HMG Cellulose Fluorescent Aerosol is a high quality fluorescent cellulose aerosol product for automotive and industrial use. This product is also available in non-aerosol form, please see HMG Cellulose Fluorescent.
HMG Cellulose Fluorescent Aerosol is part two of a three coat system:
HMG Cellulose Fluorescent Aerosol is a high quality fluorescent cellulose aerosol product for automotive and industrial use. This product is also available in non-aerosol form, please see HMG Cellulose Fluorescent.
HMG Cellulose Fluorescent Aerosol is part two of a three coat system:
Please Note: Not to be used in connection with 2004/42/CE
Please Note: Not to be used under SI2005:27773
Please note: Signal Green is suitable for small areas only
Additional Technical Information
The lightfastness of fluorescent pigments (all grades) is between 2 - 3 on the Blue Wool Scale (of 8)
This level of colour fastness is increased to 3-4 by over lacquering with a UVRA containing clear varnish or lacquer. For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
In all environments, Fluorescent paints will fade 5-10 times faster than conventional industrial, decorative or automotive coatings
Signal Green is suitable for small areas only
Surface Preparation
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
HMG Cellulose Fluorescent Aerosol is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
HMG Acrythane 4G Clearcoat (Base) is a high solids acrylic polyurethane coating to meet the stringent requirements of the commercial vehicle market. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:2-Pack System DetailsBase (Part 1) HMG Acrythane 4G Clearcoat...
HMG Cellulose APS Primer is a quick drying cellulose primer for use in aerosols, classic car refinish and industrial applications.Available in grey or white Also available as an aerosol, please see HMG Cellulose APS Primer AerosolMore Information Delivery Info
HMG Cellulose APS Primer Aerosol is a quick drying cellulose primer for use in aerosols, classic car refinish and industrial applications. This product is also available in non-aerosol form, please see HMG Cellulose APS Primer.400ml/16oz Aerosol Matt finish Available in grey (APS2) or white (APS1) Please note: Not to be used in...