Rust-Oleum SuperGrip Anti-Slip Spray is a fast drying spray paint containing a special anti-slip additive. Ideal for small maintenance jobs or for touch-up.
Not for use in wet areas such as bathrooms or on substrates which are regularly in contact with water.
Ideal for steps, grips and handles, hand tools, etc
Adheres to metal, wood, concrete, tile, parquet and more
Rust-Oleum SuperGrip Anti-Slip Spray is a fast drying, lead and chromate free paint that contains a special anti-slip additive. It can be applied on metal, concrete, ceramic and wood surfaces or properly prepared painted substrates. Steel should be primed with Rust-Oleum 2169/2182 Hard Hat Anti-Rust Primer. Rust-Oleum SuperGrip Anti-Slip Spray makes virtually any surface non-skid instantly, ideal for small maintenance jobs or for touch-up. Anti-Slip 2400 should be used interior/exterior in light industrial exposures where anti slip characteristics are required.
Not for use in wet areas such as bathrooms or on substrates which are regularly in contact with water.
Features & Benefits
Spray coating with non-skid particles.
Ideal for steps, grips and handles, hand tools, etc.
Adheres to metal, wood, concrete, tile, parquet and more.
For interior use and to a certain extent exterior.
To handle after 1 hour (at 20°C).
Available in transparent, black and yellow.
Technical
Gloss Level: Gloss
Propellant: Propane/Butane
Drying Time At 20°C/RH 50%
Touch dry: 20 minutes
Dry to handle: 60 minutes
Dry to recoat: after 1 hour with itself
Fully cured: 7 days
Theoretical Consumption
2,5 m² per spray can at 25 µm dry
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Product Details
61-40775
Data sheet
For Use By
General Use
For Use By
Industrial Use
For Use By
Professional Use
Interior / Exterior Use
Interior & Exterior
Water / Solvent Based
Solvent
Single, Two or Three Pack
Single
Base Type
Based on a fast drying acrylic modified short oil alkyd
Application
Spray
Dry to Handle (at 20°C)
60 Mins
Dry to Recoat (at 20°C)
after 1 hour with itself
Fully Cured (at 20°C)
7 days
Coverage
3-4m² per litre
VOC
524 - 538 g/l
Shelf Life (from date of manufacture)
3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not indirect sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Hi, what is the dry weight of the spray? i.e. if I were to spray the entire 500ML on a surface, how much weight would the surface gain once the spray dries out?
Answer from Rawlins’ Technical Team:
The manufacturer has tried to get some details but still have not been able to calculate how much weight this would add to the surface.
But to give an INDICATIVE estimate, if we sprayed 500 mls, then after solvent evaporation, we MIGHT have about 250 mls of dried paint on the surface.
If we imagined a density level of 1.0, then the resulting weight gain would be 250 gms.
But I would stress that this is a very rough estimated value
DCW on 2020-06-17 14:01:05
Question:
It says in the info "For interior use and to a certain extent exterior". I am looking for something to coat a front doorstep, painted with Rustoleum anysurface cardinal red paint. Is this a suitable product? thanks
Answer from Rawlins’ Technical Team:
This product is suitable for interior or exterior use where it will not come into regular contact with water.
Rust-Oleum Hard Hat 2169/2182 Anti-Rust Primer is to be used on new, bare or slightly rusted steel surfaces to prevent further rusting and corrosion.
Ready to recoat after just 10 minutes, to handle after 30 min.
Penetrates deeply into the surface and does not give rust a chance
Grey for light coloured topcoats and red for dark coloured...