Rust-Oleum Hard Hat 2500 Transparent Protection
A non-yellowing transparent protecting coating that can be applied over various Rust-Oleum products, old fading coatings or directly onto many surfaces like aluminium, brass, bronze, chrome, copper to provide increased durability, exterior performance, gloss level and cleanability.
Rust-Oleum Hard Hat 2500 Transparent Protection is a non-yellowing transparent protecting coating that should be applied over Rust-Oleum Hard Hat Fluorescent Topcoats, Rust-Oleum 2111 Sparkling Aluminium, Rust-Oleum 2115 Aluminium, Rust-Oleum 2116 Stainless Steel Coating to increase durability, exterior performance, gloss level and cleanability.
Rust-Oleum Hard Hat 2500 Transparent Protection can also be used to restore the gloss and life expectancy of any faded old coatings. Rust-Oleum Hard Hat 2500 Transparent Protection can also be applied directly onto many surfaces like aluminium, brass, bronze, chrome, copper, etc. Ideal for small maintenance jobs and industrial touch-up.
Features & Benefits
- Protection of copper, chrome, silver, bronze, nickel, aluminium
- Extra durability to metallic/fluorescent coatings
- Non-yellowing (UV-resistant)
- To handle after 30 minutes (at 20°C)
- Heat-resistant up to 100°C
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||3-4m² per litre|
|Touch Dry||15 Mins|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Scott on 06/01/2018|
Question: Can this be used on ral 2000 combi colour that was brushed on not sprayed
Yes, as long as CombiColor has fully dried - i.e. 7 days at 20°C/50% r.h.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close