately from the drop-down menu above
Individual kit components and spares are also available from the drop-down menu above
Specification
Conductivity Meter:
Accuracy : ±2%
Range : 0–1999µS/cm
Resolution : 1µS/cm
Storage:
Do not expose the Bresle Patches to any extremes of temperature or daylight
Operation
See the data sheet/instructions for a full operations guide in our attachments section above.
Safety
The needles on the Syringes in the Bresle Test are blunt. Care must still be taken when carrying out the test.
When using the Syringes ensure the work area is well lit, be aware of people around you and assess any hazards. Ensure the protective cap is placed over the needle after use.
If the Calibration Solution comes into contact with exposed skin, wash with water. If the Solution comes into contact with eyes, rinse the eye immediately and seek medical advice.
Order References
Brestle Test and spares:
Order Code
Item/Size
P2005
Bresle Patch Test. Includes 35 Bresle Patches
PS002
Bresle Patches (pack of 35)
PS003
Spare Deionised Water (500ml)
PS004
Spare Syringes with Needles (pack of 10)
PS005
Spare Conductivity Meter Calibration Solution (14ml)
PS006
Spare 25ml Beakers (pack of 5)
PS007
Spare Conductivity Meter Sensor Measurement Head
PS008
Spare Conductivity Meter Conditioning Solution (14ml)
NP001
Conductivity Meter Calibration Certificate
NPC01
Conductivity Meter Calibration Solution Conformance Certificate
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Bresle Patch Test is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
We no longer offer this product; for information and advice on supply of this product and its associated certificates, please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to help. The Paint Inspection Kit contains all the essential equipment needed for the...