Alternatively you can email our sales & support team on [email protected]
Rust-Oleum Hard Hat 2500 Transparent Protection
2500
Rust-Oleum Hard Hat 2500 Transparent Protection is a non-yellowing transparent protecting coating that can be applied over various Rust-Oleum products, old fading coatings or directly onto many surfaces like aluminium, brass, bronze, chrome, copper to provide increased durability, exterior performance, gloss level and cleanability.
Non-yellowing (UV resistant)
Quick drying (10-15 min.)
Protective layer for many metal surfaces
Gloss repair of old coatings
Provides extra durability to metallic and fluorescent coatings
Rust-Oleum Hard Hat 2500 Transparent Protection can also be used to restore the gloss and life expectancy of any faded old coatings. Rust-Oleum Hard Hat 2500 Transparent Protection can also be applied directly onto many surfaces like aluminium, brass, bronze, chrome, copper, etc. Ideal for small maintenance jobs and industrial touch-up.
Features & Benefits
Protection of copper, chrome, silver, bronze, nickel, aluminium
Extra durability to metallic/fluorescent coatings
Non-yellowing (UV-resistant)
To handle after 30 minutes (at 20°C)
Heat-resistant up to 100°C
Technical
Gloss Level: Gloss
Propellant: Dimethyl ether
Heat Resistance: 100°C (dry heat)
For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C
Further application recommendation and instructions can be found on the product data sheet.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
2500
Data sheet
Base Type
Fast drying acrylic resin
Application
Spray
Dry to Handle (at 20°C)
30 minutes
Dry to Recoat (at 20°C)
1 hour
Fully Cured (at 20°C)
3 days
Coverage
3.5 m² per spray can at 15 µm dry
Unit Contents
Aerosol
VOC
651 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum Hard Hat 2115 Aluminium offers a metallic appearance and durable protection - to be applied over Rust-Oleum Hard Hat Primers or properly prepared painted substrates. Heat resistant up to 100°C, ideal for maintenance and touch-up jobs in industrial environments.
Gloss or sparkling metallic appearance
To restore the metallic look...
Rust-Oleum Hard Hat Fluorescent Topcoats are a range of highly visible fluorescent coloured aerosol marking paints for use on railings, signs, machinery, walls, etc. in maintenance and industrial environments. Increased safety, useable internally and externaly.
Highly visible fluorescent coatings
Ideal for railings, signs, colour coding...
Rust-Oleum Hard Hat 2116 Stainless Steel Coating delivers double-acting protection (chemical and mechanical), providing a metallic appearance and durable protection to be applied over Rust-Oleum Hard Hat Primers or properly prepared painted substrates. Ideal for maintenance and touch-up jobs in industrial environments.
Greater abrasion...
Rust-Oleum Hard Hat 2111 Sparkling Aluminium (Topcoat Metallic) is a metallic finish spray ideal for maintenance and touch-up jobs in industrial environments on metal substrates. Heat-resistant up to 100°C it is Ideal for machinery, pumps, toolboxes, etc.
Gloss or sparkling metallic appearance
To restore the metallic look of many different...
Rust-Oleum Hard Hat Fluorescent Topcoats are a range of highly visible fluorescent coloured aerosol marking paints for use on railings, signs, machinery, walls, etc. in maintenance and industrial environments. Increased safety, useable internally and externaly.
Highly visible fluorescent coatings
Ideal for railings, signs, colour coding...
Cromadex 400 One Pack Lower Polyurethane Topcoat Aerosol is intended for touch up work on exterior metal. It has a long wet edge, is exterior durable, is lead and chromate-free and is available in 4 gloss levels.
Over 350 colours available from RAL & BS
NCS, metallic, sparkles and special matches may be available on request
Contact...
Cromadex 222 One Pack Fast Air Drying Alkyd Topcoat Aerosol is a one pack fast air drying topcoat aerosol for touch up. Fast drying, available in 4 gloss levels, exterior durable, lead and chromate free.
Over 350 colours available from RAL & BS
NCS, metallic, sparkles and special matches may be available on request
Contact our sales...
Coo-Var Hammercote Smooth Aerosol is a premium quality durable coating which provides a glossy smooth finish in a handy 400ml aerosol. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use....
Rust-Oleum CombiColor Aerosols are a one coat maintenance aerosol paint by Rust-Oleum for metal with superior metal protection, even direct to rust. As a primer and a topcoat in one that hides in one cross layer, CombiColor Aerosol is ideal for small maintenance and touch-up jobs.
Primer and topcoat in one
For application onto rust, bare...
Rust-Oleum Hard Hat Topcoat is the number 1 industrial paint aerosol, a top quality high performance topcoat available in 45 RAL colours for use on on bare metal, wood and concrete.
Convenient spray can topcoat for small maintenance jobs or for touch-up
Fast drying - touch dry in just 15 minutes (at 20°C)
Dry to handle in 30 minutes
Best...
Make spray painting jobs simple and comfortable with Rust-Oleum High Performance Comfort Grip. Its ergonomic design provides maximum control when using an aerosol paint, making it easy to complete large projects.
Coo-Var Road Line Marking Aerosol Paint is a fast drying line marking aerosol for use on many surfaces. Available in six colours. Quickly and easily apply markings to both indoor and outdoor surfaces.
Product Features
Touch dry within 30 mins
Overcoat in 2 hours
6 Colours to choose from
Ideal where speed and efficiency are important...
Rust-Oleum aerosols filled with Rust-Oleum CombiColor that can be produced in any RAL or BS colour in a Satin or Gloss finish! Ideal for small maintenance, touch-up jobs or one off special colours.
Primer and topcoat in one
For application onto rust, bare metal and wood
Hides in one cross layer
Ideal for touch-up and small objects...
Rust-Oleum Hard Hat 2111 Sparkling Aluminium (Topcoat Metallic) is a metallic finish spray ideal for maintenance and touch-up jobs in industrial environments on metal substrates. Heat-resistant up to 100°C it is Ideal for machinery, pumps, toolboxes, etc.
Gloss or sparkling metallic appearance
To restore the metallic look of many different...
A low odour vertical aerosol that is a stain killer and ceiling touch-up paint in one. Zinsser’s stain blocking primer technology is incorporated into this next generation product that offers a flat white finish, which matches most acoustic ceiling tiles and white ceiling paints.
Cromadex AQ40 One Pack Waterbased Air Drying Topcoat Aerosol for touch up which is fast drying, available in 4 gloss levels, exterior durable and is lead and chromate free.
Over 350 colours available from RAL & BS
NCS, metallic, sparkles and special matches may be available on request
Contact our sales team on 0113 2455450 or...
A quick-drying, non-yellowing, durable clear top coat from Rust-Oleum's expansive range that seals, protects and enhances painted surfaces including wood, metal, plastics, ceramics and more. The perfect top coat for a lasting professional finish.
Ultimate protective clear coating
Indoor/outdoor
Durable, corrosion-resistant
Cromadex 800 Two Pack Non-Isocyanate Acrylic Topcoat Aerosol for touch up. Fast drying, available in 4 gloss levels, exterior durable, isocyanate free, 8 hour pot life, lead and chromate free.
Over 350 colours available from RAL & BS
NCS, metallic, sparkles and special matches may be available on request
Contact our sales team on...
Rust-Oleum Hard Hat 2116 Stainless Steel Coating delivers double-acting protection (chemical and mechanical), providing a metallic appearance and durable protection to be applied over Rust-Oleum Hard Hat Primers or properly prepared painted substrates. Ideal for maintenance and touch-up jobs in industrial environments.
Greater abrasion...
Rust-Oleum Hard Hat 2115 Aluminium offers a metallic appearance and durable protection - to be applied over Rust-Oleum Hard Hat Primers or properly prepared painted substrates. Heat resistant up to 100°C, ideal for maintenance and touch-up jobs in industrial environments.
Gloss or sparkling metallic appearance
To restore the metallic look...
Scott on 2018-01-06 17:14:03
